View Source Ecto.Repo behaviour (Ecto v3.9.3)
Defines a repository.
A repository maps to an underlying data store, controlled by the adapter. For example, Ecto ships with a Postgres adapter that stores data into a PostgreSQL database.
When used, the repository expects the :otp_app
and :adapter
as
option. The :otp_app
should point to an OTP application that has
the repository configuration. For example, the repository:
defmodule Repo do
use Ecto.Repo,
otp_app: :my_app,
adapter: Ecto.Adapters.Postgres
end
Could be configured with:
config :my_app, Repo,
database: "ecto_simple",
username: "postgres",
password: "postgres",
hostname: "localhost"
Most of the configuration that goes into the config
is specific
to the adapter. For this particular example, you can check
Ecto.Adapters.Postgres
for more information. In spite of this, the following configuration values
are shared across all adapters:
:name
- The name of the Repo supervisor process:priv
- the directory where to keep repository data, like migrations, schema and more. Defaults to "priv/YOUR_REPO". It must always point to a subdirectory inside the priv directory:url
- an URL that specifies storage information. Read below for more information:log
- the log level used when logging the query with Elixir's Logger. Can be any of Logger.level/0 values orfalse
. If false, disables logging for that repository. Defaults to:debug
:pool_size
- the size of the pool used by the connection module. Defaults to10
:telemetry_prefix
- we recommend adapters to publish events using theTelemetry
library. By default, the telemetry prefix is based on the module name, so if your module is calledMyApp.Repo
, the prefix will be[:my_app, :repo]
. See the "Telemetry Events" section to see which events we recommend adapters to publish. Note that if you have multiple databases, you should keep the:telemetry_prefix
consistent for each repo and use the:repo
property in the event metadata for distinguishing between repos.:stacktrace
- when true, publishes the stacktrace in telemetry events and allows more advanced logging.
urls
URLs
Repositories by default support URLs. For example, the configuration above could be rewritten to:
config :my_app, Repo,
url: "ecto://postgres:postgres@localhost/ecto_simple"
The schema can be of any value. The path represents the database name while options are simply merged in.
URL can include query parameters to override shared and adapter-specific
options, like ssl
, timeout
and pool_size
. The following example
shows how to pass these configuration values:
config :my_app, Repo,
url: "ecto://postgres:postgres@localhost/ecto_simple?ssl=true&pool_size=10"
In case the URL needs to be dynamically configured, for example by
reading a system environment variable, such can be done via the
init/2
repository callback:
def init(_type, config) do
{:ok, Keyword.put(config, :url, System.get_env("DATABASE_URL"))}
end
shared-options
Shared options
Almost all of the repository functions outlined in this module accept the following options:
:timeout
- The time in milliseconds (as an integer) to wait for the query call to finish.:infinity
will wait indefinitely (default:15_000
):log
- Can be any of theLogger.level/0
values orfalse
. Iffalse
, logging is disabled. Defaults to the configured Repo logger level:telemetry_event
- The telemetry event name to dispatch the event under. See the next section for more information:telemetry_options
- Extra options to attach to telemetry event name. See the next section for more information
telemetry-events
Telemetry events
There are two types of telemetry events. The ones emitted by Ecto and the ones that are adapter specific.
ecto-telemetry-events
Ecto telemetry events
The following events are emitted by all Ecto repositories:
[:ecto, :repo, :init]
- it is invoked whenever a repository starts. The measurement is a singlesystem_time
entry in native unit. The metadata is the:repo
and all initialization options under:opts
.
adapter-specific-events
Adapter-specific events
We recommend adapters to publish certain Telemetry
events listed below.
Those events will use the :telemetry_prefix
outlined above which defaults
to [:my_app, :repo]
.
For instance, to receive all query events published by a repository called
MyApp.Repo
, one would define a module:
defmodule MyApp.Telemetry do
def handle_event([:my_app, :repo, :query], measurements, metadata, config) do
IO.inspect binding()
end
end
Then, in the Application.start/2
callback, attach the handler to this event using
a unique handler id:
:ok = :telemetry.attach("my-app-handler-id", [:my_app, :repo, :query], &MyApp.Telemetry.handle_event/4, %{})
For details, see the telemetry documentation.
Below we list all events developers should expect from Ecto. All examples
below consider a repository named MyApp.Repo
:
[:my_app, :repo, :query]
This event should be invoked on every query sent to the adapter, including queries that are related to the transaction management.
The :measurements
map may include the following, all given in the
:native
time unit:
:idle_time
- the time the connection spent waiting before being checked out for the query:queue_time
- the time spent waiting to check out a database connection:query_time
- the time spent executing the query:decode_time
- the time spent decoding the data received from the database:total_time
- the sum of (queue_time
,query_time
, anddecode_time
)️
All measurements are given in the :native
time unit. You can read more
about it in the docs for System.convert_time_unit/3
.
A telemetry :metadata
map including the following fields. Each database
adapter may emit different information here. For Ecto.SQL databases, it
will look like this:
:type
- the type of the Ecto query. For example, for Ecto.SQL databases, it would be:ecto_sql_query
:repo
- the Ecto repository:result
- the query result:params
- the dumped query parameters (formatted for database drivers like Postgrex):cast_params
- the casted query parameters (normalized before dumping):query
- the query sent to the database as a string:source
- the source the query was made on (may benil
):stacktrace
- the stacktrace information, if enabled, ornil
:options
- extra options given to the repo operation under:telemetry_options
read-only-repositories
Read-only repositories
You can mark a repository as read-only by passing the :read_only
flag on use
:
use Ecto.Repo, otp_app: ..., adapter: ..., read_only: true
By passing the :read_only
option, none of the functions that perform
write operations, such as insert/2
, insert_all/3
, update_all/3
,
and friends will be defined.
Link to this section Summary
Query API
Calculate the given aggregate
.
Calculate the given aggregate
over the given field
.
Fetches all entries from the data store matching the given query.
Deletes all entries matching the given query.
Checks if there exists an entry that matches the given query.
Fetches a single struct from the data store where the primary key matches the given id.
