Assigns a value to a key in the connection.

The "assigns" storage is meant to be used to store values in the connection so that other plugs in your plug pipeline can access them. The assigns storage is a map.

Examples

iex> conn.assigns[:hello]
nil
iex> conn = assign(conn, :hello, :world)
iex> conn.assigns[:hello]
:world

Sends a chunk as part of a chunked response.

It expects a connection with state :chunked as set by send_chunked/2. It returns {:ok, conn} in case of success, otherwise {:error, reason}.

To stream data use Enum.reduce_while/3 instead of Enum.into/2. Enum.reduce_while/3 allows aborting the execution if chunk/2 fails to deliver the chunk of data.

Example

Enum.reduce_while(~w(each chunk as a word), conn, fn (chunk, conn) ->
  case Plug.Conn.chunk(conn, chunk) do
    {:ok, conn} ->
      {:cont, conn}
    {:error, :closed} ->
      {:halt, conn}
  end
end)

Clears the entire session.

This function removes every key from the session, clearing the session.

Note that, even if clear_session/1 is used, the session is still sent to the client. If the session should be effectively dropped, configure_session/2 should be used with the :drop option set to true.

Configures the session.

Options

• :renew - generates a new session id for the cookie
• :drop - drops the session, a session cookie will not be included in the response
• :ignore - ignores all changes made to the session in this request cycle

Deletes a request header if present.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Examples

Plug.Conn.delete_req_header(conn, "content-type")

Deletes a response cookie.

Deleting a cookie requires the same options as to when the cookie was put. Check put_resp_cookie/4 for more information.

Deletes a response header if present.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Examples

Plug.Conn.delete_resp_header(conn, "content-type")

Deletes key from session.

The key can be a string or an atom, where atoms are automatically converted to strings.

Fetches cookies from the request headers.

Fetches query parameters from the query string.

Params are decoded as "x-www-form-urlencoded" in which key/value pairs are separated by & and keys are separated from values by =.

This function does not fetch parameters from the body. To fetch parameters from the body, use the Plug.Parsers plug.

Options

• :length - the maximum query string length. Defaults to 1_000_000 bytes.

Fetches the session from the session store. Will also fetch cookies.

Returns the HTTP protocol and version.

Examples

iex> get_http_protocol(conn)
:"HTTP/1.1"

Returns the request peer data if one is present.

Returns the values of the request header specified by key.

Examples

iex> get_req_header(conn, "accept")
["application/json"]

Returns the values of the response header specified by key.

Examples

iex> conn = %{conn | resp_headers: [{"content-type", "text/plain"}]}
iex> get_resp_header(conn, "content-type")
["text/plain"]

Returns the whole session.

Although get_session/2 and put_session/3 allow atom keys, they are always normalized to strings. So this function always returns a map with string keys.

Raises if the session was not yet fetched.

Returns session value for the given key. If key is not set, nil is returned.

The key can be a string or an atom, where atoms are automatically converted to strings.

Halts the Plug pipeline by preventing further plugs downstream from being invoked. See the docs for Plug.Builder for more information on halting a Plug pipeline.

Sends and informational response to the client.

An informational response, such as an early hint, must happen prior to a response being sent. If an informational request is attempted after a response is sent then a Plug.Conn.AlreadySentError will be raised. Only status codes from 100-199 are valid.

To use inform for early hints send one or more informs with a status of 103.

If the adapter does not support informational responses then this is a noop.

Most HTTP/1.1 clients do not properly support informational responses but some proxies require it to support server push for HTTP/2. You can call get_http_protocol/1 to retrieve the protocol and version.

Sends an information response to a client but raises if the adapter does not support inform.

See inform/1 for more information.

Assigns multiple values to keys in the connection.

Equivalent to multiple calls to assign/3.

Examples

iex> conn.assigns[:hello]
nil
iex> conn = merge_assigns(conn, hello: :world)
iex> conn.assigns[:hello]
:world

Assigns multiple private keys and values in the connection.

Equivalent to multiple put_private/3 calls.

Examples

iex> conn.private[:my_plug_hello]
nil
iex> conn = merge_private(conn, my_plug_hello: :world)
iex> conn.private[:my_plug_hello]
:world

Merges a series of response headers into the connection.

Example

Plug.Conn.merge_resp_headers(conn, [{"content-type", "text/plain"}, {"X-1337", "5P34K"}])

Prepends the list of headers to the connection response headers.

Similar to put_resp_header this functions adds a new response header (key) but rather then replacing the existing one it prepends another header with the same key.

