View Source Plug.Router (Plug v1.15.3)

A DSL to define a routing algorithm that works with Plug.

It provides a set of macros to generate routes. For example:

defmodule AppRouter do
  use Plug.Router

  plug :match
  plug :dispatch

  get "/hello" do
    send_resp(conn, 200, "world")
  end

  match _ do
    send_resp(conn, 404, "oops")
  end
end

Each route receives a conn variable containing a Plug.Conn struct and it needs to return a connection, as per the Plug spec. A catch-all match is recommended to be defined as in the example above, otherwise routing fails with a function clause error.

The router is itself a plug, which means it can be invoked as:

AppRouter.call(conn, AppRouter.init([]))

Each Plug.Router has a plug pipeline, defined by Plug.Builder, and by default it requires two plugs: :match and :dispatch. :match is responsible for finding a matching route which is then forwarded to :dispatch. This means users can easily hook into the router mechanism and add behaviour before match, before dispatch, or after both. See the Plug.Builder module for more information.

Routes

get "/hello" do
  send_resp(conn, 200, "world")
end

In the example above, a request will only match if it is a GET request and the route is "/hello". The supported HTTP methods are get, post, put, patch, delete and options.

A route can also specify parameters which will then be available in the function body:

get "/hello/:name" do
  send_resp(conn, 200, "hello #{name}")
end

This means the name can also be used in guards:

get "/hello/:name" when name in ~w(foo bar) do
  send_resp(conn, 200, "hello #{name}")
end

The :name parameter will also be available in the function body as conn.params["name"] and conn.path_params["name"].

The identifier always starts with : and must be followed by letters, numbers, and underscores, like any Elixir variable. It is possible for identifiers to be either prefixed or suffixed by other words. For example, you can include a suffix such as a dot delimited file extension:

get "/hello/:name.json" do
  send_resp(conn, 200, "hello #{name}")
end

The above will match /hello/foo.json but not /hello/foo. Other delimiters such as -, @ may be used to denote suffixes.

Routes allow for globbing which will match the remaining parts of a route. A glob match is done with the * character followed by the variable name. Typically you prefix the variable name with underscore to discard it:

get "/hello/*_rest" do
  send_resp(conn, 200, "matches all routes starting with /hello")
end

But you can also assign the glob to any variable. The contents will always be a list:

get "/hello/*glob" do
  send_resp(conn, 200, "route after /hello: #{inspect glob}")
end

Opposite to :identifiers, globs do not allow prefix nor suffix matches.

Finally, a general match function is also supported:

match "/hello" do
  send_resp(conn, 200, "world")
end

A match will match any route regardless of the HTTP method. Check match/3 for more information on how route compilation works and a list of supported options.

Parameter Parsing

Handling request data can be done through the Plug.Parsers plug. It provides support for parsing URL-encoded, form-data, and JSON data as well as providing a behaviour that others parsers can adopt.

Here is an example of Plug.Parsers can be used in a Plug.Router router to parse the JSON-encoded body of a POST request:

defmodule AppRouter do
  use Plug.Router

  plug :match

  plug Plug.Parsers,
       parsers: [:json],
       pass:  ["application/json"],
       json_decoder: Jason

  plug :dispatch

  post "/hello" do
    IO.inspect conn.body_params # Prints JSON POST body
    send_resp(conn, 200, "Success!")
  end
end

It is important that Plug.Parsers is placed before the :dispatch plug in the pipeline, otherwise the matched clause route will not receive the parsed body in its Plug.Conn argument when dispatched.

Plug.Parsers can also be plugged between :match and :dispatch (like in the example above): this means that Plug.Parsers will run only if there is a matching route. This can be useful to perform actions such as authentication before parsing the body, which should only be parsed if a route matches afterwards.

Error handling

In case something goes wrong in a request, the router by default will crash, without returning any response to the client. This behaviour can be configured in two ways, by using two different modules:

  • Plug.ErrorHandler - allows the developer to customize exactly which page is sent to the client via the handle_errors/2 function;

  • Plug.Debugger - automatically shows debugging and request information about the failure. This module is recommended to be used only in a development environment.

Here is an example of how both modules could be used in an application:

defmodule AppRouter do
  use Plug.Router

  if Mix.env == :dev do
    use Plug.Debugger
  end

  use Plug.ErrorHandler

  plug :match
  plug :dispatch

  get "/hello" do
    send_resp(conn, 200, "world")
  end

  defp handle_errors(conn, %{kind: _kind, reason: _reason, stack: _stack}) do
    send_resp(conn, conn.status, "Something went wrong")
  end
end

Passing data between routes and plugs

It is also possible to assign data to the Plug.Conn that will be available to any plug invoked after the :match plug. This is very useful if you want a matched route to customize how later plugs will behave.

