View Source FSAPI Documentation

The FSAPI is a simple HTTP-API.

You send a HTTP GET request an in return you will get XML.

nodes
Nodes

Nodes are the hierarchical path to Object you want to receive or modify.

Example:

If you want to toggle mute or check if the device is muted you can access the node:

netRemote.sys.audio.mute

operations
Operations

Operations determine how you interact with the node.

SET

Sets the value of an node.

GET

Gets the value of an node.

LIST_GET_NEXT

Get the next "page" of a list stored in the node.

CREATE_SESSION

DELETE_SESSION

Logout and destroy the Session-ID.

GET_NOTIFIES

This is a special Command: The device does not close the HTTP-Request.

With this command you can use the connection like a normal socket, where the device sends you updates about changed nodes.

This Command is only available if a Session-ID is used to authenticate.

It gives you a FS_TIMEOUT error if nothing has changed.

Examples:

GET:
/fsapi/GET/netRemote.sys.audio.mute?pin=1337&sid=1932538906

SET
/fsapi/SET/netRemote.sys.audio.mute?pin=1337&sid=1932538906&value=1


LIST_GET_NEXT
/fsapi/LIST_GET_NEXT/netRemote.nav.presets/-1?pin=1337&maxItems=10

status-codes
Status Codes

The first indicator for the success of your request is the HTTP-Statuscode, it should be 200 if everything is ok.

HTTP 200 OK

You request is valid:

The path to the FSAPI is right and you provided the right PIN.

HTTP 404 Not Found

You get an 404 Status Code if your Session-ID is invalid or you requested a non-existing path.

HTTP 403 Forbidden

You get an 403 Statuscode if you send an invalid PIN.

return-values
Return Values

If your request is valid (HTTP Status 200 OK) the device returns allways an XML-set like this:

<fsapiResponse>
<status>STATUS</status>
VALUE
</fsapiResponse>

Where VALUE is the requested value and STATUS should be FS_OK if everything is fine with the request.

FS_OK

Everything went well: The command has been executed.

The new value is valid and within the range of the validation rules.

FS_FAIL

The command hasn't been executed, because your value does not match the validation rules.

FS_PACKET_BAD

You tried to set the value of an read only node.

FS_NODE_BLOCKED

You tried to SET a node of an operation Mode which is not active.

FS_NODE_DOES_NOT_EXIST

You tried to access an not existing node.

FS_TIMEOUT

Your Request took to long.

FS_LIST_END

There is no list-entry left.

session-handling
Session Handling

The device does only support one session at a time. If you create a new session the old session will be purged.

Session-ID

If you send only the Session-ID your new requests will fail, if a new session is created by another user.

The Session-ID is not only valid for the current command and can be reused for new commands.

If you send the pin in every request you can have multiple users, which can cause conflicts between their commands.

reference
Reference

To keep it simple I will only mention the VALUE field of the response.

Nav - menu-navigation
Play - settings for current playback
System - system settings
Platform - platform updates
Misc - debug and log settings
Test - iperf console
Spotify* - only for devices with spotify-support
Airplay* - only for devices with airplay-support
Multiroom* - only for devices with multiroom-support

All topics except the menu are sorted in alphabetical order.

airplay
Airplay

:exclamation: The following comands work only on devices with airplay-support :exclamation:

netRemote.airplay.clearPassword

Method: ??

Todo

netRemote.airplay.setPassword

Method: ??

Todo

multiroom
Multiroom

:exclamation: The following comands work only on devices with mutiroom-support :exclamation:

netRemote.multiroom.caps.maxClients

Method: ??

Todo

netRemote.multiroom.caps.protocolVersion

Method: ??

Todo

netRemote.multiroom.client.statusX

Method: ??

Todo

netRemote.multiroom.device.listAll

Method: LIST_GET_NEXT

Shows other Mutiroom devices in the Network

/fsapi/LIST_GET_NEXT/netRemote.multiroom.device.listAll/-1?pin=1337&maxItems=10

<item key="0">
<field name="udn"><c8_array>46C19E4A-472B-11E1-9F67-002261ED0770</c8_array></field>
<field name="friendlyname"><c8_array>DeviceName</c8_array></field>
<field name="ipaddress"><c8_array>192.168.xxx.xxx</c8_array></field>
<field name="audiosyncversion"><c8_array>3</c8_array></field>
<field name="groupid"><c8_array>0AD57A8A-49A8-11E6-XXXX-002261EDXXXX</c8_array></field>
<field name="groupname"><c8_array>MultirooGroupName</c8_array></field>
<field name="grouprole"><u8>2</u8></field>
<field name="clientnumber"><u8>254</u8></field>
</item>

<listend/>

netRemote.multiroom.device.listAllVersion

TODO

Method: ??

???

netRemote.multiroom.device.serverStatus

TODO

Method: GET

???

/fsapi/GET/netRemote.multiroom.device.serverStatus?pin=1337

<value><u8>1</u8></value>

netRemote.multiroom.group.removeClient

TODO

Method: SET

Send the udn of the client as value that you get with netRemote.multiroom.device.listAll

netRemote.multiroom.group.streamable

TODO

Method: GET

???