It is recommended for header keys to be in lowercase, to avoid sending duplicate keys in a request. Additionally, responses with mixed-case headers served over HTTP/2 are not considered valid by common clients, resulting in dropped responses. As a convenience, when using the Plug.Adapters.Conn.Test adapter, any headers that aren't lowercase will raise a Plug.Conn.InvalidHeaderError.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Raises a Plug.Conn.InvalidHeaderError if the header value contains control feed (\r) or newline (\n) characters.

Examples

Plug.Conn.prepend_resp_headers(conn, [{"content-type", "application/json"}])

Pushes a resource to the client.

Server pushes must happen prior to a response being sent. If a server push is attempted after a response is sent then a Plug.Conn.AlreadySentError will be raised.

If the adapter does not support server push then this is a noop.

Note that certain browsers (such as Google Chrome) will not accept a pushed resource if your certificate is not trusted. In the case of Chrome this means a valid cert with a SAN. See https://www.chromestatus.com/feature/4981025180483584

Pushes a resource to the client but raises if the adapter does not support server push.

Assigns a new private key and value in the connection.

This storage is meant to be used by libraries and frameworks to avoid writing to the user storage (the :assigns field). It is recommended for libraries/frameworks to prefix the keys with the library name.

For example, if a plug called my_plug needs to store a :hello key, it would store it as :my_plug_hello:

iex> conn.private[:my_plug_hello]
nil
iex> conn = put_private(conn, :my_plug_hello, :world)
iex> conn.private[:my_plug_hello]
:world

Adds a new request header (key) if not present, otherwise replaces the previous value of that header with value.

It is recommended for header keys to be in lowercase, to avoid sending duplicate keys in a request. Additionally, requests with mixed-case headers served over HTTP/2 are not considered valid by common clients, resulting in dropped requests. As a convenience, when using the Plug.Adapters.Conn.Test adapter, any headers that aren't lowercase will raise a Plug.Conn.InvalidHeaderError.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Examples

Plug.Conn.put_req_header(conn, "accept", "application/json")

Sets the value of the "content-type" response header taking into account the charset.

If charset is nil, the value of the "content-type" response header won't specify a charset.

Examples

iex> conn = put_resp_content_type(conn, "application/json")
iex> get_resp_header(conn, "content-type")
["application/json; charset=utf-8"]

Puts a response cookie in the connection.

The cookie value is not automatically escaped. Therefore, if you want to store values with comma, quotes, and so on, you need to explicitly escape them or use a function such as Base.encode64(value, padding: false) when writing and Base.decode64(encoded, padding: false) when reading the cookie. Padding needs to be disabled since = is not a valid character in cookie values.

Options

• :domain - the domain the cookie applies to
• :max_age - the cookie max-age, in seconds. Providing a value for this option will set both the max-age and expires cookie attributes
• :path - the path the cookie applies to
• :http_only - when false, the cookie is accessible beyond HTTP
• :secure - if the cookie must be sent only over https. Defaults to true when the connection is HTTPS
• :extra - string to append to cookie. Use this to take advantage of non-standard cookie attributes.

Adds a new response header (key) if not present, otherwise replaces the previous value of that header with value.

It is recommended for header keys to be in lowercase, to avoid sending duplicate keys in a request. Additionally, responses with mixed-case headers served over HTTP/2 are not considered valid by common clients, resulting in dropped responses. As a convenience, when using the Plug.Adapters.Conn.Test adapter, any headers that aren't lowercase will raise a Plug.Conn.InvalidHeaderError.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Raises a Plug.Conn.InvalidHeaderError if the header value contains control feed (\r) or newline (\n) characters.

Examples

Plug.Conn.put_resp_header(conn, "content-type", "application/json")

Puts the specified value in the session for the given key.

The key can be a string or an atom, where atoms are automatically converted to strings. Can only be invoked on unsent conns. Will raise otherwise.

Stores the given status code in the connection.

The status code can be nil, an integer, or an atom. The list of allowed atoms is available in Plug.Conn.Status.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Examples

Plug.Conn.put_status(conn, :not_found)
Plug.Conn.put_status(conn, 200)

Reads the request body.

This function reads a chunk of the request body up to a given length (specified by the :length option). If there is more data to be read, then {:more, partial_body, conn} is returned. Otherwise {:ok, body, conn} is returned. In case of an error reading the socket, {:error, reason} is returned as per :gen_tcp.recv/2.

Like all functions in this module, the conn returned by read_body must be passed to the next stage of your pipeline and should not be ignored.

In order to, for instance, support slower clients you can tune the :read_length and :read_timeout options. These specify how much time should be allowed to pass for each read from the underlying socket.

