View Source DynamicSupervisor behaviour (Elixir v1.13.4)

A supervisor that starts children dynamically.

The Supervisor module was designed to handle mostly static children that are started in the given order when the supervisor starts. A DynamicSupervisor starts with no children. Instead, children are started on demand via start_child/2. When a dynamic supervisor terminates, all children are shut down at the same time, with no guarantee of ordering.

Examples

A dynamic supervisor is started with no children, a supervision strategy (the only strategy currently supported is :one_for_one), and a name:

children = [
  {DynamicSupervisor, strategy: :one_for_one, name: MyApp.DynamicSupervisor}
]

Supervisor.start_link(children, strategy: :one_for_one)

The options given in the child specification are documented in start_link/1.

Once the dynamic supervisor is running, we can start children with start_child/2, which receives a child specification:

{:ok, agent1} = DynamicSupervisor.start_child(MyApp.DynamicSupervisor, {Agent, fn -> %{} end})
Agent.update(agent1, &Map.put(&1, :key, "value"))
Agent.get(agent1, & &1)
#=> %{key: "value"}

{:ok, agent2} = DynamicSupervisor.start_child(MyApp.DynamicSupervisor, {Agent, fn -> %{} end})
Agent.get(agent2, & &1)
#=> %{}

DynamicSupervisor.count_children(MyApp.DynamicSupervisor)
#=> %{active: 2, specs: 2, supervisors: 0, workers: 2}

Module-based supervisors

Similar to Supervisor, dynamic supervisors also support module-based supervisors.

defmodule MyApp.DynamicSupervisor do
  # Automatically defines child_spec/1
  use DynamicSupervisor

  def start_link(init_arg) do
    DynamicSupervisor.start_link(__MODULE__, init_arg, name: __MODULE__)
  end

  @impl true
  def init(_init_arg) do
    DynamicSupervisor.init(strategy: :one_for_one)
  end
end

See the Supervisor docs for a discussion of when you may want to use module-based supervisors. A @doc annotation immediately preceding use DynamicSupervisor will be attached to the generated child_spec/1 function.

Name registration

A supervisor is bound to the same name registration rules as a GenServer. Read more about these rules in the documentation for GenServer.

Migrating from Supervisor's :simple_one_for_one

In case you were using the deprecated :simple_one_for_one strategy from the Supervisor module, you can migrate to the DynamicSupervisor in few steps.

Imagine the given "old" code:

defmodule MySupervisor do
  use Supervisor

  def start_link(init_arg) do
    Supervisor.start_link(__MODULE__, init_arg, name: __MODULE__)
  end

  def start_child(foo, bar, baz) do
    # This will start child by calling MyWorker.start_link(init_arg, foo, bar, baz)
    Supervisor.start_child(__MODULE__, [foo, bar, baz])
  end

  @impl true
  def init(init_arg) do
    children = [
      # Or the deprecated: worker(MyWorker, [init_arg])
      %{id: MyWorker, start: {MyWorker, :start_link, [init_arg]}}
    ]

    Supervisor.init(children, strategy: :simple_one_for_one)
  end
end

It can be upgraded to the DynamicSupervisor like this:

defmodule MySupervisor do
  use DynamicSupervisor

  def start_link(init_arg) do
    DynamicSupervisor.start_link(__MODULE__, init_arg, name: __MODULE__)
  end

  def start_child(foo, bar, baz) do
    # If MyWorker is not using the new child specs, we need to pass a map:
    # spec = %{id: MyWorker, start: {MyWorker, :start_link, [foo, bar, baz]}}
    spec = {MyWorker, foo: foo, bar: bar, baz: baz}
    DynamicSupervisor.start_child(__MODULE__, spec)
  end

  @impl true
  def init(init_arg) do
    DynamicSupervisor.init(
      strategy: :one_for_one,
      extra_arguments: [init_arg]
    )
  end
end

The difference is that the DynamicSupervisor expects the child specification at the moment start_child/2 is called, and no longer on the init callback. If there are any initial arguments given on initialization, such as [initial_arg], it can be given in the :extra_arguments flag on DynamicSupervisor.init/1.

Link to this section Summary

Types

Options given to start_link and init/1 functions

Return values of start_child functions

Options given to start_link functions

Supported strategies

The supervisor flags returned on init

Callbacks

Callback invoked to start the supervisor and during hot code upgrades.

Functions

Returns a specification to start a dynamic supervisor under a supervisor.

Returns a map containing count values for the supervisor.

Receives a set of options that initializes a dynamic supervisor.

Dynamically adds a child specification to supervisor and starts that child.

Starts a supervisor with the given options.

Starts a module-based supervisor process with the given module and arg.

Synchronously stops the given supervisor with the given reason.

Terminates the given child identified by pid.

Returns a list with information about all children.