Similar to get/3
but raises Ecto.NoResultsError
if no record was found.
Fetches a single result from the query.
Similar to get_by/3
but raises Ecto.NoResultsError
if no record was found.
Fetches a single result from the query.
Similar to one/2
but raises Ecto.NoResultsError
if no record was found.
Returns a lazy enumerable that emits all entries from the data store matching the given query.
Updates all entries matching the given query with the given values.
Schema API
Deletes a struct using its primary key.
Same as delete/2
but returns the struct or raises if the changeset is invalid.
Inserts a struct defined via Ecto.Schema
or a changeset.
Same as insert/2
but returns the struct or raises if the changeset is invalid.
Inserts all entries into the repository.
Inserts or updates a changeset depending on whether the struct is persisted or not.
Same as insert_or_update/2
but returns the struct or raises if the changeset
is invalid.
Loads data
into a schema or a map.
Preloads all associations on the given struct or structs.
Reloads a given schema or schema list from the database.
Similar to reload/2
, but raises when something is not found.
Updates a changeset using its primary key.
Same as update/2
but returns the struct or raises if the changeset is invalid.
Transaction API
Returns true if a connection has been checked out.
Checks out a connection for the duration of the function.
Returns true if the current process is inside a transaction.
Rolls back the current transaction.
Runs the given function or Ecto.Multi
inside a transaction.
Runtime API
Returns the adapter tied to the repository.
Returns the adapter configuration stored in the :otp_app
environment.
Returns the atom name or pid of the current repository.
Sets the dynamic repository to be used in further interactions.
Starts any connection pooling or supervision and return {:ok, pid}
or just :ok
if nothing needs to be done.
Shuts down the repository.
User callbacks
A user customizable callback invoked to retrieve default options for operations.
A callback executed when the repo starts or when configuration is read.
A user customizable callback invoked for query-based operations.
Functions
Returns all running Ecto repositories.
Link to this section Types
@type t() :: module()
Link to this section Query API
@callback aggregate( queryable :: Ecto.Queryable.t(), aggregate :: :count, opts :: Keyword.t() ) :: term() | nil
Calculate the given aggregate
.
If the query has a limit, offset, distinct or combination set, it will be automatically wrapped in a subquery in order to return the proper result.
Any preload or select in the query will be ignored in favor of the column being aggregated.
The aggregation will fail if any group_by
field is set.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
examples
Examples
# Returns the number of blog posts
Repo.aggregate(Post, :count)
# Returns the number of blog posts in the "private" schema path
# (in Postgres) or database (in MySQL)
Repo.aggregate(Post, :count, prefix: "private")
@callback aggregate( queryable :: Ecto.Queryable.t(), aggregate :: :avg | :count | :max | :min | :sum, field :: atom(), opts :: Keyword.t() ) :: term() | nil
Calculate the given aggregate
over the given field
.
See aggregate/3
for general considerations and options.
examples
Examples
# Returns the number of visits per blog post
Repo.aggregate(Post, :count, :visits)
# Returns the number of visits per blog post in the "private" schema path
# (in Postgres) or database (in MySQL)
Repo.aggregate(Post, :count, :visits, prefix: "private")
# Returns the average number of visits for the top 10
query = from Post, limit: 10
Repo.aggregate(query, :avg, :visits)
@callback all(queryable :: Ecto.Queryable.t(), opts :: Keyword.t()) :: [ Ecto.Schema.t() | term() ]
Fetches all entries from the data store matching the given query.
May raise Ecto.QueryError
if query validation fails.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
example
Example
# Fetch all post titles
query = from p in Post,
select: p.title
MyRepo.all(query)
@callback delete_all(queryable :: Ecto.Queryable.t(), opts :: Keyword.t()) :: {non_neg_integer(), nil | [term()]}
Deletes all entries matching the given query.
It returns a tuple containing the number of entries and any returned
result as second element. The second element is nil
by default
unless a select
is supplied in the delete query. Note, however,
not all databases support returning data from DELETEs.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set in the schema.
See the "Shared options" section at the module documentation for remaining options.
examples
Examples
MyRepo.delete_all(Post)
from(p in Post, where: p.id < 10) |> MyRepo.delete_all
@callback exists?(queryable :: Ecto.Queryable.t(), opts :: Keyword.t()) :: boolean()
Checks if there exists an entry that matches the given query.
Returns a boolean.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
examples
Examples
# checks if any posts exist
Repo.exists?(Post)
# checks if any posts exist in the "private" schema path (in Postgres) or
# database (in MySQL)
Repo.exists?(Post, schema: "private")
# checks if any post with a like count greater than 10 exists
query = from p in Post, where: p.like_count > 10
Repo.exists?(query)
@callback get(queryable :: Ecto.Queryable.t(), id :: term(), opts :: Keyword.t()) :: Ecto.Schema.t() | term() | nil
Fetches a single struct from the data store where the primary key matches the given id.
Returns nil
if no result was found. If the struct in the queryable
has no or more than one primary key, it will raise an argument error.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
example
Example
MyRepo.get(Post, 42)
MyRepo.get(Post, 42, prefix: "public")
@callback get!(queryable :: Ecto.Queryable.t(), id :: term(), opts :: Keyword.t()) :: Ecto.Schema.t() | term()
Similar to get/3
but raises Ecto.NoResultsError
if no record was found.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
example
Example
MyRepo.get!(Post, 42)
MyRepo.get!(Post, 42, prefix: "public")
@callback get_by( queryable :: Ecto.Queryable.t(), clauses :: Keyword.t() | map(), opts :: Keyword.t() ) :: Ecto.Schema.t() | term() | nil
Fetches a single result from the query.
Returns nil
if no result was found. Raises if more than one entry.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
example
Example
MyRepo.get_by(Post, title: "My post")
MyRepo.get_by(Post, [title: "My post"], prefix: "public")
@callback get_by!( queryable :: Ecto.Queryable.t(), clauses :: Keyword.t() | map(), opts :: Keyword.t() ) :: Ecto.Schema.t() | term()
Similar to get_by/3
but raises Ecto.NoResultsError
if no record was found.
