View Source Subscriptions

There are two types of subscriptions provided by EventStore:

Transient subscriptions where new events are broadcast to subscribers immediately after they have been appended to storage.
Persistent subscriptions which guarantee at-least-once delivery of every persisted event, provide back-pressure, and can be started, paused, and resumed from any position, including from the stream's origin.

event-pub-sub
Event pub/sub

PostgreSQL's LISTEN and NOTIFY commands are used to pub/sub event notifications from the database. An after update trigger on the streams table is used to execute NOTIFY for each batch of inserted events. The notification payload contains the stream uuid, stream id, and first / last stream versions (e.g. stream-12345,1,1,5).

A single process will connect to the database to listen for these notifications. It fetches the event data and broadcasts to all interested subscriptions. This approach supports running an EventStore on multiple nodes, regardless of whether they are connected together to form a cluster using distributed Erlang. One connection per node is used for single node and multi-node deployments.

transient-subscriptions
Transient subscriptions

Use EventStore.subscribe/2 to create a transient subscription to a single stream identified by its stream_uuid. Events will be received in batches as an {:events, events} message, where events is a collection of EventStore.RecordedEvent structs.

You can use $all as the stream identity to subscribe to events appended to all streams. With transient subscriptions you do not need to acknowledge receipt of the published events. The subscription will terminate when the subscriber process stops running.

Subscribe to single stream events

Subscribe to events appended to a single stream:

alias MyApp.EventStore

:ok = EventStore.subscribe(stream_uuid)

# receive first batch of events
receive do
  {:events, events} ->
    IO.puts("Received events: " <> inspect(events))
end

Filtering events

You can provide an event selector function that filters each RecordedEvent before sending it to the subscriber:

alias EventStore.RecordedEvent
alias MyApp.EventStore

EventStore.subscribe(stream_uuid, selector: fn
  %RecordedEvent{data: data} -> data != nil
end)

# receive first batch of mapped event data
receive do
  {:events, %RecordedEvent{} = event_data} ->
    IO.puts("Received non nil event data: " <> inspect(event_data))
end

Mapping events

You can provide an event mapping function that maps each RecordedEvent before sending it to the subscriber:

alias EventStore.RecordedEvent
alias MyApp.EventStore

EventStore.subscribe(stream_uuid, mapper: fn
  %RecordedEvent{data: data} -> data
end)

# receive first batch of mapped event data
receive do
  {:events, event_data} ->
    IO.puts("Received event data: " <> inspect(event_data))
end

persistent-subscriptions
Persistent subscriptions

Persistent subscriptions to a stream will guarantee at least once delivery of every persisted event. Each subscription may be independently paused, then later resumed from where it stopped. The last received and acknowledged event is stored by the EventStore to support resuming at a later time or whenever the subscriber process restarts.

A subscription can be created to receive events appended to a single or all streams.

Subscriptions must be uniquely named. By default a subscription only supports a single subscriber. Attempting to connect two subscribers to the same subscription will return {:error, :subscription_already_exists}. You can optionally create a competing consumer subscription with multiple subscribers.

subscribed-message
`:subscribed` message

Once the subscription has successfully subscribed to the stream it will send the subscriber a {:subscribed, subscription} message. This indicates the subscription succeeded and you will begin receiving events.

Only one instance of a named subscription to a stream can connect to the database. This guarantees that starting the same subscription on each node when run on a cluster, or when running multiple single instance nodes, will only allow one subscription to actually connect. Therefore you can defer any initialisation until receipt of the {:subscribed, subscription} message to prevent duplicate effort by multiple nodes racing to create or subscribe to the same subscription.

events-message
`:events` message

For each batch of events appended to the event store your subscriber will receive a {:events, events} message. The events list is a collection of EventStore.RecordedEvent structs.

subscription-start-from
Subscription start from

By default subscriptions are created from the stream origin; they will receive all events from the stream. You can optionally specify a given start position:

:origin - subscribe to events from the start of the stream (identical to using 0). This is the default behaviour.
:current - subscribe to events from the current version.
event_number (integer) - specify an exact event number to subscribe from. This will be the same as the stream version for single stream subscriptions.

acknowledge-received-events
Acknowledge received events

Receipt of each event by the subscriber must be acknowledged. This allows the subscription to resume on failure without missing an event and to indicate the subscription is ready to receive the next event.

The subscriber receives an {:events, events} tuple containing the published events. A subscription is returned when subscribing to the stream. This should be used to send the acknowledgement to using the EventStore.ack/2 function:

 alias MyApp.EventStore

 :ok = EventStore.ack(subscription, events)

A subscriber can confirm receipt of each event in a batch by sending multiple acks, one per event. The subscriber may confirm receipt of the last event in the batch in a single ack.

