Adds an error to the changesets errors list, and marks the change as valid?: false

@spec after_action(
  t(),
  (t(), Ash.Resource.record() ->
     {:ok, Ash.Resource.record()}
     | {:ok, Ash.Resource.record(), [Ash.Notifier.Notification.t()]}
     | {:error, term()})
) :: t()

Adds an after_action hook to the changeset.

@spec append_to_relationship(
  t(),
  atom(),
  Ash.Resource.record()
  | map()
  | term()
  | [Ash.Resource.record() | map() | term()],
  Keyword.t()
) :: t()

Appends a record or a list of records to a relationship.

Alias for:

manage_relationship(changeset, relationship, input,
  on_lookup: :relate, # If a record is not in the relationship, and can be found, relate it
  on_no_match: :error, # If a record is not found in the relationship or the database, we error
  on_match: :ignore, # If a record is found in the relationship we don't change it
  on_missing: :ignore, # If a record is not found in the input, we ignore it
)

Provide opts to customize/override the behavior.

@spec apply_attributes(t(), opts :: Keyword.t()) ::
  {:ok, Ash.Resource.record()} | {:error, t()}

Returns the original data with attribute changes merged, if the changeset is valid.

Options:

• force? - applies current attributes even if the changeset is not valid

@spec around_action(t(), (t(), around_callback() -> around_result())) :: t()

Adds an around_action hook to the changeset.

Your function will get the changeset, and a callback that must be called with a changeset (that may be modified). The callback will return {:ok, result, instructions} or {:error, error}. You can modify these values, but the return value must be one of those types. Instructions contains the notifications in its notifications key, i.e %{notifications: [%Ash.Resource.Notification{}, ...]}.

The around_action calls happen first, and then (after they each resolve their callbacks) the before_action hooks are called, followed by the action itself ocurring at the data layer and then the after_action hooks being run. Then, the code that appeared after the callbacks were called is then run.

For example:

changeset
|> Ash.Changeset.around_action(fn changeset, callback ->
  IO.puts("first around: before")
  result = callback.(changeset)
  IO.puts("first around: after")
end)
|> Ash.Changeset.around_action(fn changeset, callback ->
  IO.puts("second around: before")
  result = callback.(changeset)
  IO.puts("second around: after")
end)
|> Ash.Changeset.before_action(fn changeset ->
  IO.puts("first before")
  changeset
end)
|> Ash.Changeset.before_action(fn changeset ->
  IO.puts("second before")
  changeset
end)
|> Ash.Changeset.after_action(fn changeset, result ->
  IO.puts("first after")
  {:ok, result}
end)
|> Ash.Changeset.after_action(fn changeset ->
  IO.puts("second after")
  {:ok, result}
end)

This would print:

first around: before
second around: before
first before
second before
             <-- action happens here
first after
second after
second around: after <-- Notice that because of the callbacks, the after of the around hooks is reversed from the before
first around: after

Warning: using this without understanding how it works can cause big problems. You must call the callback function that is provided to your hook, and the return value must contain the same structure that was given to you, i.e {:ok, result_of_action, instructions}.

You can almost always get the same effect by using before_action, setting some context on the changeset and reading it out in an after_action hook.

@spec before_action(
  t(),
  (t() -> t() | {t(), %{notifications: [Ash.Notifier.Notification.t()]}})
) :: t()

Adds a before_action hook to the changeset.

@spec change_attribute(t(), atom(), any()) :: t()

Adds a change to the changeset, unless the value matches the existing value

@spec change_attributes(t(), map() | Keyword.t()) :: t()

Calls change_attribute/3 for each key/value pair provided

@spec change_default_attribute(t(), atom(), any()) :: t()

The same as change_attribute, but annotates that the attribute is currently holding a default value.