/fsapi/GET/netRemote.multiroom.group.streamable?pin=1337

<value><u8>1</u8></value>

netRemote.multiroom.group.create

Method: SET

Create new group

/fsapi/SET/netRemote.multiroom.group.create?pin=1337&value=GroupName

<status>FS_NODE_DOES_NOT_EXIST</status>

netRemote.multiroom.group.addClient

Method: SET

Add device to group

/fsapi/SET/netRemote.multiroom.group.addClient?pin=1337&value=[Device-udn]

<status>FS_NODE_DOES_NOT_EXIST</status>

netRemote.multiroom.group.attachedClients

TODO

Method: ??

???

netRemote.multiroom.group.destroy

Method: SET

Delete Multiroom group

/fsapi/SET/netRemote.multiroom.group.destroy?pin=1337&value=1

<status>FS_NODE_DOES_NOT_EXIST</status>

netRemote.multiroom.group.name

Method: GET

Get Mutiroom Group Name

/fsapi/GET/netRemote.multiroom.group.name?pin=1337

<value><c8_array>1234</c8_array></value>

netRemote.multiroom.group.id

TODO

Method: GET

???

/fsapi/GET/netRemote.multiroom.group.id?pin=1337

<value><c8_array>501867A4-42A7-11E6-XXXX-002261E7XXXX</c8_array></value>

netRemote.multiroom.group.state

Method: GET, SET

0 = No Group, (1 = Client), 2 = Server

/fsapi/GET/netRemote.multiroom.group.state?pin=1337

<value><u8>2</u8></value>

netRemote.multiroom.client.volumeX

Method: GET, SET

Set/Get Volume for device No X (0,1,2,...)

/fsapi/GET/netRemote.multiroom.client.volume0?pin=1337&value=12

<value><u8>20</u8></value>

netRemote.multiroom.client.muteX

Method: GET, SET

Set/Get MuteState for device No X (0,1,2,...)

/fsapi/GET/netRemote.multiroom.client.mute?pin=1337&value=1

<value><u8>0</u8></value>

netRemote.multiroom.group.masterVolume

Method: GET, SET

Set/Get Volume for all devices

/fsapi/GET/netRemote.multiroom.group.masterVolume?pin=1337&value=12

<value><u8>12</u8></value>

misc
Misc

netRemote.misc.fsDebug.component

TODO

Method: ??

???

netRemote.misc.fsDebug.traceLevel

TODO

Method: ??

???

nav
Nav

Every change of the system mode, will disable the nav state to reset the current menu-position. It has to be activated with nav.state

netRemote.nav.action.dabPrune

TODO

Method: ??

???

netRemote.nav.action.dabScan

TODO

Starts Scan for DAB Channels

Method: GET

Returns ???

/fsapi/GET/netRemote.nav.action.dabScan?pin=1337&sid=1983995656

<value><u8>0</u8></value>

netRemote.nav.action.navigate

Selects the current menu entry (see netRemote.nav.list)

For returning to the upper menu level just set it to -1.

This function works only with folders (type=0), see netRemote.nav.list.

Method: SET

/fsapi/SET/netRemote.nav.action.navigate?pin=1337&value=0

netRemote.nav.action.selectItem

Selects an Menu Item (see netRemove.nav.list)

This function works only on files (type > 0), see netRemote.nav.list.

Method: SET

fsapi/SET/netRemote.nav.action.selectItem?pin=1337&value=7

netRemote.nav.action.selectPreset

Selects a favorite Radio Stations (see netRemote.nav.presets)

Method: GET/SET

/fsapi/SET/netRemote.nav.action.selectPreset?pin=1337&value=0

netRemote.nav.caps

TODO

Method: GET

Sets / Returns ???

/fsapi/GET/netRemote.nav.caps?pin=1337&sid=779967663

<value><u32>3</u32></value>

netRemote.nav.browseMode

TODO

Method: ??

???

netRemote.nav.dabScanUpdate

TODO

Method: ??

???

netRemote.nav.errorStr

TODO

Method: ??

???

netRemote.nav.list

Get the menu for the current mode

To prevent overhead you could get the number of items by netRemote.nav.numItems

The -1 Parameter is the Start-Value, you could provide 4 to get all items with an index greater 4.

The following field types are known:

folder
mp3
mp4

Method: LIST_GET_NEXT

fsapi/LIST_GET_NEXT/netRemote.nav.list/-1?pin=1337&maxItems=10

        <itemkey="0">
            <fieldname="name">
                <c8_array>Meine Favoriten</c8_array>
                </field>
            <fieldname="type">
                <u8>0</u8>
                </field>
            <field name="subtype">
                <u8>0</u8>
                </field>
        </item>
       <item key="1">
            <field name="name">
                <c8_array>Lokal Deutschland</c8_array>
                </field>
            <field name="type">
                <u8>0</u8>
            </field>
            <fieldname="subtype">
                <u8>0</u8>
            </field>
        </item>

netRemote.nav.numItems

Method: GET

Get the amount of entries for the current navigation-set.