You can use :assigns (which contains user data) or :private (which contains library/framework data) for this. For example:

get "/hello", assigns: %{an_option: :a_value} do
  send_resp(conn, 200, "world")
end

In the example above, conn.assigns[:an_option] will be available to all plugs invoked after :match. Such plugs can read from conn.assigns (or conn.private) to configure their behaviour based on the matched route.

use options

All of the options given to use Plug.Router are forwarded to Plug.Builder. See the Plug.Builder module for more information.

Telemetry

The router emits the following telemetry events:

  • [:plug, :router_dispatch, :start] - dispatched before dispatching to a matched route

    • Measurement: %{system_time: System.system_time}
    • Metadata: %{telemetry_span_context: term(), conn: Plug.Conn.t, route: binary, router: module}
  • [:plug, :router_dispatch, :exception] - dispatched after exceptions on dispatching a route

    • Measurement: %{duration: native_time}
    • Metadata: %{telemetry_span_context: term(), conn: Plug.Conn.t, route: binary, router: module, kind: :throw | :error | :exit, reason: term(), stacktrace: list()}

  • [:plug, :router_dispatch, :stop] - dispatched after successfully dispatching a matched route

    • Measurement: %{duration: native_time}
    • Metadata: %{telemetry_span_context: term(), conn: Plug.Conn.t, route: binary, router: module}

Summary

Functions

Dispatches to the path only if the request is a DELETE request. See match/3 for more examples.

Forwards requests to another Plug. The path_info of the forwarded connection will exclude the portion of the path specified in the call to forward. If the path contains any parameters, those will be available in the target Plug in conn.params and conn.path_params.

Dispatches to the path only if the request is a GET request. See match/3 for more examples.

Dispatches to the path only if the request is a HEAD request. See match/3 for more examples.

Main API to define routes.

Returns the path of the route that the request was matched to.

Dispatches to the path only if the request is an OPTIONS request. See match/3 for more examples.

Dispatches to the path only if the request is a PATCH request. See match/3 for more examples.

Dispatches to the path only if the request is a POST request. See match/3 for more examples.

Dispatches to the path only if the request is a PUT request. See match/3 for more examples.

Functions

Link to this macro

delete(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is a DELETE request. See match/3 for more examples.

Link to this macro

forward(path, options)

View Source (macro)

Forwards requests to another Plug. The path_info of the forwarded connection will exclude the portion of the path specified in the call to forward. If the path contains any parameters, those will be available in the target Plug in conn.params and conn.path_params.

Options

forward accepts the following options:

  • :to - a Plug the requests will be forwarded to.
  • :init_opts - the options for the target Plug. It is the preferred mechanism for passing options to the target Plug.
  • :host - a string representing the host or subdomain, exactly like in match/3.
  • :private - values for conn.private, exactly like in match/3.
  • :assigns - values for conn.assigns, exactly like in match/3.

If :init_opts is undefined, then all remaining options are passed to the target plug.

Examples

forward "/users", to: UserRouter

Assuming the above code, a request to /users/sign_in will be forwarded to the UserRouter plug, which will receive what it will see as a request to /sign_in.

forward "/foo/:bar/qux", to: FooPlug

Here, a request to /foo/BAZ/qux will be forwarded to the FooPlug plug, which will receive what it will see as a request to /, and conn.params["bar"] will be set to "BAZ".

Some other examples:

forward "/foo/bar", to: :foo_bar_plug, host: "foobar."
forward "/baz", to: BazPlug, init_opts: [plug_specific_option: true]
Link to this macro

get(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is a GET request. See match/3 for more examples.

Link to this macro

head(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is a HEAD request. See match/3 for more examples.

Link to this macro

match(path, options, contents \\ [])

View Source (macro)

Main API to define routes.

It accepts an expression representing the path and many options allowing the match to be configured.

The route can dispatch either to a function body or a Plug module.

Examples

match "/foo/bar", via: :get do
  send_resp(conn, 200, "hello world")
end

match "/baz", to: MyPlug, init_opts: [an_option: :a_value]

Options

match/3 and the other route macros accept the following options:

  • :host - the host which the route should match. Defaults to nil, meaning no host match, but can be a string like "example.com" or a string ending with ".", like "subdomain." for a subdomain match.

  • :private - assigns values to conn.private for use in the match

  • :assigns - assigns values to conn.assigns for use in the match

  • :via - matches the route against some specific HTTP method(s) specified as an atom, like :get or :put, or a list, like [:get, :post].

  • :do - contains the implementation to be invoked in case the route matches.

  • :to - a Plug that will be called in case the route matches.

  • :init_opts - the options for the target Plug given by :to.

A route should specify only one of :do or :to options.

@spec match_path(Plug.Conn.t()) :: String.t()

Returns the path of the route that the request was matched to.

Link to this macro

options(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is an OPTIONS request. See match/3 for more examples.

Link to this macro

patch(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is a PATCH request. See match/3 for more examples.

Link to this macro

post(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is a POST request. See match/3 for more examples.

Link to this macro

put(path, options, contents \\ [])

View Source (macro)

Dispatches to the path only if the request is a PUT request. See match/3 for more examples.