This information can be used in changes to see if a value was explicitly set or if it was set by being the default. Additionally, this is used in upsert actions to not overwrite existing values with the default

@spec change_new_attribute(t(), atom(), term()) :: t()

Change an attribute only if is not currently being changed

@spec change_new_attribute_lazy(t(), atom(), (() -> any())) :: t()

Change an attribute if is not currently being changed, by calling the provided function

Use this if you want to only perform some expensive calculation for an attribute value only if there isn't already a change for that attribute

@spec changing_attribute?(t(), atom()) :: boolean()

Returns true if an attribute exists in the changes

@spec changing_attributes?(t()) :: boolean()

Returns true if any attributes on the resource are being changed.

@spec changing_relationship?(t(), atom()) :: boolean()

Returns true if a relationship exists in the changes

Clears an attribute or relationship change off of the changeset

Remove an argument from the changeset

Ensure the the specified attributes are nil in the changeset results.

Ensures that the given attributes are selected.

The first call to select/2 will limit the fields to only the provided fields. Use ensure_selected/2 to say "select this field (or these fields) without deselecting anything else".

See select/2 for more.

@spec fetch_argument(t(), atom()) :: {:ok, term()} | :error

fetches the value of an argument provided to the changeset or :error

@spec fetch_argument_or_change(t(), atom()) :: {:ok, any()} | :error

Gets the value of an argument provided to the changeset, falling back to Ash.Changeset.fetch_change/2 if nothing was provided

@spec fetch_change(t(), atom()) :: {:ok, any()} | :error

Gets the new value for an attribute, or :error if it is not being changed

Constructs a changeset for a given action, and validates it.

Simply calls for_create/4, for_update/4 or for_destroy/4 based on the type of action passed in.

See those functions for more explanation.

Constructs a changeset for a given create action, and validates it.

Anything that is modified prior to for_create/4 is validated against the rules of the action, while anything after it is not. This runs any changes contained on your action. To have your logic execute only during the action, you can use after_action/2 or before_action/2.

Multitenancy is not validated until an action is called. This allows you to avoid specifying a tenant until just before calling the api action.

params

Params

params may be attributes, relationships, or arguments. You can safely pass user/form input directly into this function. Only public attributes and relationships are supported. If you want to change private attributes as well, see the Customization section below. params are stored directly as given in the params field of the changeset, which is used

opts

Opts

• :require? - If set to true, values are only required when the action is run (instead of immediately). The default value is false.

• :actor - set the actor, which can be used in any Ash.Resource.Changes configured on the action. (in the context argument)

• :authorize? - set authorize?, which can be used in any Ash.Resource.Changes configured on the action. (in the context argument)

• :tenant - set the tenant on the changeset

customization

Customization

A changeset can be provided as the first argument, instead of a resource, to allow setting specific attributes ahead of time.

For example:

MyResource
|> Ash.Changeset.new()
|> Ash.Changeset.change_attribute(:foo, 1)
|> Ash.Changeset.for_create(:create, ...opts)

Once a changeset has been validated by for_create/4 (or for_update/4), it isn't validated again in the action. New changes added are validated individually, though. This allows you to create a changeset according to a given action, and then add custom changes if necessary.

Constructs a changeset for a given destroy action, and validates it.

opts

Opts

• :actor - set the actor, which can be used in any Ash.Resource.Changes configured on the action. (in the context argument)
• :tenant - set the tenant on the changeset

Anything that is modified prior to for_destroy/4 is validated against the rules of the action, while anything after it is not.

Once a changeset has been validated by for_destroy/4, it isn't validated again in the action. New changes added are validated individually, though. This allows you to create a changeset according to a given action, and then add custom changes if necessary.

Constructs a changeset for a given update action, and validates it.

Anything that is modified prior to for_update/4 is validated against the rules of the action, while anything after it is not.

See for_create/4 for more information

@spec force_change_attribute(t(), atom(), any()) :: t()

Changes an attribute even if it isn't writable

@spec force_change_attributes(t(), map() | Keyword.t()) :: t()

Calls force_change_attribute/3 for each key/value pair provided

@spec force_change_new_attribute(t(), atom(), term()) :: t()

Force change an attribute if it is not currently being changed

See change_new_attribute/3 for more.

@spec force_change_new_attribute_lazy(t(), atom(), (() -> any())) :: t()

Force change an attribute if it is not currently being changed, by calling the provided function

See change_new_attribute_lazy/3 for more.