/fsapi/GET/netRemote.nav.numItems?pin=1337&sid=973104948


<value><s32>21</s32></value>

netRemote.nav.presets

Method: LIST_GET_NEXT

Lists all favorite Radio Stations for the current mode

/fsapi/LIST_GET_NEXT/netRemote.nav.presets/-1?pin=1337&maxItems=10

        <item key="0">
            <field name="name">
            <c8_array>1LIVE</c8_array>
        </field>
        <item key="1">
            <field name="name">
            <c8_array>Deutschlandfunk 91.3</c8_array>
        </field>

netRemote.nav.searchTerm

Search in the current navigation (see netRemote.nav.list)

/fsapi/SET/netRemote.nav.searchTerm?pin=1337&value=testsuche

netRemote.nav.state

Enables the navigation in the menu (see nav.list)

Every change of the system mode, will disable the nav state to reset the current menu-position.

Method: GET, SET

Sets / Returns the status of the navigation.

/fsapi/GET/netRemote.nav.state?pin=1337&sid=1974440588


<value><u8>1</u8></value>

netRemote.nav.status

While the device prepares the menu this node is set to 0, if the menu is ready it is set to 1.

Busy menus are caused by mode-change or nav.action.navigate

Method: GET

Returns the navigation status

/fsapi/GET/netRemote.nav.status?pin=1337

<value><u8>0</u8></value>

netRemote.nav.depth

Method: GET

Returns the current navigation menu depth

/fsapi/GET/netRemote.nav.depth?pin=1337

<value><u8>0</u8></value>

platform
Platform

netRemote.platform.softApUpdate.updateModeStatus

TODO

Method: ??

???

netRemote.platform.softApUpdate.updateModeRequest

TODO

Method: ??

???

play
Play

netRemote.play.addPreset

Method: SET

Add the current radio stations to the favorites menu

/fsapi/SET/netRemote.play.addPreset?pin=1337&value=5

netRemote.play.addPresetStatus

TODO

Method: ??

???

netRemote.play.caps

TODO

Method: GET

Returns ???

/fsapi/GET/netRemote.play.caps?pin=1337&sid=1672745554


empty: <value><u32>0</u32></value>

1LIVE diGGi: <value><u32>2060</u32></value>

netRemote.play.control

Method: GET, SET

Scope: Mediaplayer / Radio

Sets / Return the current play-controll mode

1=Play; 2=Pause; 3=Next (song/station); 4=Previous (song/station)

/fsapi/GET/netRemote.play.control?pin=1337&sid=1737628193

<value><u8>0</u8></value>

netRemote.play.errorStr

Method: GET

/fsapi/GET/netRemote.play.errorStr?pin=1337

<value><c8_array></c8_array></value>

netRemote.play.feedback

TODO

Method: ??

???

netRemote.play.frequency

Method: GET, SET

Sets / Returns the current frequency for fm (in herz)

/fsapi/GET/netRemote.play.frequency?pin=1337&sid=615989613

<value><u32>96700</u32></value>

96700 = 96,70 MHz

netRemote.play.info.album

Method: GET

Returns the name of the album of the current song

/fsapi/GET/netRemote.play.info.album?pin=1337&sid=23681281


<value><c8_array></c8_array></value>

netRemote.play.info.artist

Method: GET

Returns the name of the artist of the current song

/fsapi/GET/netRemote.play.info.artist?pin=1337&sid=1303639071

<value><c8_array></c8_array></value>

netRemote.play.info.duration

Method: GET

Returns the duration for the track in milliseconds

/fsapi/GET/netRemote.play.info.duration?pin=1337&sid=1431798833

<value><u32>0</u32></value>

netRemote.play.info.graphicUri

Method: GET

Returns the uri of an image representing the current song / station

/fsapi/GET/netRemote.play.info.graphicUri?pin=1337&sid=1566925260

empty: <value><c8_array></c8_array></value>
1LIVE Online: <value><c8_array>http://aldi.wifiradiofrontier.com/setupapp/setup1/logo/logo-531.png</c8_array></value>

netRemote.play.info.name

Method: GET

Returns the first line of the display

/fsapi/GET/netRemote.play.info.name?pin=1337&sid=548290233

empty: <value><c8_array></c8_array></value>

1LIVE diGGi: <value><c8_array>1LIVE diGGi     </c8_array></value>

netRemote.play.info.text

Method: GET

Returns the second line of the display

/fsapi/GET/netRemote.play.info.text?pin=1337&sid=429343323

empty: <value><c8_array></c8_array></value>

1LIVE diGGi: <value><c8_array>Infos und Playlist auch im Netz: 1livediggi.de</c8_array></value>

netRemote.play.position

Method: GET, SET

Sets / Returns the current position in the track in milliseconds

Keep in mind to get the max position by netRemote.play.info.duration.

/fsapi/GET/netRemote.play.position?pin=1337&sid=984827477

<value><u32>0</u32></value>

netRemote.play.rate

Method: GET, SET

Sets / Returns the current play-rate multiplier

The value determines the speed of the playback. It can be in the range of -127 to 127 where the negative part plays the current track backwards.

