qcheck - v0.0.5

qcheck

QuickCheck-inspired property-based testing with integrated shrinking for Gleam.

Rather than specifying test cases manually, you describe the invariants that values of a given type must satisfy (“properties”). Then, generators generate lots of values (test cases) on which the properties are checked. Finally, if a value is found for which a given property does not hold, that value is “shrunk” in order to find an nice, informative counter-example that is presented to you.

While there are a ton of great articles introducing quickcheck or property-based testing, here are a couple general resources that you may enjoy:

You might also be interested in checking out this project that uses qcheck to test Gleam’s stdlib.

Usage & Examples

See API docs for detailed usage.

Basic example

Here is a short example to get you started. It assumes you are using gleeunit to run the tests, but any test runner that reasonably handles panics will do.

import qcheck

pub fn small_positive_or_zero_int__test() {
  use n <- qcheck.given(qcheck.small_positive_or_zero_int())
  n + 1 == 1 + n
}

pub fn small_positive_or_zero_int__failures_shrink_to_zero__test() {
  use n <- qcheck.given(qcheck.small_positive_or_zero_int())
  n + 1 != 1 + n
}

That second example will fail with an error that may look something like this if you are targeting Erlang.

 Failures:

  1) examples/basic_example_test.small_positive_or_zero_int__failures_shrink_to_zero__test
     Failure: <<"TestError[original_value: 3; shrunk_value: 0; shrink_steps: 1; error: property was False;]">>
     stacktrace:
       qcheck_ffi.fail

In-depth example

Here is a more in-depth example. We will create a simple Point type write some serialization functions, and then check that the serializing round-trips.

First here is some code to define a Point.

type Point {
  Point(Int, Int)
}

fn make_point(x: Int, y: Int) -> Point {
  Point(x, y)
}

fn point_equal(p1: Point, p2: Point) -> Bool {
  let Point(x1, y1) = p1
  let Point(x2, y2) = p2

  x1 == x2 && y1 == y2
}

fn point_to_string(point: Point) -> String {
  let Point(x, y) = point
  "(" <> int.to_string(x) <> " " <> int.to_string(y) <> ")"
}

Next, let’s write a function that parses the string representation into a Point. The string representation is pretty simple, Point(1, 2) would be represented by the following string: (1 2).

Here is one possible way to parse that string representation into a Point. (Note that this implementation is intentionally broken for illustration.)

fn point_of_string(string: String) -> Result(Point, String) {
  // Create the regex.
  use re <- result.try(
    regex.from_string("\\((\\d+) (\\d+)\\)")
    |> result.map_error(string.inspect),
  )

  // Ensure there is a single match.
  use submatches <- result.try(case regex.scan(re, string) {
    [Match(_content, submatches)] -> Ok(submatches)
    _ -> Error("expected a single match")
  })

  // Ensure both submatches are present.
  use xy <- result.try(case submatches {
    [Some(x), Some(y)] -> Ok(#(x, y))
    _ -> Error("expected two submatches")
  })

  // Try to parse both x and y values as integers.
  use xy <- result.try(case int.parse(xy.0), int.parse(xy.1) {
    Ok(x), Ok(y) -> Ok(#(x, y))
    Error(Nil), Ok(_) -> Error("failed to parse x value")
    Ok(_), Error(Nil) -> Error("failed to parse y value")
    Error(Nil), Error(Nil) -> Error("failed to parse x and y values")
  })

  Ok(Point(xy.0, xy.1))
}

Now we would like to test our implementation. Of course, we could make some examples and test it like so:

import gleeunit/should

pub fn roundtrip_test() {
  let point = Point(1, 2)
  let parsed_point = point |> point_to_string |> point_of_string

  point_equal(point, parsed_point) |> should.be_true
}

That’s fine, and you can imagine taking some corner cases like putting in 0 or -1 or the max and min values for integers on your selected target. Rather, let’s think of a property to test.

I mention round-tripping, but how can you write a property to test it. Something like, “given a valid point, when serializing it to a string, and then deserializing that string into another point, both points should always be equal”.

Okay, first we need to write a generator of valid points. In this case, it isn’t too interesting as any integer can be used for both x and y values of the point. So we can use generator.map2 like so:

fn point_generator() {
  qcheck.map2(make_point, qcheck.int_uniform(), qcheck.int_uniform())
}

Alternatively, if you prefer the use syntax, you could write:

fn point_generator() {
  use x, y <- qcheck.map2(g1: qcheck.int_uniform(), g2: qcheck.int_uniform())

  make_point(x, y)
}

Now that we have the point generator, we can write a property test.

pub fn point_serialization_roundtripping__test() {
  use generated_point <- qcheck.given(point_generator())

  let assert Ok(parsed_point) =
    generated_point
    |> point_to_string
    |> point_of_string

  point_equal(generated_point, parsed_point)
}

A couple things to note here.

Let’s try and run the test.

$ gleam test

  1) examples/parsing_example_test.point_serialization_roundtripping__test: module 'examples@parsing_example_test'
     Failure: <<"TestError[original_value: Point(-875333649, -1929681101); shrunk_value: Point(0, -1); shrink_steps: 31; error: Errored(dict.from_list([#(Function, \"point_serialization_roundtripping__test\"), #(Line, 74), #(Message, \"Assertion pattern match failed\"), #(Module, \"examples/parsing_example_test\"), #(Value, Error(\"expected a single match\")), #(GleamError, LetAssert)]));]">>
     stacktrace:
       qcheck_ffi.fail
     output:

There is a failure. Now, currently, this output is pretty noisy. Here are the important parts to highlight.

So we see a failure with Point(0, -1), which means it probably has something to do with the negative number. Also, we see that the Error("expected a single match") is what triggered the failure. That error comes about when regex.scan fails in the point_of_string function.

Given those two pieces of information, we can infer that the issue is in our regular expression definition: regex.from_string("\\((\\d+) (\\d+)\\)"). And now we may notice that we are not allowing for negative numbers in the regular expression. To fix it, change that line to the following:

    regex.from_string("\\((-?\\d+) (-?\\d+)\\)")

That is allowing an optional - sign in front of the integers. Now when you rerun the gleam test, everything passes.

You could imagine combining a property test like the one above, with a few well chosen examples to anchor everything, into a nice little test suite that exercises the serialization of points in a small amount of test code.

(The full code for this example can be found in test/examples/parsing_example_test.gleam.)

More examples

The test directory of this repository has many examples of setting up tests, using the built-in generators, and creating new generators. Until more dedicated documentation is written, the tests can provide some good info, as they exercise most of the available behavior. However, be aware that the tests will often use use <- qcheck.rescue. This is not needed in your tests–it provides a way to test the qcheck internals.

Integrating with testing frameworks

You don’t have to do anything special to integrate qcheck with a testing framework like gleeunit. The only thing required is that your testing framework of choice be able to handle panics/exceptions.

You may also be interested in qcheck_gleeunit_utils for running your tests in parallel and controlling test timeouts when using gleeunit and targeting Erlang.

Roadmap

While qcheck has a lot of features needed to get started with property-based testing, there are still things that could be added or improved. See the ROADMAP.md for more information.

Acknowledgements

Very heavily inspired by the qcheck and base_quickcheck OCaml packages, and of course, the Haskell libraries from which they take inspiration.

Contributing

Thank you for your interest in the project!

License

license MIT or Apache 2.0

Copyright (c) 2024 Ryan M. Moore

Licensed under the Apache License, Version 2.0 or the MIT license, at your option. This program may not be copied, modified, or distributed except according to those terms.

✨ Search Document