Raises if more than one entry.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
example
Example
MyRepo.get_by!(Post, title: "My post")
MyRepo.get_by!(Post, [title: "My post"], prefix: "public")
@callback one(queryable :: Ecto.Queryable.t(), opts :: Keyword.t()) :: Ecto.Schema.t() | term() | nil
Fetches a single result from the query.
Returns nil
if no result was found. Raises if more than one entry.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
examples
Examples
Repo.one(from p in Post, join: c in assoc(p, :comments), where: p.id == ^post_id)
query = from p in Post, join: c in assoc(p, :comments), where: p.id == ^post_id
Repo.one(query, prefix: "private")
@callback one!(queryable :: Ecto.Queryable.t(), opts :: Keyword.t()) :: Ecto.Schema.t() | term()
Similar to one/2
but raises Ecto.NoResultsError
if no record was found.
Raises if more than one entry.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.
See the "Shared options" section at the module documentation for more options.
@callback stream(queryable :: Ecto.Queryable.t(), opts :: Keyword.t()) :: Enum.t()
Returns a lazy enumerable that emits all entries from the data store matching the given query.
SQL adapters, such as Postgres and MySQL, can only enumerate a stream inside a transaction.
May raise Ecto.QueryError
if query validation fails.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This will be applied to allfrom
andjoin
s in the query that did not have a prefix previously given either via the:prefix
option onjoin
/from
or via@schema_prefix
in the schema. For more information see the "Query Prefix" section of theEcto.Query
documentation.:max_rows
- The number of rows to load from the database as we stream. It is supported at least by Postgres and MySQL and defaults to 500.
See the "Shared options" section at the module documentation for more options.
example
Example
# Fetch all post titles
query = from p in Post,
select: p.title
stream = MyRepo.stream(query)
MyRepo.transaction(fn ->
Enum.to_list(stream)
end)
@callback update_all( queryable :: Ecto.Queryable.t(), updates :: Keyword.t(), opts :: Keyword.t() ) :: {non_neg_integer(), nil | [term()]}
Updates all entries matching the given query with the given values.
It returns a tuple containing the number of entries and any returned
result as second element. The second element is nil
by default
unless a select
is supplied in the update query. Note, however,
not all databases support returning data from UPDATEs.
Keep in mind this update_all
will not update autogenerated
fields like the updated_at
columns.
See Ecto.Query.update/3
for update operations that can be
performed on fields.
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set in the schema.
See the "Shared options" section at the module documentation for remaining options.
examples
Examples
MyRepo.update_all(Post, set: [title: "New title"])
MyRepo.update_all(Post, inc: [visits: 1])
from(p in Post, where: p.id < 10, select: p.visits)
|> MyRepo.update_all(set: [title: "New title"])
from(p in Post, where: p.id < 10, update: [set: [title: "New title"]])
|> MyRepo.update_all([])
from(p in Post, where: p.id < 10, update: [set: [title: ^new_title]])
|> MyRepo.update_all([])
from(p in Post, where: p.id < 10, update: [set: [title: fragment("upper(?)", ^new_title)]])
|> MyRepo.update_all([])
from(p in Post, where: p.id < 10, update: [set: [visits: p.visits * 1000]])
|> MyRepo.update_all([])
Link to this section Schema API
@callback delete( struct_or_changeset :: Ecto.Schema.t() | Ecto.Changeset.t(), opts :: Keyword.t() ) :: {:ok, Ecto.Schema.t()} | {:error, Ecto.Changeset.t()}
Deletes a struct using its primary key.
If the struct has no primary key, Ecto.NoPrimaryKeyFieldError
will be raised. If the struct has been removed prior to the call,
Ecto.StaleEntryError
will be raised. If more than one database
operation is required, they're automatically wrapped in a transaction.
It returns {:ok, struct}
if the struct has been successfully
deleted or {:error, changeset}
if there was a validation
or a known constraint error. By default, constraint errors will
raise the Ecto.ConstraintError
exception, unless a changeset is
given as the first argument with the relevant constraints declared
in it (see Ecto.Changeset
).
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set in the schema.:stale_error_field
- The field where stale errors will be added in the returning changeset. This option can be used to avoid raisingEcto.StaleEntryError
.:stale_error_message
- The message to add to the configured:stale_error_field
when stale errors happen, defaults to "is stale".
See the "Shared options" section at the module documentation for more options.
example
Example
post = MyRepo.get!(Post, 42)
case MyRepo.delete post do
{:ok, struct} -> # Deleted with success
{:error, changeset} -> # Something went wrong
end
@callback delete!( struct_or_changeset :: Ecto.Schema.t() | Ecto.Changeset.t(), opts :: Keyword.t() ) :: Ecto.Schema.t()
Same as delete/2
but returns the struct or raises if the changeset is invalid.
@callback insert( struct_or_changeset :: Ecto.Schema.t() | Ecto.Changeset.t(), opts :: Keyword.t() ) :: {:ok, Ecto.Schema.t()} | {:error, Ecto.Changeset.t()}
Inserts a struct defined via Ecto.Schema
or a changeset.
In case a struct is given, the struct is converted into a changeset with all non-nil fields as part of the changeset.
In case a changeset is given, the changes in the changeset are merged with the struct fields, and all of them are sent to the database. If more than one database operation is required, they're automatically wrapped in a transaction.