@spec get_argument(t(), atom()) :: term()

Gets the value of an argument provided to the changeset

@spec get_argument_or_attribute(t(), atom()) :: term()

Gets the value of an argument provided to the changeset, falling back to Ash.Changeset.get_attribute/2 if nothing was provided

@spec get_attribute(t(), atom()) :: term()

Gets the changing value or the original value of an attribute

@spec get_data(t(), atom()) :: term()

Gets the original value for an attribute

@spec handle_errors(
  t(),
  (t(), error :: term() ->
     :ignore | t() | (error :: term()) | {error :: term(), t()})
  | {module(), atom(), [term()]}
) :: t()

Sets a custom error handler on the changeset.

The error handler should be a two argument function or an mfa, in which case the first two arguments will be set to the changeset and the error, w/ the supplied arguments following those.

Any errors generated are passed to handle_errors, which can return any of the following:

• :ignore - the error is discarded, and the changeset is not marked as invalid
• changeset - a new (or the same) changeset. The error is not added (you'll want to add an error yourself), but the changeset is marked as invalid.
• {changeset, error} - a new (or the same) error and changeset. The error is added to the changeset, and the changeset is marked as invalid.
• anything_else - is treated as a new, transformed version of the error. The result is added as an error to the changeset, and the changeset is marked as invalid.

Manages the related records by creating, updating, or destroying them as necessary.

Keep in mind that the default values for all on_* are :ignore, meaning nothing will happen unless you provide instructions.

The input provided to manage_relationship should be a map, in the case of to_one relationships, or a list of maps in the case of to_many relationships. The following steps are followed for each input provided:

• The input is checked against the currently related records to find any matches. The primary key and unique identities are used to find matches.
• For any input that had a match in the current relationship, the :on_match behavior is triggered
• For any input that does not have a match:
  • if there is on_lookup behavior:
    • we try to find the record in the data layer.
    • if the record is found, the on_lookup behavior is triggered
    • if the record is not found, the on_no_match behavior is triggered
  • if there is no on_lookup behavior:
    • the on_no_match behavior is triggered
• finally, for any records present in the current relationship that had no match in the input, the on_missing behavior is triggered

options

Options

• :type - If the type is specified, the default values of each option is modified to match that type of operation.
  This allows for specifying certain operations much more succinctly. The defaults that are modified are listed below

replace

:replace

[

on_lookup: :relate,
on_no_match: :error,
on_match: :ignore,
on_missing: :unrelate

]

append

:append

[

on_lookup: :relate,
on_no_match: :error,
on_match: :ignore,
on_missing: :ignore

]

remove

:remove

[

on_no_match: :error,
on_match: :unrelate,
on_missing: :ignore

]

direct_control

:direct_control

[

on_lookup: :ignore,
on_no_match: :create,
on_match: :update,
on_missing: :destroy

]

create

:create

[

on_no_match: :create,
on_match: :ignore

]

• :authorize? - Authorize reads and changes to the destination records, if the primary change is being authorized as well. The default value is true.

• :eager_validate_with - Validates that any referenced entities exist before the action is being performed, using the provided api for the read. The default value is false.

• :on_no_match - instructions for handling records where no matching record existed in the relationship

  • :ignore(default) - those inputs are ignored
  • :match - For "has_one" and "belongs_to" only, any input is treated as a match for an existing value. For has_many and many_to_many, this is the same as :ignore.
  • :create - the records are created using the destination's primary create action
  • {:create, :action_name} - the records are created using the specified action on the destination resource
  • {:create, :action_name, :join_table_action_name, [:list, :of, :join_table, :params]} - Same as {:create, :action_name} but takes the list of params specified out and applies them when creating the join table row, with the provided join_table_action_name.
  • :error - an eror is returned indicating that a record would have been created
    • If on_lookup is set, and the data contained a primary key or identity, then the error is a NotFound error
    • Otherwise, an InvalidRelationship error is returned The default value is :ignore.