/fsapi/GET/netRemote.play.rate?pin=1337&sid=635775977

<value><s8>0</s8></value>

netRemote.play.repeat

Method: GET, SET

Scope: Music Player

Sets / Returns whether or not repeat is enabled or not

/fsapi/GET/netRemote.play.repeat?pin=1337&sid=506326863


<value><u8>0</u8></value>

netRemote.play.scrobble

Method: GET

Returns whether or not scrobble is enabled or not

/fsapi/GET/netRemote.play.scrobble?pin=1337&sid=1961792010


<value><u8>0</u8></value>

netRemote.play.serviceIds.dabEnsembleId

Method: GET

Returns DAB Ensemble Identifier (decimal notation) Note: commonly used in Hex notation. In this example that would be "C1CE" i.e. the UK's "SDL National" multiplex

/fsapi/GET/netRemote.play.serviceIds.dabEnsembleId?pin=1337

<value><u16>49614</u16></value>

netRemote.play.serviceIds.dabScids

Method: GET

Returns the DAB Service Component Identifier (decimal notation) Note: Nearly always 0 for audio services - Secondary Component services will have a different value - e.g. when tuned to "<<BBC R5LiveSportX"

/fsapi/GET/netRemote.play.serviceIds.dabScids?pin=1337

<value><u8>0</u8></value>

netRemote.play.serviceIds.dabServiceId

Method: GET

Returns DAB Service Identifier (decimal notation) Note: commonly used in Hex notation. In this example that would be "CED7" i.e. the UK's "Magic Chilled" service

/fsapi/GET/netRemote.play.serviceIds.dabServiceId?pin=1337

<value><u32>52951</u32></value>

netRemote.play.serviceIds.ecc

Method: GET

Returns Extended Country Code (decimal notation) as defined in ETSI TS 101 756 Note: commonly used in Hex notation. Defined in ETSI TS 101 756, used in conjunction with the first character (in Hex notation) of the dabServiceId to identify the country. e.g. dabServiceId 52951 (CED7); ecc 225 (E1); Global Country Code of CE1 = United Kingdom dabServiceId 57233 (DF91); ecc 224 (E0); gives a Global Country Code of DE0 = Germany

/fsapi/GET/netRemote.play.serviceIds.ecc?pin=1337

<value><u8>225</u8></value>

netRemote.play.serviceIds.fmRdsPi

TODO : Confirm if this works on other radios

Method: GET

Returns RDS Programme Identification code (or rather should, the Roberts Stream 93i Returns 0 for all services)

/fsapi/GET/netRemote.play.serviceIds.fmRdsPi?pin=1337


<value><u16>0</u16></value>

netRemote.play.shuffle

Method: GET, SET

Scope: Music-Player

Sets / Returns whether or not shuffle is enabled or not (1/0)

/fsapi/GET/netRemote.play.shuffle?pin=1337&sid=1843354907

<value><u8>0</u8></value>

netRemote.play.shuffleStatus

TODO

Method: GET, SET

Is part of the new api version

/fsapi/GET/netRemote.play.shuffleStatus?pin=1337&sid=1843354907

FS_NODE_DOES_NOT_EXIST

netRemote.play.signalStrength

Method: GET

Returns the signal strenght of the current medium

/fsapi/GET/netRemote.play.signalStrength?pin=1337&sid=1226842809

<value><u8>0</u8></value>

netRemote.play.status

Method: GET

Returns status of the player

1=buffering/loading, 2=playing, 3=paused

/fsapi/GET/netRemote.play.status?pin=1337&sid=973104948


<value><u8>0</u8></value>

Method: GET, SET

Sets / Returns the first value for costum eq-settings (Bass)

Range: -7 to 7

/fsapi/GET/netRemote.sys.audio.eqCustom.param0?pin=1337&sid=1789657498

<value><s16>1</s16></value>

netRemote.sys.audio.eqCustom.param1

Method: GET, SET

Sets / Returns the second value for costum eq-settings (Treble)

Range: -7 to 7

/fsapi/GET/netRemote.sys.audio.eqCustom.param1?pin=1337&sid=1636927329

<value><s16>1</s16></value>

netRemote.sys.audio.eqCustom.param2

TODO

Method: ??

???

netRemote.sys.audio.eqCustom.param3

TODO

Method: ??

???

netRemote.sys.audio.eqCustom.param4

TODO

Method: ??

???

netRemote.sys.audio.eqLoudness

Method: GET, SET

Sets / Returns whether or not loudness is activated

This function is only available if costum eq is active

/fsapi/GET/netRemote.sys.audio.eqLoudness?pin=1337&sid=1033306501

<value><u8>0</u8></value>

netRemote.sys.audio.eqPreset

Method: GET, SET

Sets / Returns the number of the selected eq-presets

see: netRemote.sys.caps.eqPresets for valid presets.