It returns {:ok, struct}
if the struct has been successfully
inserted or {:error, changeset}
if there was a validation
or a known constraint error.
options
Options
:returning
- selects which fields to return. It accepts a list of fields to be returned from the database. Whentrue
, returns all fields. Whenfalse
, no extra fields are returned. It will always include all fields inread_after_writes
as well as any autogenerated id. Not all databases support this option and it may not be available during upserts. See the "Upserts" section for more information.:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set any schemas. Also, the@schema_prefix
for the parent record will override all default@schema_prefix
s set in any child schemas for associations.:on_conflict
- It may be one of:raise
(the default),:nothing
,:replace_all
,{:replace_all_except, fields}
,{:replace, fields}
, a keyword list of update instructions or anEcto.Query
query for updates. See the "Upserts" section for more information.:conflict_target
- A list of column names to verify for conflicts. It is expected those columns to have unique indexes on them that may conflict. If none is specified, the conflict target is left up to the database. It may also be{:unsafe_fragment, binary_fragment}
to pass any expression to the database without any sanitization, this is useful for partial index or index with expressions, such as{:unsafe_fragment, "(coalesce(firstname, ""), coalesce(lastname, "")) WHERE middlename IS NULL"}
forON CONFLICT (coalesce(firstname, ""), coalesce(lastname, "")) WHERE middlename IS NULL
SQL query.:stale_error_field
- The field where stale errors will be added in the returning changeset. This option can be used to avoid raisingEcto.StaleEntryError
.:stale_error_message
- The message to add to the configured:stale_error_field
when stale errors happen, defaults to "is stale".
See the "Shared options" section at the module documentation for more options.
examples
Examples
A typical example is calling MyRepo.insert/1
with a struct
and acting on the return value:
case MyRepo.insert %Post{title: "Ecto is great"} do
{:ok, struct} -> # Inserted with success
{:error, changeset} -> # Something went wrong
end
upserts
Upserts
insert/2
provides upserts (update or inserts) via the :on_conflict
option. The :on_conflict
option supports the following values:
:raise
- raises if there is a conflicting primary key or unique index:nothing
- ignores the error in case of conflicts:replace_all
- replace all values on the existing row with the values in the schema/changeset, including fields not explicitly set in the changeset, such as IDs and autogenerated timestamps (inserted_at
andupdated_at
). Do not use this option if you have auto-incrementing primary keys, as they will also be replaced. You most likely want to use{:replace_all_except, [:id]}
or{:replace, fields}
explicitly instead. This option requires a schema{:replace_all_except, fields}
- same as above except the given fields are not replaced. This option requires a schema{:replace, fields}
- replace only specific columns. This option requires:conflict_target
a keyword list of update instructions - such as the one given to
update_all/3
, for example:[set: [title: "new title"]]
an
Ecto.Query
that will act as anUPDATE
statement, such as the one given toupdate_all/3
. Similarly toupdate_all/3
, auto generated values, such as timestamps are not automatically updated. If the struct cannot be found,Ecto.StaleEntryError
will be raised.
Upserts map to "ON CONFLICT" on databases like Postgres and "ON DUPLICATE KEY" on databases such as MySQL.
As an example, imagine :title
is marked as a unique column in
the database:
{:ok, inserted} = MyRepo.insert(%Post{title: "this is unique"})
Now we can insert with the same title but do nothing on conflicts:
{:ok, ignored} = MyRepo.insert(%Post{title: "this is unique"}, on_conflict: :nothing)
Because we used on_conflict: :nothing
, instead of getting an error,
we got {:ok, struct}
. However the returned struct does not reflect
the data in the database. If the primary key is auto-generated by the
database, the primary key in the ignored
record will be nil if there
was no insertion. For example, if you use the default primary key
(which has name :id
and a type of :id
), then ignored.id
above
will be nil if there was no insertion.
If your id is generated by your application (typically the case for
:binary_id
) or if you pass another value for :on_conflict
, detecting
if an insert or update happened is slightly more complex, as the database
does not actually inform us what happened. Let's insert a post with the
same title but use a query to update the body column in case of conflicts:
# In Postgres (it requires the conflict target for updates):
on_conflict = [set: [body: "updated"]]
{:ok, updated} = MyRepo.insert(%Post{title: "this is unique"},
on_conflict: on_conflict, conflict_target: :title)
# In MySQL (conflict target is not supported):
on_conflict = [set: [title: "updated"]]
{:ok, updated} = MyRepo.insert(%Post{id: inserted.id, title: "updated"},
on_conflict: on_conflict)
In the examples above, even though it returned :ok
, we do not know
if we inserted new data or if we updated only the :on_conflict
fields.
In case an update happened, the data in the struct most likely does
not match the data in the database. For example, autogenerated fields
such as inserted_at
will point to now rather than the time the
struct was actually inserted.
If you need to guarantee the data in the returned struct mirrors the database, you have three options:
Use
on_conflict: :replace_all
, although that will replace all fields in the database with the ones in the struct/changeset, including autogenerated fields such asinserted_at
andupdated_at
:MyRepo.insert(%Post{title: "this is unique"}, on_conflict: :replace_all, conflict_target: :title)
Specify
read_after_writes: true
in your schema for choosing fields that are read from the database after every operation. Or passreturning: true
toinsert
to read all fields back. (Note that it will only read from the database if at least one field is updated).MyRepo.insert(%Post{title: "this is unique"}, returning: true, on_conflict: on_conflict, conflict_target: :title)
Alternatively, read the data again from the database in a separate query. This option requires the primary key to be generated by the database:
{:ok, updated} = MyRepo.insert(%Post{title: "this is unique"}, on_conflict: on_conflict) Repo.get(Post, updated.id)
Because of the inability to know if the struct is up to date or not,
inserting a struct with associations and using the :on_conflict
option
at the same time is not recommended, as Ecto will be unable to actually
track the proper status of the association.
@callback insert!( struct_or_changeset :: Ecto.Schema.t() | Ecto.Changeset.t(), opts :: Keyword.t() ) :: Ecto.Schema.t()
Same as insert/2
but returns the struct or raises if the changeset is invalid.
@callback insert_all( schema_or_source :: binary() | {binary(), module()} | module(), entries_or_query :: [%{required(atom()) => value} | Keyword.t(value)] | Ecto.Query.t(), opts :: Keyword.t() ) :: {non_neg_integer(), nil | [term()]} when value: term() | Ecto.Query.t()
Inserts all entries into the repository.
It expects a schema module (MyApp.User
) or a source ("users"
) or
both ({"users", MyApp.User}
) as the first argument. The second
argument is a list of entries to be inserted, either as keyword
lists or as maps. The keys of the entries are the field names as
atoms and the value should be the respective value for the field
type or, optionally, an Ecto.Query
that returns a single entry
with a single value.