• :value_is_key - Configures what key to use when a single value is provided.
  This is useful when you use things like a list of strings i.e friend_emails to manage the relationship, instead of a list of maps.
  By default, we assume it is the primary key of the destination resource, unless it is a composite primary key.

• :identity_priority - The list, in priority order, of identities to use when looking up records for on_lookup, and matching records with on_match.
  Use :_primary_key to prioritize checking a match with the primary key. All identities, along with :_primary_key are checked regardless, this only allows ensuring that some are checked first. The default value is [:_primary_key].

• :use_identities - A list of identities that may be used to look up and compare records. Use :_primary_key to include the primary key. This does not determine the order that they are checked, use identity_priority for that. By default, all are used.

• :on_lookup - Before creating a record(because no match was found in the relationship), the record can be looked up and related.

  • :ignore(default) - Does not look for existing entries (matches in the current relationship are still considered updates)
  • :relate - Same as calling {:relate, primary_action_name}
  • {:relate, :action_name} - the records are looked up by primary key/the first identity that is found (using the primary read action), and related. The action should be:
    • many_to_many - a create action on the join resource
    • has_many - an update action on the destination resource
    • has_one - an update action on the destination resource
    • belongs_to - an update action on the source resource
  • {:relate, :action_name, :read_action_name} - Same as the above, but customizes the read action called to search for matches.
  • :relate_and_update - Same as :relate, but the remaining parameters from the lookup are passed into the action that is used to change the relationship key
  • {:relate_and_update, :action_name} - Same as the above, but customizes the action used. The action should be:
    • many_to_many - a create action on the join resource
    • has_many - an update action on the destination resource
    • has_one - an update action on the destination resource
    • belongs_to - an update action on the source resource
  • {:relate_and_update, :action_name, :read_action_name} - Same as the above, but customizes the read action called to search for matches.
  • {:relate_and_update, :action_name, :read_action_name, [:list, :of, :join_table, :params]} - Same as the above, but uses the provided list of parameters when creating the join row (only relevant for many to many relationships). Use :all to only update the join table row, and pass all parameters to its action The default value is :ignore.

• :on_match - instructions for handling records where a matching record existed in the relationship already

  • :ignore(default) - those inputs are ignored
  • :update - the record is updated using the destination's primary update action
  • {:update, :action_name} - the record is updated using the specified action on the destination resource
  • {:update, :action_name, :join_table_action_name, [:list, :of, :params]} - Same as {:update, :action_name} but takes the list of params specified out and applies them as an update to the join table row (only valid for many to many).
  • {:destroy, :action_name} - the record is destroyed using the specified action on the destination resource. The action should be:
    • many_to_many - a destroy action on the join table
    • has_many - a destroy action on the destination resource
    • has_one - a destroy action on the destination resource
    • belongs_to - a destroy action on the destination resource
  • :error - an eror is returned indicating that a record would have been updated
  • :no_match - ignores the primary key match and follows the on_no_match instructions with these records instead.
  • :unrelate - the related item is not destroyed, but the data is "unrelated", making this behave like remove_from_relationship/3. The action should be:
    • many_to_many - the join resource row is destroyed
    • has_many - the destination_field (on the related record) is set to nil
    • has_one - the destination_field (on the related record) is set to nil
    • belongs_to - the source_field (on this record) is set to nil
  • {:unrelate, :action_name} - the record is unrelated using the provided update action. The action should be:
    • many_to_many - a destroy action on the join resource
    • has_many - an update action on the destination resource
    • has_one - an update action on the destination resource
    • belongs_to - an update action on the source resource The default value is :ignore.