/fsapi/GET/netRemote.sys.audio.eqPreset?pin=1337&sid=643480027

<value><u8>5</u8></value>

netRemote.sys.audio.extStaticDelay

TODO

Method: ??

???

netRemote.sys.audio.mute

Method: GET, SET

Sets / Returns whether or not device is muted

/fsapi/GET/netRemote.sys.audio.mute?pin=1337&sid=1932538906

<value><u8>0</u8></value>

netRemote.sys.audio.volume

Method: GET, SET

Sets / Returns the volume of the device (Range: 1-20)

/fsapi/GET/netRemote.sys.audio.volume?pin=1337&sid=218069529

<value><u8>4</u8></value>

netRemote.sys.caps.clockSourceList

Method: GET

Fetch the list of available time sources

/fsapi/LIST_GET_NEXT/netRemote.sys.caps.clockSourceList/-1?pin=1234&maxItems=65536

<fsapiResponse>
  <status>FS_OK</status>
  <item key="0">
    <field name="source"><c8_array>DAB</c8_array></field>
  </item>
  <item key="1">
    <field name="source"><c8_array>FM</c8_array></field>
  </item>
  <item key="2">
    <field name="source"><c8_array>NETWORK</c8_array></field>
  </item>
  <item key="3">
    <field name="source"><c8_array>NO_UPDATE</c8_array></field>
  </item>
  <listend/>
</fsapiResponse>

netRemote.sys.caps.dabFreqList

TODO

Method: LIST_GET_NEXT

Lists available dab-frequencies

    /fsapi/LIST_GET_NEXT/netRemote.sys.caps.dabFreqList/-1?pin=1337&maxItems=65536

      <item key="0">
            <fieldname="freq">
                <u32>174928</u32>
                </field>
            <fieldname="label">
                <c8_array>5A</c8_array>
            </field>
        </item>
      <item key="1">
            <fieldname="freq">
                <u32>176640</u32>
                </field>
            <fieldname="label">
                <c8_array>5B</c8_array>
            </field>
        </item>

netRemote.sys.caps.eqBands

Method: LIST_GET_NEXT

Lists setted modes for the eq

/fsapi/LIST_GET_NEXT/netRemote.sys.caps.eqBands/-1?pin=1337&sid=1082454528&maxItems=100


<item key="0">
<field name="label"><c8_array>Bass</c8_array></field>
<field name="min"><s16>-4</s16></field>
<field name="max"><s16>4</s16></field>

</item>
<item key="1">
<field name="label"><c8_array>Höhen</c8_array></field>
<field name="min"><s16>-4</s16></field>
<field name="max"><s16>4</s16></field>

</item>
<listend/>

netRemote.sys.caps.eqPresets

Method: LIST_GET_NEXT

Lists available eq-presets

/fsapi/LIST_GET_NEXT/netRemote.sys.caps.eqPresets/-1?pin=1337&sid=2058329265&maxItems=100

<item key="0">
<field name="label"><c8_array>Benutzer</c8_array></field>

</item>
<item key="1">
<field name="label"><c8_array>Normal</c8_array></field>
[...]
<listend/>

netRemote.sys.caps.extStaticDelayMax

TODO

Method: ??

???

netRemote.sys.caps.fmFreqRange.lower

Method: GET

Returns the lowest available fm-frequency

/fsapi/GET/netRemote.sys.caps.fmFreqRange.lower?pin=1337&sid=1005285685

<value><u32>87500</u32></value>

netRemote.sys.caps.fmFreqRange.stepSize

Method: GET

Returns the size of the steps for increasing / decreasing the frequency

/fsapi/GET/netRemote.sys.caps.fmFreqRange.stepSize?pin=1337&sid=1369641108

<value><u32>50</u32></value>

netRemote.sys.caps.fmFreqRange.upper

Method: GET

Returns the highest available fm-frequency

/fsapi/GET/netRemote.sys.caps.fmFreqRange.upper?pin=1337&sid=1771149341

<value><u32>108000</u32></value>

netRemote.sys.caps.utcSettingsList

TODO

Method: GET

???

/fsapi/LIST_GET_NEXT/netRemote.sys.caps.utcSettingsList/-1?pin=1234&maxItems=30

<fsapiResponse>
  <status>FS_OK</status>
  <item key="0">
    <field name="time"><s32>-43200</s32></field>
    <field name="region"><c8_array>Intern. Datumsgrenze West</c8_array></field>
  </item>
  <item key="1">
    <field name="time"><s32>-41400</s32></field>
    <field name="region"><c8_array/></field>
  </item>
  <item key="2">
    <field name="time"><s32>-39600</s32></field>
    <field name="region"><c8_array>Midway Insel, Samoa</c8_array></field>
  </item>
  <item key="3">
    <field name="time"><s32>-37800</s32></field>
    <field name="region"><c8_array/></field>
  </item>
  <item key="4">
    <field name="time"><s32>-36000</s32></field>
    <field name="region"><c8_array>Hawaii</c8_array></field>
  </item>
...

netRemote.sys.caps.validLang

TODO

Method: ??