It returns a tuple containing the number of entries
and any returned result as second element. If the database
does not support RETURNING in INSERT statements or no
return result was selected, the second element will be nil
.
When a schema module is given, the entries given will be properly dumped
before being sent to the database. If the schema primary key has type
:id
or :binary_id
, it will be handled either at the adapter
or the storage layer. However any other primary key type or autogenerated
value, like Ecto.UUID
and timestamps, won't be autogenerated when
using insert_all/3
. You must set those fields explicitly. This is by
design as this function aims to be a more direct way to insert data into
the database without the conveniences of insert/2
. This is also
consistent with update_all/3
that does not handle auto generated
values as well.
It is also not possible to use insert_all
to insert across multiple
tables, therefore associations are not supported.
If a source is given, without a schema module, the given fields are passed as is to the adapter.
options
Options
:returning
- selects which fields to return. Whentrue
, returns all fields in the given schema. May be a list of fields, where a struct is still returned but only with the given fields. Orfalse
, where nothing is returned (the default). This option is not supported by all databases.:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set in the schema.:on_conflict
- It may be one of:raise
(the default),:nothing
,:replace_all
,{:replace_all_except, fields}
,{:replace, fields}
, a keyword list of update instructions or anEcto.Query
query for updates. See the "Upserts" section for more information.:conflict_target
- A list of column names to verify for conflicts. It is expected those columns to have unique indexes on them that may conflict. If none is specified, the conflict target is left up to the database. It may also be{:unsafe_fragment, binary_fragment}
to pass any expression to the database without any sanitization, this is useful for partial index or index with expressions, such as{:unsafe_fragment, "(coalesce(firstname, ""), coalesce(lastname, "")) WHERE middlename IS NULL"}
forON CONFLICT (coalesce(firstname, ""), coalesce(lastname, "")) WHERE middlename IS NULL
SQL query.:placeholders
- A map with placeholders. This feature is not supported by all databases. See the "Placeholders" section for more information.
See the "Shared options" section at the module documentation for remaining options.
source-query
Source query
A query can be given instead of a list with entries. This query needs to select into a map containing only keys that are available as writeable columns in the schema.
examples
Examples
MyRepo.insert_all(Post, [[title: "My first post"], [title: "My second post"]])
MyRepo.insert_all(Post, [%{title: "My first post"}, %{title: "My second post"}])
query = from p in Post,
join: c in assoc(p, :comments),
select: %{
author_id: p.author_id,
posts: count(p.id, :distinct),
interactions: sum(p.likes) + count(c.id)
},
group_by: p.author_id
MyRepo.insert_all(AuthorStats, query)
upserts
Upserts
insert_all/3
provides upserts (update or inserts) via the :on_conflict
option. The :on_conflict
option supports the following values:
:raise
- raises if there is a conflicting primary key or unique index:nothing
- ignores the error in case of conflicts:replace_all
- replace all values on the existing row with the values in the schema/changeset, including fields not explicitly set in the changeset, such as IDs and autogenerated timestamps (inserted_at
andupdated_at
). Do not use this option if you have auto-incrementing primary keys, as they will also be replaced. You most likely want to use{:replace_all_except, [:id]}
or{:replace, fields}
explicitly instead. This option requires a schema{:replace_all_except, fields}
- same as above except the given fields are not replaced. This option requires a schema{:replace, fields}
- replace only specific columns. This option requires:conflict_target
a keyword list of update instructions - such as the one given to
update_all/3
, for example:[set: [title: "new title"]]
an
Ecto.Query
that will act as anUPDATE
statement, such as the one given toupdate_all/3
Upserts map to "ON CONFLICT" on databases like Postgres and "ON DUPLICATE KEY" on databases such as MySQL.
return-values
Return values
By default, both Postgres and MySQL will return the number of entries
inserted on insert_all/3
. However, when the :on_conflict
option
is specified, Postgres and MySQL will return different results.
Postgres will only count a row if it was affected and will return 0 if no new entry was added.
MySQL will return, at a minimum, the number of entries attempted. For example,
if :on_conflict
is set to :nothing
, MySQL will return
the number of entries attempted to be inserted, even when no entry
was added.
Also note that if :on_conflict
is a query, MySQL will return
the number of attempted entries plus the number of entries modified
by the UPDATE query.
placeholders
Placeholders
Passing in a map for the :placeholders
allows you to send less
data over the wire when you have many entries with the same value
for a field. To use a placeholder, replace its value in each of your
entries with {:placeholder, key}
, where key
is the key you
are using in the :placeholders
option map. For example:
placeholders = %{blob: large_blob_of_text(...)}
entries = [
%{title: "v1", body: {:placeholder, :blob}},
%{title: "v2", body: {:placeholder, :blob}}
]
Repo.insert_all(Post, entries, placeholders: placeholders)
Keep in mind that:
placeholders cannot be nested in other values. For example, you cannot put a placeholder inside an array. Instead, the whole array has to be the placeholder
a placeholder key can only be used with columns of the same type
placeholders require a database that supports index parameters, so they are not currently compatible with MySQL
@callback insert_or_update(changeset :: Ecto.Changeset.t(), opts :: Keyword.t()) :: {:ok, Ecto.Schema.t()} | {:error, Ecto.Changeset.t()}
Inserts or updates a changeset depending on whether the struct is persisted or not.
The distinction whether to insert or update will be made on the
Ecto.Schema.Metadata
field :state
. The :state
is automatically set by
Ecto when loading or building a schema.
Please note that for this to work, you will have to load existing structs from the database. So even if the struct exists, this won't work:
struct = %Post{id: "existing_id", ...}
MyRepo.insert_or_update changeset
# => {:error, changeset} # id already exists
options
Options
:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set any schemas. Also, the@schema_prefix
for the parent record will override all default@schema_prefix
s set in any child schemas for associations.:stale_error_field
- The field where stale errors will be added in the returning changeset. This option can be used to avoid raisingEcto.StaleEntryError
. Only applies to updates.:stale_error_message
- The message to add to the configured:stale_error_field
when stale errors happen, defaults to "is stale". Only applies to updates.
