aws_direct_connect

AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. With this connection in place, you can create virtual interfaces directly to the AWS cloud (for example, to Amazon EC2 and Amazon S3) and to Amazon VPC, bypassing Internet service providers in your network path. A connection provides access to all AWS Regions except the China (Beijing) and (China) Ningxia Regions. AWS resources in the China Regions can only be accessed through locations associated with those Regions.

Summary

Functions

• accept_direct_connect_gateway_association_proposal(Client, Input)
  Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.
• accept_direct_connect_gateway_association_proposal(Client, Input, Options)
• allocate_connection_on_interconnect(Client, Input)
  Deprecated.
• allocate_connection_on_interconnect(Client, Input, Options)
• allocate_hosted_connection(Client, Input)
  Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.
• allocate_hosted_connection(Client, Input, Options)
• allocate_private_virtual_interface(Client, Input)
  Provisions a private virtual interface to be owned by the specified AWS account.
• allocate_private_virtual_interface(Client, Input, Options)
• allocate_public_virtual_interface(Client, Input)
  Provisions a public virtual interface to be owned by the specified AWS account.
• allocate_public_virtual_interface(Client, Input, Options)
• allocate_transit_virtual_interface(Client, Input)
  Provisions a transit virtual interface to be owned by the specified AWS account.
• allocate_transit_virtual_interface(Client, Input, Options)
• associate_connection_with_lag(Client, Input)
  Associates an existing connection with a link aggregation group (LAG).
• associate_connection_with_lag(Client, Input, Options)
• associate_hosted_connection(Client, Input)
  Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect.
• associate_hosted_connection(Client, Input, Options)
• associate_virtual_interface(Client, Input)
  Associates a virtual interface with a specified link aggregation group (LAG) or connection.
• associate_virtual_interface(Client, Input, Options)
• confirm_connection(Client, Input)
  Confirms the creation of the specified hosted connection on an interconnect.
• confirm_connection(Client, Input, Options)
• confirm_private_virtual_interface(Client, Input)
  Accepts ownership of a private virtual interface created by another AWS account.
• confirm_private_virtual_interface(Client, Input, Options)
• confirm_public_virtual_interface(Client, Input)
  Accepts ownership of a public virtual interface created by another AWS account.
• confirm_public_virtual_interface(Client, Input, Options)
• confirm_transit_virtual_interface(Client, Input)
  Accepts ownership of a transit virtual interface created by another AWS account.
• confirm_transit_virtual_interface(Client, Input, Options)
• create_bgp_peer(Client, Input)
  Creates a BGP peer on the specified virtual interface.
• create_bgp_peer(Client, Input, Options)
• create_connection(Client, Input)
  Creates a connection between a customer network and a specific AWS Direct Connect location.
• create_connection(Client, Input, Options)
• create_direct_connect_gateway(Client, Input)
  Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways.
• create_direct_connect_gateway(Client, Input, Options)
• create_direct_connect_gateway_association(Client, Input)
  Creates an association between a Direct Connect gateway and a virtual private gateway.
• create_direct_connect_gateway_association(Client, Input, Options)
• create_direct_connect_gateway_association_proposal(Client, Input)
  Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.
• create_direct_connect_gateway_association_proposal(Client, Input, Options)
• create_interconnect(Client, Input)
  Creates an interconnect between an AWS Direct Connect Partner's network and a specific AWS Direct Connect location.
• create_interconnect(Client, Input, Options)
• create_lag(Client, Input)
  Creates a link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location.
• create_lag(Client, Input, Options)
• create_private_virtual_interface(Client, Input)
  Creates a private virtual interface.
• create_private_virtual_interface(Client, Input, Options)
• create_public_virtual_interface(Client, Input)
  Creates a public virtual interface.
• create_public_virtual_interface(Client, Input, Options)
• create_transit_virtual_interface(Client, Input)
  Creates a transit virtual interface.
• create_transit_virtual_interface(Client, Input, Options)
• delete_bgp_peer(Client, Input)
  Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.
• delete_bgp_peer(Client, Input, Options)
• delete_connection(Client, Input)
  Deletes the specified connection.
• delete_connection(Client, Input, Options)
• delete_direct_connect_gateway(Client, Input)
  Deletes the specified Direct Connect gateway.
• delete_direct_connect_gateway(Client, Input, Options)