???

netRemote.sys.caps.validModes

Method: LIST_GET_NEXT

Lists valid operation modes

/fsapi/LIST_GET_NEXT/netRemote.sys.caps.validModes/-1?pin=1337&sid=300029608&maxItems=100

<fsapiResponse>
  <status>FS_OK</status>
  <item key="0">
    <field name="id"><c8_array>IR</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>Internet Radio</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>0</u8></field>
  </item>
  <item key="1">
    <field name="id"><c8_array>Spotify</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>Spotify Connect</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>0</u8></field>
  </item>
  <item key="2">
    <field name="id"><c8_array>DMR</c8_array></field>
    <field name="selectable"><u8>0</u8></field>
    <field name="label"><c8_array>DMR</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>0</u8></field>
  </item>
  <item key="3">
    <field name="id"><c8_array>MP</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>Musik abspielen</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>1</u8></field>
  </item>
  <item key="4">
    <field name="id"><c8_array>DAB</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>DAB</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>0</u8></field>
  </item>
  <item key="5">
    <field name="id"><c8_array>FM</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>FM</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>0</u8></field>
  </item>
  <item key="6">
    <field name="id"><c8_array>AUXIN</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>AUX Eingang</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>1</u8></field>
  </item>
  <item key="7">
    <field name="id"><c8_array>CD</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>CD</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>1</u8></field>
  </item>
  <item key="8">
    <field name="id"><c8_array>BLUETOOTH</c8_array></field>
    <field name="selectable"><u8>1</u8></field>
    <field name="label"><c8_array>Bluetooth</c8_array></field>
    <field name="streamable"><u8>1</u8></field>
    <field name="modetype"><u8>1</u8></field>
  </item>
  <item key="9">
    <field name="id"><c8_array>NETWORK</c8_array></field>
    <field name="selectable"><u8>0</u8></field>
    <field name="label"><c8_array/></field>
    <field name="streamable"><u8>0</u8></field>
    <field name="modetype"><u8>0</u8></field>
  </item>
  <listend/>
</fsapiResponse>

netRemote.sys.caps.volumeSteps

Method: GET

Returns the max volume level

/fsapi/GET/netRemote.sys.caps.volumeSteps?pin=1337&sid=896363579

<value><u8>21</u8></value>

netRemote.sys.clock.dateFormat

TODO

Method: ??

???

netRemote.sys.clock.dst

Method: GET, SET

Fetch/set daylight saving setting

/fsapi/GET/netRemote.sys.clock.dst?pin=1234

<fsapiResponse>
 <status>FS_OK</status>
 <value><u8>0</u8></value>
</fsapiResponse>

netRemote.sys.clock.localDate

Method: GET

Returns the local Date in XML-RPC date format ( 20150914 = 2015-09-14)

/fsapi/GET/netRemote.sys.clock.localDate?pin=1337&sid=1947840669

<value><c8_array>20150914</c8_array></value>

netRemote.sys.clock.localTime

Method: GET

Returns the local time in XML-RPC date format ( 093327 = 09:33:27)

/fsapi/GET/netRemote.sys.clock.localTime?pin=1337&sid=1947840669

<value><c8_array>093327</c8_array></value>

netRemote.sys.clock.mode

Method: GET, SET

Set the clock to 12h or 24 hour mode

Values:

0: 12h
1: 24h

GET /fsapi/GET/netRemote.sys.clock.mode?pin=1234

<fsapiResponse>
 <status>FS_OK</status>
 <value><u8>1</u8></value>
</fsapiResponse>

netRemote.sys.clock.source

Method: GET, SET

Fetch/set the time source (DAB, FM, Internet, manual).

Valid values can be fetched with netRemote.sys.caps.clockSourceList.

/fsapi/GET/netRemote.sys.clock.source?pin=1234

<fsapiResponse>
 <status>FS_OK</status>
 <value><u8>1</u8></value>
</fsapiResponse>

netRemote.sys.clock.utcOffset

Method: GET, SET

Get/set the offset of the local time compared to UTC.

Valid values can be fetched with netRemote.sys.caps.utcSettingsList.

/fsapi/GET/netRemote.sys.clock.utcOffset?pin=1234

<fsapiResponse>
 <status>FS_OK</status>
 <value><s32>0</s32></value>
</fsapiResponse>

netRemote.sys.cfg.irAutoPlayFlag

TODO

Method GET,SET

Is part of the new API Version.

/fsapi/SET/netRemote.sys.cfg.irAutoPlayFlag?pin=1337&value=0

<value><u8>0</u8></value>

netRemote.sys.factoryReset

TODO

Method: ??

???

netRemote.sys.info.activeSession

TODO

Method: ??

???

netRemote.sys.info.dmruuid

TODO

Method: ??