See the "Shared options" section at the module documentation for more options.
example
Example
result =
case MyRepo.get(Post, id) do
nil -> %Post{id: id} # Post not found, we build one
post -> post # Post exists, let's use it
end
|> Post.changeset(changes)
|> MyRepo.insert_or_update
case result do
{:ok, struct} -> # Inserted or updated with success
{:error, changeset} -> # Something went wrong
end
@callback insert_or_update!(changeset :: Ecto.Changeset.t(), opts :: Keyword.t()) :: Ecto.Schema.t()
Same as insert_or_update/2
but returns the struct or raises if the changeset
is invalid.
@callback load( schema_or_map :: module() | map(), data :: map() | Keyword.t() | {list(), list()} ) :: Ecto.Schema.t() | map()
Loads data
into a schema or a map.
The first argument can be a a schema module or a map (of types). The first argument determines the return value: a struct or a map, respectively.
The second argument data
specifies fields and values that are to be loaded.
It can be a map, a keyword list, or a {fields, values}
tuple.
Fields can be atoms or strings.
Fields that are not present in the schema (or types
map) are ignored.
If any of the values has invalid type, an error is raised.
To load data from non-database sources, use Ecto.embedded_load/3
.
examples
Examples
iex> MyRepo.load(User, %{name: "Alice", age: 25})
%User{name: "Alice", age: 25}
iex> MyRepo.load(User, [name: "Alice", age: 25])
%User{name: "Alice", age: 25}
data
can also take form of {fields, values}
:
iex> MyRepo.load(User, {[:name, :age], ["Alice", 25]})
%User{name: "Alice", age: 25, ...}
The first argument can also be a types
map:
iex> types = %{name: :string, age: :integer}
iex> MyRepo.load(types, %{name: "Alice", age: 25})
%{name: "Alice", age: 25}
This function is especially useful when parsing raw query results:
iex> result = Ecto.Adapters.SQL.query!(MyRepo, "SELECT * FROM users", [])
iex> Enum.map(result.rows, &MyRepo.load(User, {result.columns, &1}))
[%User{...}, ...]
@callback preload(structs_or_struct_or_nil, preloads :: term(), opts :: Keyword.t()) :: structs_or_struct_or_nil when structs_or_struct_or_nil: [Ecto.Schema.t()] | Ecto.Schema.t() | nil
Preloads all associations on the given struct or structs.
This is similar to Ecto.Query.preload/3
except it allows
you to preload structs after they have been fetched from the
database.
In case the association was already loaded, preload won't attempt to reload it.
If you want to reset the loaded fields, see Ecto.reset_fields/2
.
options
Options
:force
- By default, Ecto won't preload associations that are already loaded. By setting this option to true, any existing association will be discarded and reloaded.:in_parallel
- If the preloads must be done in parallel. It can only be performed when we have more than one preload and the repository is not in a transaction. Defaults totrue
.:prefix
- the prefix to fetch preloads from. By default, queries will use the same prefix as the first struct in the given collection. This option allows the prefix to be changed.
See the "Shared options" section at the module documentation for more options.
examples
Examples
# Use a single atom to preload an association
posts = Repo.preload posts, :comments
# Use a list of atoms to preload multiple associations
posts = Repo.preload posts, [:comments, :authors]
# Use a keyword list to preload nested associations as well
posts = Repo.preload posts, [comments: [:replies, :likes], authors: []]
# You can mix atoms and keywords, but the atoms must come first
posts = Repo.preload posts, [:authors, comments: [:likes, replies: [:reactions]]]
# Use a keyword list to customize how associations are queried
posts = Repo.preload posts, [comments: from(c in Comment, order_by: c.published_at)]
# Use a two-element tuple for a custom query and nested association definition
query = from c in Comment, order_by: c.published_at
posts = Repo.preload posts, [comments: {query, [:replies, :likes]}]
The query given to preload may also preload its own associations.
@callback reload( struct_or_structs :: Ecto.Schema.t() | [Ecto.Schema.t()], opts :: Keyword.t() ) :: Ecto.Schema.t() | [Ecto.Schema.t() | nil] | nil
Reloads a given schema or schema list from the database.
When using with lists, it is expected that all of the structs in the list belong
to the same schema. Ordering is guaranteed to be kept. Results not found in
the database will be returned as nil
.
example
Example
MyRepo.reload(post)
%Post{}
MyRepo.reload([post1, post2])
[%Post{}, %Post{}]
MyRepo.reload([deleted_post, post1])
[nil, %Post{}]
@callback reload!(struct_or_structs, opts :: Keyword.t()) :: struct_or_structs when struct_or_structs: Ecto.Schema.t() | [Ecto.Schema.t()]
Similar to reload/2
, but raises when something is not found.
When using with lists, ordering is guaranteed to be kept.
example
Example
MyRepo.reload!(post)
%Post{}
MyRepo.reload!([post1, post2])
[%Post{}, %Post{}]
@callback update(changeset :: Ecto.Changeset.t(), opts :: Keyword.t()) :: {:ok, Ecto.Schema.t()} | {:error, Ecto.Changeset.t()}
Updates a changeset using its primary key.
A changeset is required as it is the only mechanism for
tracking dirty changes. Only the fields present in the changes
part
of the changeset are sent to the database. Any other, in-memory
changes done to the schema are ignored. If more than one database
operation is required, they're automatically wrapped in a transaction.
If the struct has no primary key, Ecto.NoPrimaryKeyFieldError
will be raised.
If the struct cannot be found, Ecto.StaleEntryError
will be raised.