Because the request body can be of any size, reading the body will only work once, as Plug will not cache the result of these operations. If you need to access the body multiple times, it is your responsibility to store it. Finally keep in mind some plugs like Plug.Parsers may read the body, so the body may be unavailable after being accessed by such plugs.

This function is able to handle both chunked and identity transfer-encoding by default.

Options

• :length - sets the maximum number of bytes to read from the body on every call, defaults to 8_000_000 bytes
• :read_length - sets the amount of bytes to read at one time from the underlying socket to fill the chunk, defaults to 1_000_000 bytes
• :read_timeout - sets the timeout for each socket read, defaults to 15_000 milliseconds

The values above are not meant to be exact. For example, setting the length to 8_000_000 may end up reading some hundred bytes more from the socket until we halt.

Examples

{:ok, body, conn} = Plug.Conn.read_body(conn, length: 1_000_000)

Reads the body of a multipart request.

Returns {:ok, body, conn} if all body has been read, {:more, binary, conn} otherwise, and {:done, conn} if there is no more body.

It accepts the same options as read_body/2.

Reads the headers of a multipart request.

It returns {:ok, headers, conn} with the headers or {:done, conn} if there are no more parts.

Once read_part_headers/2 is invoked, you may call read_part_body/2 to read the body associated to the headers. If read_part_headers/2 is called instead, the body is automatically skipped until the next part headers.

Options

• :length - sets the maximum number of bytes to read from the body for each chunk, defaults to 64_000 bytes
• :read_length - sets the amount of bytes to read at one time from the underlying socket to fill the chunk, defaults to 64_000 bytes
• :read_timeout - sets the timeout for each socket read, defaults to 5_000 milliseconds

Registers a callback to be invoked before the response is sent.

Callbacks are invoked in the reverse order they are defined (callbacks defined first are invoked last).

Examples

To log the status of requests being sent:

require Logger

Plug.Conn.register_before_send(conn, fn conn ->
  Logger.info("Sent a #{conn.status} response")
  conn
end)

Returns the full request URL.

Sets the response to the given status and body.

It sets the connection state to :set (if not already :set) and raises Plug.Conn.AlreadySentError if it was already :sent.

If you also want to send the response, use send_resp/1 after this or use send_resp/3.

The status can be an integer, an atom, or nil. See Plug.Conn.Status for more information.

Examples

Plug.Conn.resp(conn, 404, "Not found")

Sends the response headers as a chunked response.

It expects a connection that has not been :sent yet and sets its state to :chunked afterwards. Otherwise, raises Plug.Conn.AlreadySentError. After send_chunked/2 is called, chunks can be sent to the client via the chunk/2 function.

HTTP/2 does not support chunking and will instead stream the response without a transfer encoding. When using HTTP/1.1, the Cowboy adapter will stream the response instead of emitting chunks if the content-length header has been set before calling send_chunked/2.

Sends a file as the response body with the given status and optionally starting at the given offset until the given length.

If available, the file is sent directly over the socket using the operating system sendfile operation.

It expects a connection that has not been :sent yet and sets its state to :file afterwards. Otherwise raises Plug.Conn.AlreadySentError.

Examples

Plug.Conn.send_file(conn, 200, "README.md")

Sends a response to the client.

It expects the connection state to be :set, otherwise raises an ArgumentError for :unset connections or a Plug.Conn.AlreadySentError for already :sent connections.

At the end sets the connection state to :sent.

Note that this function does not halt the connection, so if subsequent plugs try to send another response, it will error out. Use halt/1 after this function if you want to halt the plug pipeline.

Examples

conn
|> Plug.Conn.resp(404, "Not found")
|> Plug.Conn.send_resp()

Sends a response with the given status and body.

This is equivalent to setting the status and the body and then calling send_resp/1.

Note that this function does not halt the connection, so if subsequent plugs try to send another response, it will error out. Use halt/1 after this function if you want to halt the plug pipeline.

Examples

Plug.Conn.send_resp(conn, 404, "Not found")

Updates a request header if present, otherwise it sets it to an initial value.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Only the first value of the header key is updated if present.

Examples

Plug.Conn.update_req_header(
  conn,
  "accept",
  "application/json; charset=utf-8",
  &(&1 <> "; charset=utf-8")
)

Updates a response header if present, otherwise it sets it to an initial value.

Raises a Plug.Conn.AlreadySentError if the connection has already been :sent or :chunked.

Only the first value of the header key is updated if present.

Examples

Plug.Conn.update_resp_header(
  conn,
  "content-type",
  "application/json; charset=utf-8",
  &(&1 <> "; charset=utf-8")
)