???

netRemote.sys.info.friendlyName

Method: GET, SET

Sets/ Returns the Network-Name of the Device

/fsapi/GET/netRemote.sys.info.friendlyName?pin=1337&sid=1947840669

<value><c8_array>Radio</c8_array></value>

netRemote.sys.info.radioId

Method: GET

Returns unique? ID Radio-ID

/fsapi/GET/netRemote.sys.info.radioId?pin=1337&sid=1720678490

<value><c8_array>001122AABBCC</c8_array></value>

netRemote.sys.info.radioPin

Method: SET

Change the PIN used to access the radio API.

fsapi/SET/netRemote.sys.info.radioPin?pin=1337&value=1337

netRemote.sys.info.version

Method: GET

Returns Image-Version String

/fsapi/GET/netRemote.sys.info.version?pin=1337&sid=1784185740

<value><c8_array>ir-mmi-FS2026-0500-0036_V2.5.15.EX51267-4RC2</c8_array></value>

netRemote.sys.info.controllerName

Method: GET, SET

Get or Set the Name of the Device which is remote-controling the radio

/fsapi/GET/netRemote.sys.info.controllerName?pin=1337

<value><c8_array>Nexus 7</c8_array></value>

netRemote.sys.isu.control

2 = search for updates

Method GET,SET

/fsapi/SET/netRemote.sys.isu.control?pin=1337&value=2

netRemote.sys.isu.mandatory

TODO

Method: ??

???

netRemote.sys.isu.softwareUpdateProgress

TODO

Method: ??

???

netRemote.sys.isu.state

Shows the update process, default 0

while searching 1

after searching: 0

Method GET

/fsapi/GET/netRemote.sys.isu.state?pin=1337

<value><u8>1</u8></value>

netRemote.sys.isu.summary

TODO

Method: ??

???

netRemote.sys.isu.version

TODO

Method: ??

???

netRemote.sys.lang

Method: GET, SET

Retrieve/set the radio user interface language

/fsapi/GET/netRemote.sys.lang?pin=1337&sid=539517630

<value><u32>0</u32></value>

netRemote.sys.mode

Method: GET, SET

Sets / Returns the current operation mode

see netRemote.sys.caps.validModes for valid operation modes

/fsapi/GET/netRemote.sys.mode?pin=1337&sid=300029608

<value><u32>4294967295</u32></value>

netRemote.sys.net.commitChanges

TODO

Method: ??

???

netRemote.sys.net.ipConfig.address

Method: GET

Returns the IP address for the connected network

/fsapi/GET/netRemote.sys.net.ipConfig.address?pin=1337&sid=1178490789


<value><u32>3232235576</u32></value>

netRemote.sys.net.ipConfig.dhcp

Method: GET

Returns if DHCP is enabled for the connected network

/fsapi/GET/netRemote.sys.net.ipConfig.dhcp?pin=1337&sid=208317414

<value><u8>1</u8></value>

netRemote.sys.net.ipConfig.dnsPrimary

Method: GET

Returns the primary dns for the connected network

/fsapi/GET/netRemote.sys.net.ipConfig.dnsPrimary?pin=1337&sid=1796481137

<value><u32>3232235521</u32></value>

netRemote.sys.net.ipConfig.dnsSecondary

Method: GET

Returns the secondary dns for the connected network

/fsapi/GET/netRemote.sys.net.ipConfig.dnsSecondary?pin=1337&sid=1171925458

<value><u32>0</u32></value>

netRemote.sys.net.ipConfig.gateway

Method: GET

Returns the default gateway for the connected network

/fsapi/GET/netRemote.sys.net.ipConfig.gateway?pin=1337&sid=1545150372


<value><u32>3232235521</u32></value>

netRemote.sys.net.ipConfig.subnetMask

Method: GET

Returns the subnet mask for the connected network

/fsapi/GET/netRemote.sys.net.ipConfig.subnetMask?pin=1337&sid=1852331719

<value><u32>4294967040</u32></value>

netRemote.sys.net.keepConnected

Method GET, SET

If set to 1 network connection is not disconnected in standby

/fsapi/SET/netRemote.sys.net.keepConnected?pin=1337&value=1

netRemote.sys.net.wired.interfaceEnable

Method: GET

Returns the NIC Status of the Ethernet Device

/fsapi/GET/netRemote.sys.net.wired.interfaceEnable?pin=1337&sid=441427276
<value><u8>1</u8></value>

netRemote.sys.net.wired.macAddress

Method: GET

Returns the MAC Address of the Ethernet Device

/fsapi/GET/netRemote.sys.net.wired.macAddress?pin=1337&sid=636641042

<value><c8_array>00:11:22:33:44:FF</c8_array></value>

netRemote.sys.net.wlan.connectedSSID

Method: GET

Returns the SSID of the connected WIFI network

/fsapi/GET/netRemote.sys.net.wlan.connectedSSID?pin=1337&sid=829201793

Example

netRemote.sys.net.wlan.interfaceEnable

Method: GET

Returns the NIC Status of the WIFI Device

/fsapi/GET/netRemote.sys.net.wlan.interfaceEnable?pin=1337&sid=1390762771

<value><u8>0</u8></value>

netRemote.sys.net.wlan.macAddress

Method: GET

Returns the MAC Address of the WIFI Device

/fsapi/GET/netRemote.sys.net.wlan.macAddress?pin=1337&sid=32327402

<value><c8_array>00:11:22:33:44:FF</c8_array></value>

netRemote.sys.net.wlan.setAuthType

TODO

Method: GET

Returns the ??? of the connected WIFI network

/fsapi/GET/netRemote.sys.net.wlan.setAuthType?pin=1337&sid=924278502

Example...

netRemote.sys.net.wlan.setEncType

Method: GET

Returns the Encryption Type of the connected WIFI network

/fsapi/GET/netRemote.sys.net.wlan.setEncType?pin=1337&sid=1860534785

Example...

netRemote.sys.power

Method: GET, SET

Sets / Returns the current power state

If device returns from standby it will only auto-continue to play in radio-modes.