A subscriber will not receive further published events until it has confirmed receipt of all received events. This provides back pressure to the subscription to prevent the subscriber from being overwhelmed with messages if it cannot keep up. The subscription will buffer events until the subscriber is ready to receive, or an overflow occurs. At which point it will move into a catch-up mode and query events and replay them from storage until caught up.

Subscribe to all events

Subscribe to events appended to all streams:

alias MyApp.EventStore

{:ok, subscription} = EventStore.subscribe_to_all_streams("example_all_subscription", self())

# Wait for the subscription confirmation
receive do
  {:subscribed, ^subscription} ->
    IO.puts("Successfully subscribed to all streams")
end

receive do
  {:events, events} ->
    IO.puts "Received events: #{inspect events}"

    # Acknowledge receipt
    :ok = EventStore.ack(subscription, events)
end

Unsubscribe from all streams:

alias MyApp.EventStore

:ok = EventStore.unsubscribe_from_all_streams("example_all_subscription")

Subscribe to single stream events

Subscribe to events appended to a single stream:

alias MyApp.EventStore

stream_uuid = EventStore.UUID.uuid4()
{:ok, subscription} = EventStore.subscribe_to_stream(stream_uuid, "example_single_subscription", self())

# Wait for the subscription confirmation
receive do
  {:subscribed, ^subscription} ->
    IO.puts("Successfully subscribed to single stream")
end

receive do
  {:events, events} ->
    # Process events & acknowledge receipt
    :ok = EventStore.ack(subscription, events)
end

Unsubscribe from a single stream:

alias MyApp.EventStore

:ok = EventStore.unsubscribe_from_stream(stream_uuid, "example_single_subscription")

Start subscription from a given position

You can choose to receive events from a given starting position.

The supported options are:

:origin - Start receiving events from the beginning of the stream or all streams (default).
:current - Subscribe to newly appended events only, skipping already persisted events.
event_number (integer) - Specify an exact event number to subscribe from. This will be the same as the stream version for single stream subscriptions.

Example all stream subscription that will receive new events appended after the subscription has been created:

alias MyApp.EventStore

{:ok, subscription} = EventStore.subscribe_to_all_streams("example_subscription", self(), start_from: :current)

Event Filtering

You can provide an event selector function that run in the subscription process, before sending the event to your mapper and subscriber. You can use this to filter events before dispatching to a subscriber.

Subscribe to all streams and provide a selector function that only sends data that the selector function returns true for.

alias EventStore.RecordedEvent
alias MyApp.EventStore

selector = fn %RecordedEvent{event_number: event_number} ->
  rem(event_number) == 0
end

{:ok, subscription} = EventStore.subscribe_to_all_streams("example_subscription", self(), selector: selector)

# wait for the subscription confirmation
receive do
  {:subscribed, ^subscription} ->
    IO.puts("Successfully subscribed to all streams")
end

receive do
  {:events, filtered_events} ->
    # ... process events & ack receipt using last `event_number`
    RecordedEvent{event_number: event_number} = List.last(filtered_events)

    :ok = EventStore.ack(subscription, event_number)
end

Mapping events

You can provide an event mapping function that runs in the subscription process, before sending the event to your subscriber. You can use this to change the data received.

Subscribe to all streams and provide a mapper function that sends only the event data:

alias EventStore.RecordedEvent
alias MyApp.EventStore

mapper = fn %RecordedEvent{event_number: event_number, data: data} ->
  {event_number, data}
end

{:ok, subscription} = EventStore.subscribe_to_all_streams("example_subscription", self(), mapper: mapper)

# wait for the subscription confirmation
receive do
  {:subscribed, ^subscription} ->
    IO.puts("Successfully subscribed to all streams")
end

receive do
  {:events, mapped_events} ->
    # ... process events & ack receipt using last `event_number`
    {event_number, _data} = List.last(mapped_events)

    :ok = EventStore.ack(subscription, event_number)
end

subscription-concurrency
Subscription concurrency

A single persistent subscription can support multiple subscribers. Events will be distributed to subscribers evenly using a round-robin algorithm. The competing consumers pattern enables multiple subscribers to process events concurrently to optimise throughput, to improve scalability and availability, and to balance the workload.

By default a subscription will only allow a single subscriber but you can opt-in to concurrent subscriptions be providing a non-negative concurrency_limit as a subscription option.