It returns {:ok, struct}
if the struct has been successfully
updated or {:error, changeset}
if there was a validation
or a known constraint error.
options
Options
:returning
- selects which fields to return. It accepts a list of fields to be returned from the database. Whentrue
, returns all fields. Whenfalse
, no extra fields are returned. It will always include all fields inread_after_writes
. Not all databases support this option.:force
- By default, if there are no changes in the changeset,update/2
is a no-op. By setting this option to true, update callbacks will always be executed, even if there are no changes (including timestamps).:prefix
- The prefix to run the query on (such as the schema path in Postgres or the database in MySQL). This overrides the prefix set in the query and any@schema_prefix
set any schemas. Also, the@schema_prefix
for the parent record will override all default@schema_prefix
s set in any child schemas for associations.:stale_error_field
- The field where stale errors will be added in the returning changeset. This option can be used to avoid raisingEcto.StaleEntryError
.:stale_error_message
- The message to add to the configured:stale_error_field
when stale errors happen, defaults to "is stale".
See the "Shared options" section at the module documentation for more options.
example
Example
post = MyRepo.get!(Post, 42)
post = Ecto.Changeset.change post, title: "New title"
case MyRepo.update post do
{:ok, struct} -> # Updated with success
{:error, changeset} -> # Something went wrong
end
@callback update!(changeset :: Ecto.Changeset.t(), opts :: Keyword.t()) :: Ecto.Schema.t()
Same as update/2
but returns the struct or raises if the changeset is invalid.
Link to this section Transaction API
@callback checked_out?() :: boolean()
Returns true if a connection has been checked out.
This is true if inside a Ecto.Repo.checkout/2
or
Ecto.Repo.transaction/2
.
examples
Examples
MyRepo.checked_out?
#=> false
MyRepo.transaction(fn ->
MyRepo.checked_out? #=> true
end)
MyRepo.checkout(fn ->
MyRepo.checked_out? #=> true
end)
@callback checkout((-> result), opts :: Keyword.t()) :: result when result: var
Checks out a connection for the duration of the function.
It returns the result of the function. This is useful when you need to perform multiple operations against the repository in a row and you want to avoid checking out the connection multiple times.
checkout/2
and transaction/2
can be combined and nested
multiple times. If checkout/2
is called inside the function
of another checkout/2
call, the function is simply executed,
without checking out a new connection.
options
Options
See the "Shared options" section at the module documentation for more options.
@callback in_transaction?() :: boolean()
Returns true if the current process is inside a transaction.
If you are using the Ecto.Adapters.SQL.Sandbox
in tests, note that even
though each test is inside a transaction, in_transaction?/0
will only
return true inside transactions explicitly created with transaction/2
. This
is done so the test environment mimics dev and prod.
examples
Examples
MyRepo.in_transaction?
#=> false
MyRepo.transaction(fn ->
MyRepo.in_transaction? #=> true
end)
Rolls back the current transaction.
The transaction will return the value given as {:error, value}
.
Note that calling rollback
causes the code in the transaction to stop executing.
@callback transaction( fun_or_multi :: (... -> any()) | Ecto.Multi.t(), opts :: Keyword.t() ) :: {:ok, any()} | {:error, any()} | {:error, Ecto.Multi.name(), any(), %{required(Ecto.Multi.name()) => any()}}
Runs the given function or Ecto.Multi
inside a transaction.
use-with-function
Use with function
transaction/2
can be called with both a function of arity
zero or one. The arity zero function will just be executed as is:
import Ecto.Changeset, only: [change: 2]
MyRepo.transaction(fn ->
MyRepo.update!(change(alice, balance: alice.balance - 10))
MyRepo.update!(change(bob, balance: bob.balance + 10))
end)
While the arity one function will receive the repo of the transaction as its first argument:
MyRepo.transaction(fn repo ->
repo.insert!(%Post{})
end)
If an Elixir exception occurs the transaction will be rolled back
and the exception will bubble up from the transaction function.
If no exception occurs, the transaction is committed when the
function returns. A transaction can be explicitly rolled back
by calling rollback/1
, this will immediately leave the function
and return the value given to rollback
as {:error, value}
.
A successful transaction returns the value returned by the function
wrapped in a tuple as {:ok, value}
.
nested-transactions
Nested transactions
If transaction/2
is called inside another transaction, the function
is simply executed, without wrapping the new transaction call in any
way. If there is an error in the inner transaction and the error is
rescued, or the inner transaction is rolled back, the whole outer
transaction is aborted, guaranteeing nothing will be committed.
Below is an example of how rollbacks work with nested transactions:
{:error, :rollback} =
MyRepo.transaction(fn ->
{:error, :posting_not_allowed} =
MyRepo.transaction(fn ->
# This function call causes the following to happen:
#
# * the transaction is rolled back in the database,
# * code execution is stopped within the current function,
# * and the value, passed to `rollback/1` is returned from
# `MyRepo.transaction/1` as the second element in the error
# tuple.
#
MyRepo.rollback(:posting_not_allowed)
# `rollback/1` stops execution, so code here won't be run
end)
# The transaction here is now aborted and any further
# operation will raise an exception.
end)
See the "Aborted transactions" section for more examples of aborted transactions and how to handle them.
In practice, managing nested transactions can become complex quickly.
For this reason, Ecto provides Ecto.Multi
for composing transactions.
use-with-ecto-multi
Use with Ecto.Multi
transaction/2
also accepts the Ecto.Multi
struct as first argument.
Ecto.Multi
allows you to compose transactions operations, step by step,
and manage what happens in case of success or failure.
When an Ecto.Multi
is given to this function, a transaction will be started,
all operations applied and in case of success committed returning {:ok, changes}
:
# With Ecto.Multi
Ecto.Multi.new()
|> Ecto.Multi.insert(:post, %Post{})
|> MyRepo.transaction
In case of any errors the transaction will be rolled back and
{:error, failed_operation, failed_value, changes_so_far}
will be returned.
Explore the Ecto.Multi
documentation to learn more and find detailed examples.
aborted-transactions
Aborted transactions
When an operation inside a transaction fails, the transaction is aborted in the database. For instance, if you attempt an insert that violates a unique constraint, the insert fails and the transaction is aborted. In such cases, any further operation inside the transaction will raise exceptions.