/fsapi/GET/netRemote.sys.power?pin=1337&sid=150145723

<value><u8>0</u8></value>

netRemote.sys.sleep

Method: GET, SET

Sets / Returns the Time till Sleep in seconds (0 = No Sleep) [works with Firmware V2.9.10 but not with V2.6.17]

/fsapi/GET/netRemote.sys.sleep?pin=1337

<value><u32>97</u32></value>

netRemote.sys.state

netRemote.sys.rsa.publicKey

Method: GET

Fetch the public RSA key that is used to encrypt the Wifi password before sending it to the radio.

<fsapiResponse>
  <status>FS_OK</status>
  <value><c8_array>010001:CACDC44CC87DA7999B52C15F947E51DF393DD74F08FD91E054B65CADB354673209E4D340E9613AECE1870B8CC69423B75F7F66EAAB351F1992C599007928817F676052EAD3DF2C3A8E9916F7595581E317C103E5B4460EA1F955D6309ED9C4A404E67C1BF7FF38475E3EE8CBBBD90FBB2FAAFD068ABE25D156B7AE3529A748C7</c8_array></value>
</fsapiResponse>

netRemote.sys.rsa.status

Method: GET

Check the status of the RSA key generation.

0: Generating
1: Ready

<fsapiResponse>
  <status>FS_OK</status>
  <value><u8>1</u8></value>
</fsapiResponse>

netRemote.sys.ipod.dockStatus

TODO

TODO

Method: ??

???

← Previous Page ExFrontier

Settings View Source FSAPI Documentation

nodes Nodes

operations Operations

SET

GET

LIST_GET_NEXT

CREATE_SESSION

DELETE_SESSION

GET_NOTIFIES

status-codes Status Codes

HTTP 200 OK

HTTP 404 Not Found

HTTP 403 Forbidden

return-values Return Values

FS_OK

FS_FAIL

FS_PACKET_BAD

FS_NODE_BLOCKED

FS_NODE_DOES_NOT_EXIST

FS_TIMEOUT

FS_LIST_END

session-handling Session Handling

Session-ID

Pin

reference Reference

airplay Airplay

netRemote.airplay.clearPassword

netRemote.airplay.setPassword

multiroom Multiroom

netRemote.multiroom.caps.maxClients

netRemote.multiroom.caps.protocolVersion

netRemote.multiroom.client.statusX

netRemote.multiroom.device.listAll

netRemote.multiroom.device.listAllVersion

netRemote.multiroom.device.serverStatus

netRemote.multiroom.device.clientStatus

netRemote.multiroom.device.clientIndex

netRemote.multiroom.device.transportOptimisation

netRemote.multiroom.group.becomeServer

netRemote.multiroom.group.removeClient

netRemote.multiroom.group.streamable

netRemote.multiroom.group.create

netRemote.multiroom.group.addClient

netRemote.multiroom.group.attachedClients

netRemote.multiroom.group.destroy

netRemote.multiroom.group.name

netRemote.multiroom.group.id

netRemote.multiroom.group.state

netRemote.multiroom.client.volumeX

netRemote.multiroom.client.muteX

netRemote.multiroom.group.masterVolume

misc Misc

netRemote.misc.fsDebug.component

netRemote.misc.fsDebug.traceLevel

nav Nav

netRemote.nav.action.dabPrune

netRemote.nav.action.dabScan

netRemote.nav.action.navigate

netRemote.nav.action.selectItem

netRemote.nav.action.selectPreset

netRemote.nav.caps

netRemote.nav.browseMode

netRemote.nav.dabScanUpdate

netRemote.nav.errorStr

netRemote.nav.list

netRemote.nav.numItems

netRemote.nav.presets

netRemote.nav.searchTerm

netRemote.nav.state

netRemote.nav.status

netRemote.nav.depth

platform Platform

netRemote.platform.softApUpdate.updateModeStatus

netRemote.platform.softApUpdate.updateModeRequest

play Play

netRemote.play.addPreset

netRemote.play.addPresetStatus

netRemote.play.caps

netRemote.play.control

netRemote.play.errorStr

View Source FSAPI Documentation

nodes
Nodes

operations
Operations

status-codes
Status Codes

return-values
Return Values

session-handling
Session Handling

reference
Reference

airplay
Airplay

multiroom
Multiroom

misc
Misc

nav
Nav

platform
Platform

play
Play

spotify
Spotify

system
System