• delete_direct_connect_gateway_association(Client, Input)
  Deletes the association between the specified Direct Connect gateway and virtual private gateway.
• delete_direct_connect_gateway_association(Client, Input, Options)
• delete_direct_connect_gateway_association_proposal(Client, Input)
  Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.
• delete_direct_connect_gateway_association_proposal(Client, Input, Options)
• delete_interconnect(Client, Input)
  Deletes the specified interconnect.
• delete_interconnect(Client, Input, Options)
• delete_lag(Client, Input)
  Deletes the specified link aggregation group (LAG).
• delete_lag(Client, Input, Options)
• delete_virtual_interface(Client, Input)
  Deletes a virtual interface.
• delete_virtual_interface(Client, Input, Options)
• describe_connection_loa(Client, Input)
  Deprecated.
• describe_connection_loa(Client, Input, Options)
• describe_connections(Client, Input)
  Displays the specified connection or all connections in this Region.
• describe_connections(Client, Input, Options)
• describe_connections_on_interconnect(Client, Input)
  Deprecated.
• describe_connections_on_interconnect(Client, Input, Options)
• describe_direct_connect_gateway_association_proposals(Client, Input)
  Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.
• describe_direct_connect_gateway_association_proposals(Client, Input, Options)
• describe_direct_connect_gateway_associations(Client, Input)
  Lists the associations between your Direct Connect gateways and virtual private gateways.
• describe_direct_connect_gateway_associations(Client, Input, Options)
• describe_direct_connect_gateway_attachments(Client, Input)
  Lists the attachments between your Direct Connect gateways and virtual interfaces.
• describe_direct_connect_gateway_attachments(Client, Input, Options)
• describe_direct_connect_gateways(Client, Input)
  Lists all your Direct Connect gateways or only the specified Direct Connect gateway.
• describe_direct_connect_gateways(Client, Input, Options)
• describe_hosted_connections(Client, Input)
  Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).
• describe_hosted_connections(Client, Input, Options)
• describe_interconnect_loa(Client, Input)
  Deprecated.
• describe_interconnect_loa(Client, Input, Options)
• describe_interconnects(Client, Input)
  Lists the interconnects owned by the AWS account or only the specified interconnect.
• describe_interconnects(Client, Input, Options)
• describe_lags(Client, Input)
  Describes all your link aggregation groups (LAG) or the specified LAG.
• describe_lags(Client, Input, Options)
• describe_loa(Client, Input)
  Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
• describe_loa(Client, Input, Options)
• describe_locations(Client, Input)
  Lists the AWS Direct Connect locations in the current AWS Region.
• describe_locations(Client, Input, Options)
• describe_tags(Client, Input)
  Describes the tags associated with the specified AWS Direct Connect resources.
• describe_tags(Client, Input, Options)
• describe_virtual_gateways(Client, Input)
  Lists the virtual private gateways owned by the AWS account.
• describe_virtual_gateways(Client, Input, Options)
• describe_virtual_interfaces(Client, Input)
  Displays all virtual interfaces for an AWS account.
• describe_virtual_interfaces(Client, Input, Options)
• disassociate_connection_from_lag(Client, Input)
  Disassociates a connection from a link aggregation group (LAG).
• disassociate_connection_from_lag(Client, Input, Options)
• list_virtual_interface_test_history(Client, Input)
  Lists the virtual interface failover test history.
• list_virtual_interface_test_history(Client, Input, Options)
• start_bgp_failover_test(Client, Input)
  Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state.
• start_bgp_failover_test(Client, Input, Options)
• stop_bgp_failover_test(Client, Input)
  Stops the virtual interface failover test.
• stop_bgp_failover_test(Client, Input, Options)
• tag_resource(Client, Input)
  Adds the specified tags to the specified AWS Direct Connect resource.
• tag_resource(Client, Input, Options)
• untag_resource(Client, Input)
  Removes one or more tags from the specified AWS Direct Connect resource.
• untag_resource(Client, Input, Options)
• update_direct_connect_gateway_association(Client, Input)
  Updates the specified attributes of the Direct Connect gateway association.
• update_direct_connect_gateway_association(Client, Input, Options)
• update_lag(Client, Input)
  Updates the attributes of the specified link aggregation group (LAG).
• update_lag(Client, Input, Options)
• update_virtual_interface_attributes(Client, Input)
  Updates the specified attributes of the specified virtual private interface.
• update_virtual_interface_attributes(Client, Input, Options)

Functions

Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.

Deprecated. Use AllocateHostedConnection instead.

Creates a hosted connection on an interconnect.

