This command enables Simple Pairing mode in the BR/EDR Controller.

• OGF: 0x3
• OCF: 0x56
• Opcode: "V\f"

Bluetooth Spec v5.2, Vol 4, Part E, section 7.3.59

When Simple Pairing Mode is set to 'enabled' the Link Manager shall respond to an LMP_IO_CAPABILITY_REQ PDU with an LMP_IO_CAPABILITY_RES PDU and continue with the subsequent pairing procedure. When Simple Pairing mode is set to 'disabled', the Link Manager shall reject an IO capability request. A Host shall not set the Simple Pairing Mode to ‘disabled.’

Until Write_Simple_Pairing_Mode is received by the BR/EDR Controller, it shall not support any Simple Pairing sequences, and shall return the error code Simple Pairing not Supported by Host (0x37). This command shall be written before initiating page scan or paging procedures.

The Link Manager Secure Simple Pairing (Host Support) feature bit shall be set to the Simple_Pairing_Mode parameter. The default value for Simple_Pairing_Mode shall be 'disabled.' When Simple_Pairing_Mode is set to 'enabled,' the bit in the LMP features mask indicating support for Secure Simple Pairing (Host Support) shall be set to enabled in subsequent responses to an LMP_FEATURES_REQ from a remote device.

Command Parameters

• enabled - boolean to set if pairing mode enabled. Default false

Return Parameters

• :status - see BlueHeron.ErrorCode