mavlink

v0.7.0

mavlink v0.7.0 APM.Message.ServoOutputRaw View Source

Link to this section Summary

Types

t()

The RAW values of the servo outputs (for RC input from the remote, use the RC_CHANNELS messages). The standard PPM modulation is as follows: 1000 microseconds: 0%, 2000 microseconds: 100%.

Link to this section Types

Link to this type

t() View Source 
t() :: %APM.Message.ServoOutputRaw{
  port: MAVLink.Types.uint8_t(),
  servo10_raw: MAVLink.Types.uint16_t(),
  servo11_raw: MAVLink.Types.uint16_t(),
  servo12_raw: MAVLink.Types.uint16_t(),
  servo13_raw: MAVLink.Types.uint16_t(),
  servo14_raw: MAVLink.Types.uint16_t(),
  servo15_raw: MAVLink.Types.uint16_t(),
  servo16_raw: MAVLink.Types.uint16_t(),
  servo1_raw: MAVLink.Types.uint16_t(),
  servo2_raw: MAVLink.Types.uint16_t(),
  servo3_raw: MAVLink.Types.uint16_t(),
  servo4_raw: MAVLink.Types.uint16_t(),
  servo5_raw: MAVLink.Types.uint16_t(),
  servo6_raw: MAVLink.Types.uint16_t(),
  servo7_raw: MAVLink.Types.uint16_t(),
  servo8_raw: MAVLink.Types.uint16_t(),
  servo9_raw: MAVLink.Types.uint16_t(),
  time_usec: MAVLink.Types.uint32_t()
}

The RAW values of the servo outputs (for RC input from the remote, use the RC_CHANNELS messages). The standard PPM modulation is as follows: 1000 microseconds: 0%, 2000 microseconds: 100%.