CHANGELOG

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[unreleased]

added

[ ] Pfx.range(prefix) -> "first - last"

[v0.14.2] - 2024-10-21

fixed

Thanks to elfenlaid: Fix Elixir 1.17 compilation warnings #1 charlists should be specified using the ~c sigil, using single quotes has been depracated.

[v0.14.1] - 2022-02-20

fixed

in mix.exs, list :inets and :xmerl as extra application for all modes
mix iana.specials should write to Pfx's priv/specials, not that of parent project that has Pfx as a dependency.

[v0.14.0] - 2022-02-19

added

mix task to update the local snapshot of the IANA IPv4/6 special registries
- mix iana.specials will update the local registry (if needed)

changed

formatting an IPv6 prefix now uses '::' where appropiate
Iana special registry entries now include :termination date as well
- which is usually :na and sometimes "yyyy-mm"

[v0.13.0] - 2022-01-23

added

Pfx.invert/1, as a proxy for Pfx.bnot/1, whose name is somewhat more obscure
- has a note saying that using bnot directly, actually saves a function call

changed

Pfx.compare/2, now compares prefixes of mixed types as well (using the maxlen property)
Pfx.format/2, when given a :unit of 0 it reverts to the prefix's maxlen

fixed

Pfx.minimize/1
- yields results in the same fashion as the first prefix in the list
- needed an pre-sort based on 'first-address' and then on bit_size in order to really minimize a list of prefixes

[v0.12.0] - 2022-01-16

added

Pfx.sigil_p/2, so ~p"1.1.1.0/24" yields %Pfx{bits: <<1, 1, 1>>, maxlen: 32}
- modifiers to get address, mask, first, last, neighbor, parent or trimmed result instead
- additional modifiers to invert the result and/or turn it into a string or tuple format.
Pfx.sigil_p/3, which allows for piping into ~p()
Pfx.iana_special/2, returns properties for a prefix, based on iana's special IPv4/6 registries.

changed

Pfx.address/1 now properly returns a full address prefix, always without mask
- example: address({{1, 1, 1, 1}, 24}) -> {1, 1, 1, 1}

[v0.11.0] - 2022-01-11

fixed

Pfx.contrast/2 1.1.1.0/24 is left-adjacent to 1.1.2.0/25, not disjoint!
- added :left_nc and :right_nc => left/right adjacent and but not combinable
- added :incompatible for when two prefixes have different maxlen's (not raise ArgumentError)
- added :einvalid if one of the prefixes is invalid (not raise ArgumentError)

added

Pfx.minimize/1, minimizes a list of prefixes while covering the same address range(s).
- prefixes are grouped and minimized per maxlen property

[v0.10.1] - 2022-01-09

fixed

Pfx.member/3, check width argument for validity and raise ArgumentError if invalid
fixed the Enumerable.Pfx.slice/1 implementation, so Enum.take & friends work properly

[v0.10.0] - 2021-12-29

added

Pfx.partition_range/2 which returns a list of prefixes, where range is given by:
- a start prefix and a stop prefix, or
- a start prefix and a number of hosts
Pfx.to_tuple/2 to convert (with options) a prefix into an address-tuple
- option :mask, default true, applies the mask and yields an address,length-tuple
- option :width default 8 (or 16 in case maxlen is 128)
- the width option allows for converting prefixes other than ipv4/6, eui48/64 as well

[v0.9.0] - 2021-12-03

added

Pfx.address/1, returns the address portion of given prefix without applying a mask.
Pfx.type/1 which returns either :ip4, :ip6, :eui48, :eui64 or the prefix.maxlen property

fixed

typespec for Pfx.new now includes Pfx.t as argument as well
typespec for some others too

[v0.8.0] - 2021-11-15

added

changed

type spec for t:Pfx.prefix/t now uses t instead of Pfx.t()

[v0.7.0] - 2021-07-27

added

Pfx.pfxlen/1 returns the number of bits in the prefix

changed

Pfx.mask/2 now takes 2 options (inv_mask and trim) and trims result by default

[v0.6.0] - 2021-07-22

added

Pfx.trim/1 trims all trailing zero's from given prefix
Pfx.mask/2 applies mask to prefix (changing its prefix.bits string)

[v0.5.0] - 2021-07-17

changed

"Pfx.multicast/1" renamed to Pfx.multicast_decode/1 and updated decoding
Pfx.eui64_encode/1 now also accepts EUI-64 (only needs to flip 7th bit)

added

added Pfx.first/1 as a more generic version of Pfx.network/1
added Pfx.last/1 as a more generic version of Pfx.broadcast/1
added Pfx.from_hex/1 to create a Pfx.t/0 from any hex string

[v0.4.0] - 2021-07-10

added

Pfx.eui64_encode/1, which creates a modified EUI-64 from a EUI-48 address
Pfx.eui64_decode/1, which reverses a modified EUI-64 to an EUI-48 address
Pfx.flip/2, which flips a single bit in bitstring
Pfx.insert/3, which inserts some bits into bitstring
Pfx.remove/3, which removes some bits from bitstring

changed

Pfx.new/1 and Pfx.from_mac/1 also parse EUI-64 in Cisco's dot format
Pfx.teredo_decode/1 mirrors the representation for server/client to its pfx argument
functions raise their own exceptions when marshalling (instead of leaving that up to Pfx.new/1)

[v0.3.0] - 2021-07-08

added

Pfx.keep/2 to keep some msb bits
String.Chars for MAC addresses with maxlen 64 (w/ hyphens)
Pfx.from_mac/1 to support EUI-64 with ":"'s

changed

Pfx.new/1 now parses EUI-48 as well
Pfx.new/1 now parses EUI-64 as well, unless using ':' for punctuation
String.Chars for MAC addresses with maxlen 48 uses hyphens
String.Chars no longer accepts invalid Pfx.t/0 structs
Pfx.format/2 without opts, uses same defaults as String.Chars

[v0.2.1] - 2021-07-04

added

Pfx.marshall/2 is now a public function

changed

renamed Pfx.teredo to Pfx.teredo_decode/1

[v0.2.0] - 2021-07-03

added

Pfx.teredo_encode/4
Pfx.drop/2, which drops some lsb bits
improved documentation

[v0.1.1] - 2021-07-03

changed

Pfx.band/2, result has same number of bits as its first argument
Pfx.bor/2, result has same number of bits as its first argument
Pfx.bxor/2, result has same number of bits as its first argument
IPv6 addresses in lowercase

fixed

Pfx.brot/2, won't choke on rotating empty pfx.bits
Pfx.contrast/2, 1.2.3.0/24 is really to the left of 1.2.4.0/24

[v0.1.0] - 2021-06-28

initial version

← Previous Page License