Take the following transaction as an example:
Repo.transaction(fn repo ->
case repo.insert(changeset) do
{:ok, post} ->
repo.insert(%Status{value: "success"})
{:error, changeset} ->
repo.insert(%Status{value: "failure"})
end
end)
If the changeset is valid, but the insert operation fails due to a database constraint,
the subsequent repo.insert(%Failure{})
operation will raise an exception because the
database has already aborted the transaction and thus making the operation invalid.
In Postgres, the exception would look like this:
** (Postgrex.Error) ERROR 25P02 (in_failed_sql_transaction) current transaction is aborted, commands ignored until end of transaction block
If the changeset is invalid before it reaches the database due to a validation error,
no statement is sent to the database, an :error
tuple is returned, and repo.insert(%Failure{})
operation will execute as usual.
We have two options to deal with such scenarios:
If don't want to change the semantics of your code, you can also use the savepoints
feature by passing the :mode
option like this: repo.insert(changeset, mode: :savepoint)
.
In case of an exception, the transaction will rollback to the savepoint and prevent
the transaction from failing.
Another alternative is to handle this operation outside of the transaction.
For example, you can choose to perform an explicit repo.rollback
call in the
{:error, changeset}
clause and then perform the repo.insert(%Failure{})
outside
of the transaction. You might also consider using Ecto.Multi
, as they automatically
rollback whenever an operation fails.
working-with-processes
Working with processes
The transaction is per process. A separate process started inside a transaction won't be part of the same transaction and will use a separate connection altogether.
When using the Ecto.Adapters.SQL.Sandbox
in tests, while it may be
possible to share the connection between processes, the parent process
will typically hold the connection until the transaction completes. This
may lead to a deadlock if the child process attempts to use the same connection.
See the docs for
Ecto.Adapters.SQL.Sandbox
for more information.
options
Options
See the "Shared options" section at the module documentation for more options.
Link to this section Runtime API
@callback __adapter__() :: Ecto.Adapter.t()
Returns the adapter tied to the repository.
@callback config() :: Keyword.t()
Returns the adapter configuration stored in the :otp_app
environment.
If the init/2
callback is implemented in the repository,
it will be invoked with the first argument set to :runtime
.
Returns the atom name or pid of the current repository.
See put_dynamic_repo/1
for more information.
Sets the dynamic repository to be used in further interactions.
Sometimes you may want a single Ecto repository to talk to
many different database instances. By default, when you call
MyApp.Repo.start_link/1
, it will start a repository with
name MyApp.Repo
. But if you want to start multiple repositories,
you can give each of them a different name:
MyApp.Repo.start_link(name: :tenant_foo, hostname: "foo.example.com")
MyApp.Repo.start_link(name: :tenant_bar, hostname: "bar.example.com")
You can also start repositories without names by explicitly setting the name to nil:
MyApp.Repo.start_link(name: nil, hostname: "temp.example.com")
However, once the repository is started, you can't directly interact with
it, since all operations in MyApp.Repo
are sent by default to the repository
named MyApp.Repo
. You can change the default repo at compile time with:
use Ecto.Repo, default_dynamic_repo: :name_of_repo
Or you can change it anytime at runtime by calling put_dynamic_repo/1
:
MyApp.Repo.put_dynamic_repo(:tenant_foo)
From this moment on, all future queries done by the current process will
run on :tenant_foo
.
@callback start_link(opts :: Keyword.t()) :: {:ok, pid()} | {:error, {:already_started, pid()}} | {:error, term()}
Starts any connection pooling or supervision and return {:ok, pid}
or just :ok
if nothing needs to be done.
Returns {:error, {:already_started, pid}}
if the repo is already
started or {:error, term}
in case anything else goes wrong.
options
Options
See the configuration in the moduledoc for options shared between adapters, for adapter-specific configuration see the adapter's documentation.
@callback stop(timeout()) :: :ok
Shuts down the repository.
Link to this section User callbacks
@callback default_options(operation) :: Keyword.t() when operation: :all | :insert_all | :update_all | :delete_all | :stream | :transaction | :insert | :update | :delete | :insert_or_update
A user customizable callback invoked to retrieve default options for operations.
This can be used to provide default values per operation that
have higher precedence than the values given on configuration
or when starting the repository. It can also be used to set
query specific options, such as :prefix
.
This callback is invoked as the entry point for all repository operations. For example, if you are executing a query with preloads, this callback will be invoked once at the beginning, but the options returned here will be passed to all following operations.
@callback init(context :: :supervisor | :runtime, config :: Keyword.t()) :: {:ok, Keyword.t()} | :ignore
A callback executed when the repo starts or when configuration is read.
The first argument is the context the callback is being invoked. If it
is called because the Repo supervisor is starting, it will be :supervisor
.
It will be :runtime
if it is called for reading configuration without
actually starting a process.
The second argument is the repository configuration as stored in the
application environment. It must return {:ok, keyword}
with the updated
list of configuration or :ignore
(only in the :supervisor
case).
@callback prepare_query(operation, query :: Ecto.Query.t(), opts :: Keyword.t()) :: {Ecto.Query.t(), Keyword.t()} when operation: :all | :update_all | :delete_all | :stream | :insert_all
A user customizable callback invoked for query-based operations.
This callback can be used to further modify the query and options before it is transformed and sent to the database.
This callback is invoked for all query APIs, including the stream
functions. It is also invoked for insert_all
if a source query is
given. It is not invoked for any of the other schema functions.
examples
Examples
Let's say you want to filter out records that were "soft-deleted"
(have deleted_at
column set) from all operations unless an admin
is running the query; you can define the callback like this:
@impl true
def prepare_query(_operation, query, opts) do
if opts[:admin] do
{query, opts}
else
query = from(x in query, where: is_nil(x.deleted_at))
{query, opts}
end
end
And then execute the query:
Repo.all(query) # only non-deleted records are returned
Repo.all(query, admin: true) # all records are returned
The callback will be invoked for all queries, including queries made from associations and preloads. It is not invoked for each individual join inside a query.
Link to this section Functions
Returns all running Ecto repositories.
The list is returned in no particular order. The list contains either atoms, for named Ecto repositories, or PIDs.