BACnet.Protocol.FaultParameters.FaultLifeSafety (bacstack v0.0.1)

View Source

Represents the BACnet fault algorithm FaultLifeSafety parameters.

The FAULT_LIFE_SAFETY fault algorithm detects whether the monitored value equals a value that is listed as a fault value. The monitored value is of type BACnetLifeSafetyState. If internal operational reliability is unreliable, then the internal reliability takes precedence over evaluation of the monitored value.

In addition, this algorithm monitors a life safety mode value. If reliability is MULTI_STATE_FAULT, then new transitions to MULTI_STATE_FAULT are indicated upon change of the mode value.

For more specific information about the fault algorithm, consult ASHRAE 135 13.4.4.

Summary

Types

t()

Representative type for the fault parameter.

Types

t()

@type t() :: %BACnet.Protocol.FaultParameters.FaultLifeSafety{
  fault_values: [BACnet.Protocol.Constants.life_safety_state()],
  mode: BACnet.Protocol.DeviceObjectPropertyRef.t()
}

Representative type for the fault parameter.