• :on_missing - instructions for handling records that existed in the current relationship but not in the input

  • :ignore(default) - those inputs are ignored
  • :destroy - the record is destroyed using the destination's primary destroy action
  • {:destroy, :action_name} - the record is destroyed using the specified action on the destination resource
  • {:destroy, :action_name, :join_resource_action_name, [:join, :keys]} - the record is destroyed using the specified action on the destination resource, but first the join resource is destroyed with its specified action
  • :error - an error is returned indicating that a record would have been updated
  • :unrelate - the related item is not destroyed, but the data is "unrelated", making this behave like remove_from_relationship/3. The action should be:
    • many_to_many - the join resource row is destroyed
    • has_many - the destination_field (on the related record) is set to nil
    • has_one - the destination_field (on the related record) is set to nil
    • belongs_to - the source_field (on this record) is set to nil
  • {:unrelate, :action_name} - the record is unrelated using the provided update action. The action should be:
    • many_to_many - a destroy action on the join resource
    • has_many - an update action on the destination resource
    • has_one - an update action on the destination resource
    • belongs_to - an update action on the source resource The default value is :ignore.

• :error_path - By default, errors added to the changeset will use the path [:relationship_name], or [:relationship_name, <index>]. If you want to modify this path, you can specify error_path, e.g if had a change on an action that takes an argument and uses that argument data to call manage_relationship, you may want any generated errors to appear under the name of that argument, so you could specify error_path: :argument_name when calling manage_relationship.

• :meta - Freeform data that will be retained along with the options, which can be used to track/manage the changes that are added to the relationships key.

• :ignore? - This tells Ash to ignore the provided inputs when actually running the action. This can be useful for building up a set of instructions that you intend to handle manually The default value is false.

Each call to this function adds new records that will be handled according to their options. For example, if you tracked "tags to add" and "tags to remove" in separate fields, you could input them like so:

changeset
|> Ash.Changeset.manage_relationship(
  :tags,
  [%{name: "backend"}],
  on_lookup: :relate, #relate that tag if it exists in the database
  on_no_match: :error # error if a tag with that name doesn't exist
)
|> Ash.Changeset.manage_relationship(
  :tags,
  [%{name: "frontend"}],
  on_no_match: :error, # error if a tag with that name doesn't exist in the relationship
  on_match: :unrelate # if a tag with that name is related, unrelate it
)

When calling this multiple times with the on_missing option set, the list of records that are considered missing are checked after each set of inputs is processed. For example, if you manage the relationship once with on_missing: :unrelate, the records missing from your input will be removed, and then your next call to manage_relationship will be resolved (with those records unrelated). For this reason, it is suggested that you don't call this function multiple times with an on_missing instruction, as you may be surprised by the result.

If you want the input to update existing entities, you need to ensure that the primary key (or unique identity) is provided as part of the input. See the example below:

changeset
|> Ash.Changeset.manage_relationship(
  :comments,
  [%{rating: 10, contents: "foo"}],
  on_no_match: {:create, :create_action},
  on_missing: :ignore
)
|> Ash.Changeset.manage_relationship(
  :comments,
  [%{id: 10, rating: 10, contents: "foo"}],
  on_match: {:update, :update_action},
  on_no_match: {:create, :create_action})

This is a simple way to manage a relationship. If you need custom behavior, you can customize the action that is called, which allows you to add arguments/changes. However, at some point you may want to forego this function and make the changes yourself. For example:

input = [%{id: 10, rating: 10, contents: "foo"}]

changeset
|> Ash.Changeset.after_action(fn _changeset, result ->
  # An example of updating comments based on a result of other changes
  for comment <- input do
    comment = MyApi.get(Comment, comment.id)

    comment
    |> Map.update(:rating, 0, &(&1 * result.rating_weight))
    |> MyApi.update!()
  end

  {:ok, result}
end)

using-records-as-input

Using records as input

Records can be supplied as the input values. If you do:

• if it would be looked up due to on_lookup, the record is used as-is
• if it would be created due to on_no_match, the record is used as-is
• Instead of specifying join_keys, those keys must go in __metadata__.join_keys. If join_keys is specified in the options, it is ignored.

For example:

post1 =
  changeset
  |> Api.create!()
  |> Ash.Resource.Info.put_metadata(:join_keys, %{type: "a"})

post1 =
  changeset2
  |> Api.create!()
  |> Ash.Resource.Info.put_metadata(:join_keys, %{type: "b"})

author = Api.create!(author_changeset)

Ash.Changeset.manage_relationship(
  author,
  :posts,
  [post1, post2],
  on_lookup: :relate
)

@spec new(Ash.Resource.t() | Ash.Resource.record(), params :: map()) :: t()

Return a changeset over a resource or a record. params can be either attributes, relationship values or arguments.