Subscription concurrency configuration options

concurrency_limit defines the maximum number of concurrent subscribers allowed to connect to the subscription. By default only one subscriber may connect. If too many subscribers attempt to connect to the subscription an {:error, :too_many_subscribers} is returned.
buffer_size limits how many in-flight events will be sent to the subscriber process before acknowledgement of successful processing. This limits the number of messages sent to the subscriber and stops their message queue from getting filled with events. Defaults to one in-flight event.
partition_by is an optional function used to partition events to subscribers. It can be used to guarantee processing order when multiple subscribers have subscribed to a single subscription as described in Ordering guarantee below. The function is passed a single argument (an EventStore.RecordedEvent struct) and must return the partition key. As an example to guarantee events for a single stream are processed serially, but different streams are processed concurrently, you could use the stream_uuid as the partition key.

ordering-guarantee
Ordering guarantee

With multiple subscriber processes connected to a single subscription the ordering of event processing is no longer guaranteed since events may be processed in differing amounts of time. This can cause problems if your event handling code expects events to be processed in the order they were originally appended to a steam.

You can use a partition_by function to guarantee ordering of events within a particular group (e.g. per stream) but still allow events for different groups to be processed concurrently.

Partitioning gives you the benefits of competing consumers but still allows event ordering by partition where required.

Partition by example

alias EventStore.RecordedEvent
alias MyApp.EventStore

by_stream = fn %RecordedEvent{stream_uuid: stream_uuid} -> stream_uuid end

{:ok, _subscription} =
  EventStore.subscribe_to_stream(stream_uuid, "example", self(),
    concurrency_limit: 10,
    partition_by: by_stream
  )

The above subscription would ensure that events for each stream are processed serially (by a single subscriber) in the order they were appended to the stream, but events for any other stream can be processed concurrently by another subscriber.

example-persistent-subscriber
Example persistent subscriber

Use a GenServer process to subscribe to the event store and track all notified events:

# An example subscriber
defmodule Subscriber do
  use GenServer

  alias MyApp.EventStore

  def start_link do
    GenServer.start_link(__MODULE__, [])
  end

  def received_events(subscriber) do
    GenServer.call(subscriber, :received_events)
  end

  def init(events) do
    # Subscribe to events from all streams
    {:ok, subscription} = EventStore.subscribe_to_all_streams("example_subscription", self())

    {:ok, %{events: events, subscription: subscription}}
  end

  # Successfully subscribed to all streams
  def handle_info({:subscribed, subscription}, %{subscription: subscription} = state) do
    {:noreply, state}
  end

  # Event notification
  def handle_info({:events, events}, state) do
    %{events: existing_events, subscription: subscription} = state

    # Confirm receipt of received events
    :ok = EventStore.ack(subscription, events)

    {:noreply, %{state | events: existing_events ++ events}}
  end

  def handle_call(:received_events, _from, %{events: events} = state) do
    {:reply, events, state}
  end
end

Start your subscriber process, which subscribes to all streams in the event store:

{:ok, subscriber} = Subscriber.start_link()

deleting-a-persistent-subscription
Deleting a persistent subscription

You can delete a single stream or all stream subscription without requiring an active subscriber:

alias MyApp.EventStore

:ok = EventStore.delete_subscription(stream_uuid, subscription_name)
:ok = EventStore.delete_all_streams_subscription(subscription_name)

Deleting the subscription will remove the subscription checkpoint allowing you to later create a subscription with the same name, using any start point.

If there is an active subscriber when deleting the subscription it will be stopped.

← Previous Page Using the EventStore

Next Page → Event serialization

Settings View Source Subscriptions

event-pub-sub Event pub/sub

transient-subscriptions Transient subscriptions

Subscribe to single stream events

Filtering events

Mapping events

persistent-subscriptions Persistent subscriptions

subscribed-message :subscribed message

events-message :events message

subscription-start-from Subscription start from

acknowledge-received-events Acknowledge received events

Subscribe to all events

Subscribe to single stream events

Start subscription from a given position

Event Filtering

Mapping events

subscription-concurrency Subscription concurrency

Subscription concurrency configuration options

ordering-guarantee Ordering guarantee

Partition by example

example-persistent-subscriber Example persistent subscriber

deleting-a-persistent-subscription Deleting a persistent subscription

View Source Subscriptions

event-pub-sub
Event pub/sub

transient-subscriptions
Transient subscriptions

persistent-subscriptions
Persistent subscriptions

subscribed-message
`:subscribed` message

events-message
`:events` message

subscription-start-from
Subscription start from

acknowledge-received-events
Acknowledge received events

subscription-concurrency
Subscription concurrency

ordering-guarantee
Ordering guarantee

example-persistent-subscriber
Example persistent subscriber

deleting-a-persistent-subscription
Deleting a persistent subscription