exbee

v0.0.5

exbee v0.0.5 Exbee.ExplicitTxFrame View Source

Similar to the Exbee.TxFrame, but requires specific addressing fields.

  • For broadcast transmissions, set :mac_addr to 0x000000000000FFFF.
  • Address the coordinator by either setting the mac_addr to 0x00 and :network_addr to 0xFFFE, or by setting :mac_addr to the coordinator’s mac address and :network_addr to 0x0000.
  • For all other transmissions, setting :network_addr to the correct 16-bit address helps improve performance when transmitting to multiple endpoints. If you do not know a the endpoint’s network address, set it to 0xFFFE (unknown).

The :radius attributes can be set from 0 to 0xFF. If set to 0, the value of the Maximum Unicast Hops(NH) command specifies the broadcast radius (recommended). This parameter is only used for broadcast transmissions.

Possible :option values:

  • 0x01 - Disable retries
  • 0x20 - Enable APS encryption (if EE=1)
  • 0x40 - Use the extended transmission timeout for this destination

An Exbee.TxResultFrame will be returned indicating the status of the transmission.

Link to this section Summary

Types

t()

Link to this section Types

Link to this type t() View Source 
t() :: %Exbee.ExplicitTxFrame{
  cluster_id: integer(),
  endpoint: integer(),
  id: integer(),
  mac_addr: integer(),
  network_addr: integer(),
  options: integer(),
  payload: binary(),
  profile_id: integer(),
  radius: integer(),
  source: integer()
}