If you are using external input, you almost certainly want to use Ash.Changeset.for_<action_type>. However, you can use Ash.Changeset.new/2 to start a changeset and make a few changes prior to calling for_action. For example:

Ash.Changeset.new()
|> Ash.Changeset.change_attribute(:name, "foobar")
|> Ash.Changeset.for_action(...)

Anything that is modified prior to for_action is validated against the rules of the action, while anything after it is not.

This changeset does not consider an action, and so allows you to change things with minimal validation. Values are validated when changed, and the existence of attributes and relationships are validated. If you want to essentially "run an action", and get back a changeset with any errors that would be generated by that action (with the exception of errors that can only be generated by the data layer), use for_action/4.

Additionally, this format only supports supplying attributes in the params. This is because we don't know what the behavior should be for relationship changes, nor what arguments are available. You can manage them yourself with the functions that allow managing arguments/relationships that are provided in this module, e.g set_argument/3 and replace_relationship/3

@spec put_context(t(), atom(), term()) :: t()

Puts a key/value in the changeset context that can be used later

Do not use the private key in your custom context, as that is reserved for internal use.

@spec remove_from_relationship(
  t(),
  atom(),
  Ash.Resource.record()
  | map()
  | term()
  | [Ash.Resource.record() | map() | term()],
  Keyword.t()
) :: t()

Removes a record or a list of records to a relationship.

Alias for:

  manage_relationship(changeset, relationship, record_or_records,
    on_no_match: :error, # If a record is not found in the relationship, we error
    on_match: :unrelate, # If a record is found in the relationship we unrelate it
    on_missing: :ignore, # If a record is not found in the relationship
    authorize?: false
  )

@spec replace_relationship(
  t(),
  atom(),
  Ash.Resource.record()
  | map()
  | term()
  | [Ash.Resource.record() | map() | term()]
  | nil,
  Keyword.t()
) :: t()

Alias for:

manage_relationship(
  changeset,
  relationship,
  record_or_records,
  on_lookup: :relate, # If a record is not found in the relationship, but is found in the database, relate it and apply the input as an update
  on_no_match: :error, # If a record is not found in the relationship or the database, we error
  on_match: :ignore, # If a record is found in the relationship we make no changes to it
  on_missing: :unrelate, # If a record is not found in the relationship, we unrelate it
  authorize?: false
)

Ensure that only the specified attributes are present in the results.

The first call to select/2 will replace the default behavior of selecting all attributes. Subsequent calls to select/2 will combine the provided fields unless the replace? option is provided with a value of true.

If a field has been deselected, selecting it again will override that (because a single list of fields is tracked for selection)

Primary key attributes always selected and cannot be deselected.

When attempting to load a relationship (or manage it with Ash.Changeset.manage_relationship/3), if the source field is not selected on the query/provided data an error will be produced. If loading a relationship with a query, an error is produced if the query does not select the destination field of the relationship.

Datalayers currently are not notified of the select for a changeset(unlike queries), and creates/updates select all fields when they are performed. A select provided on a changeset simply sets the unselected fields to nil before returning the result.

Use ensure_selected/2 if you simply wish to make sure a field has been selected, without deselecting any other fields.

Add an argument to the changeset, which will be provided to the action

Merge a map of arguments to the arguments list

@spec set_context(t(), map() | nil) :: t()

Deep merges the provided map into the changeset context that can be used later

Do not use the private key in your custom context, as that is reserved for internal use.

@spec with_hooks(
  t(),
  (t() ->
     {:ok, term(), %{notifications: [Ash.Notifier.Notification.t()]}}
     | {:error, term()})
) ::
  {:ok, term(), t(), %{notifications: [Ash.Notifier.Notification.t()]}}
  | {:error, term()}

Wraps a function in the before/after action hooks of a changeset.

The function takes a changeset and if it returns {:ok, result}, the result will be passed through the after action hooks.