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the specified interconnect.

Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.

Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. AWS polices the hosted connection for the specified capacity and the AWS Direct Connect Partner must also police the hosted connection for the specified capacity.

Provisions a private virtual interface to be owned by the specified AWS account.

Provisions a public virtual interface to be owned by the specified AWS account.

The owner of a connection calls this function to provision a public virtual interface to be owned by the specified AWS account.

Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the confirming state and is not available to handle traffic.

Provisions a transit virtual interface to be owned by the specified AWS account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.

The owner of a connection provisions a transit virtual interface to be owned by the specified AWS account.

Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS is interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that's currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.

Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being migrated.

Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to AWS is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.

Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.

Confirms the creation of the specified hosted connection on an interconnect.

Accepts ownership of a private virtual interface created by another AWS account.

Accepts ownership of a public virtual interface created by another AWS account.

Accepts ownership of a transit virtual interface created by another AWS account.

Creates a BGP peer on the specified virtual interface.

You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access AWS resources that also use that address family.

If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.

When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.

Creates a connection between a customer network and a specific AWS Direct Connect location.

A connection links your internal network to an AWS Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router.

To find the locations for your Region, use DescribeLocations.

Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any AWS Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different AWS Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.

Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.

Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.

Creates an interconnect between an AWS Direct Connect Partner's network and a specific AWS Direct Connect location.

An interconnect is a connection that is capable of hosting other connections. The AWS Direct Connect partner can use an interconnect to provide AWS Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner's network to an AWS Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an AWS Direct Connect router.

You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.

For each end customer, the AWS Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to AWS resources by creating a virtual interface on their connection, using the VLAN assigned to them by the AWS Direct Connect Partner.

Creates a link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.

All connections in a LAG must use the same bandwidth and must terminate at the same AWS Direct Connect endpoint.

You can have up to 10 connections per LAG. Regardless of this limit, if you request more connections for the LAG than AWS Direct Connect can allocate on a single endpoint, no LAG is created.

You can specify an existing physical connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical connection or hosted connections, and re-establishes them as a member of the LAG. The LAG will be created on the same AWS Direct Connect endpoint to which the connection terminates. Any virtual interfaces associated with the connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.

Creates a private virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different AWS Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.

Creates a public virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A public virtual interface supports sending traffic to public services of AWS such as Amazon S3.

Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.

Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.

Deletes the specified connection.

Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.

Deletes the association between the specified Direct Connect gateway and virtual private gateway.

Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.

Deletes the specified interconnect.

Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.

Deletes a virtual interface.

Deprecated. Use DescribeLoa instead.

Gets the LOA-CFA for a connection.

Displays the specified connection or all connections in this Region.

Deprecated. Use DescribeHostedConnections instead.

Lists the connections that have been provisioned on the specified interconnect.

Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.

Lists the associations between your Direct Connect gateways and virtual private gateways. You must specify a Direct Connect gateway, a virtual private gateway, or both. If you specify a Direct Connect gateway, the response contains all virtual private gateways associated with the Direct Connect gateway. If you specify a virtual private gateway, the response contains all Direct Connect gateways associated with the virtual private gateway. If you specify both, the response contains the association between the Direct Connect gateway and the virtual private gateway.

Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.

Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.

Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).

Deprecated. Use DescribeLoa instead.

Gets the LOA-CFA for the specified interconnect.

Lists the interconnects owned by the AWS account or only the specified interconnect.

Describes all your link aggregation groups (LAG) or the specified LAG.

Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).

Lists the AWS Direct Connect locations in the current AWS Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.

Describes the tags associated with the specified AWS Direct Connect resources.

Lists the virtual private gateways owned by the AWS account.

Displays all virtual interfaces for an AWS account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.

Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect Partner is automatically converted to an interconnect.

Lists the virtual interface failover test history.

Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state. You can then send traffic to verify that there are no outages.

You can run the test on public, private, transit, and hosted virtual interfaces.

You can use ListVirtualInterfaceTestHistory to view the virtual interface test history.

Stops the virtual interface failover test.

Adds the specified tags to the specified AWS Direct Connect resource. Each resource can have a maximum of 50 tags.

Removes one or more tags from the specified AWS Direct Connect resource.

Updates the specified attributes of the Direct Connect gateway association.

Updates the attributes of the specified link aggregation group (LAG).

You can update the following attributes:

• The name of the LAG.

• The value for the minimum number of connections that must be operational for the LAG itself to be operational.

Updates the specified attributes of the specified virtual private interface.