Link to this section Types

@type init_option() ::
  {:strategy, strategy()}
  | {:max_restarts, non_neg_integer()}
  | {:max_seconds, pos_integer()}
  | {:max_children, non_neg_integer() | :infinity}
  | {:extra_arguments, [term()]}

Options given to start_link and init/1 functions

@type on_start_child() ::
  {:ok, pid()}
  | {:ok, pid(), info :: term()}
  | :ignore
  | {:error, {:already_started, pid()} | :max_children | term()}

Return values of start_child functions

@type option() :: GenServer.option()

Options given to start_link functions

@type strategy() :: :one_for_one

Supported strategies

@type sup_flags() :: %{
  strategy: strategy(),
  intensity: non_neg_integer(),
  period: pos_integer(),
  max_children: non_neg_integer() | :infinity,
  extra_arguments: [term()]
}

The supervisor flags returned on init

Link to this section Callbacks

@callback init(init_arg :: term()) :: {:ok, sup_flags()} | :ignore

Callback invoked to start the supervisor and during hot code upgrades.

Developers typically invoke DynamicSupervisor.init/1 at the end of their init callback to return the proper supervision flags.

Link to this section Functions

Link to this function

child_spec(opts)

View Source (since 1.6.1)

Returns a specification to start a dynamic supervisor under a supervisor.

See Supervisor.

Link to this function

count_children(supervisor)

View Source (since 1.6.0)
@spec count_children(Supervisor.supervisor()) :: %{
  specs: non_neg_integer(),
  active: non_neg_integer(),
  supervisors: non_neg_integer(),
  workers: non_neg_integer()
}

Returns a map containing count values for the supervisor.

The map contains the following keys:

  • :specs - the number of children processes

  • :active - the count of all actively running child processes managed by this supervisor

  • :supervisors - the count of all supervisors whether or not the child process is still alive

  • :workers - the count of all workers, whether or not the child process is still alive

Link to this function

init(options)

View Source (since 1.6.0)
@spec init([init_option()]) :: {:ok, sup_flags()}

Receives a set of options that initializes a dynamic supervisor.

This is typically invoked at the end of the init/1 callback of module-based supervisors. See the "Module-based supervisors" section in the module documentation for more information.

The options received by this function are also supported by start_link/1.

This function returns a tuple containing the supervisor options.

Examples

def init(_arg) do
  DynamicSupervisor.init(max_children: 1000, strategy: :one_for_one)
end

Options

  • :strategy - the restart strategy option. The only supported value is :one_for_one which means that no other child is terminated if a child process terminates. You can learn more about strategies in the Supervisor module docs.

  • :max_restarts - the maximum number of restarts allowed in a time frame. Defaults to 3.

  • :max_seconds - the time frame in which :max_restarts applies. Defaults to 5.

  • :max_children - the maximum amount of children to be running under this supervisor at the same time. When :max_children is exceeded, start_child/2 returns {:error, :max_children}. Defaults to :infinity.

  • :extra_arguments - arguments that are prepended to the arguments specified in the child spec given to start_child/2. Defaults to an empty list.

Link to this function

start_child(supervisor, child_spec)

View Source (since 1.6.0)
@spec start_child(
  Supervisor.supervisor(),
  Supervisor.child_spec()
  | {module(), term()}
  | module()
  | (old_erlang_child_spec :: :supervisor.child_spec())
) :: on_start_child()

Dynamically adds a child specification to supervisor and starts that child.

child_spec should be a valid child specification as detailed in the "Child specification" section of the documentation for Supervisor. The child process will be started as defined in the child specification.

If the child process start function returns {:ok, child} or {:ok, child, info}, then child specification and PID are added to the supervisor and this function returns the same value.

If the child process start function returns :ignore, then no child is added to the supervision tree and this function returns :ignore too.

If the child process start function returns an error tuple or an erroneous value, or if it fails, the child specification is discarded and this function returns {:error, error} where error is the error or erroneous value returned from child process start function, or failure reason if it fails.

If the supervisor already has N children in a way that N exceeds the amount of :max_children set on the supervisor initialization (see init/1), then this function returns {:error, :max_children}.

Link to this function

start_link(options)

View Source (since 1.6.0)
@spec start_link([option() | init_option()]) :: Supervisor.on_start()

Starts a supervisor with the given options.

The :strategy is a required option and the currently supported value is :one_for_one. The remaining options can be found in the init/1 docs.

The :name option can also be used to register a supervisor name. The supported values are described under the "Name registration" section in the GenServer module docs.

If the supervisor is successfully spawned, this function returns {:ok, pid}, where pid is the PID of the supervisor. If the supervisor is given a name and a process with the specified name already exists, the function returns {:error, {:already_started, pid}}, where pid is the PID of that process.

Note that a supervisor started with this function is linked to the parent process and exits not only on crashes but also if the parent process exits with :normal reason.

Link to this function

start_link(mod, init_arg, opts \\ [])

View Source (since 1.6.0)
@spec start_link(module(), term(), [option()]) :: Supervisor.on_start()

Starts a module-based supervisor process with the given module and arg.

To start the supervisor, the init/1 callback will be invoked in the given module, with arg as its argument. The init/1 callback must return a supervisor specification which can be created with the help of the init/1 function.

If the init/1 callback returns :ignore, this function returns :ignore as well and the supervisor terminates with reason :normal. If it fails or returns an incorrect value, this function returns {:error, term} where term is a term with information about the error, and the supervisor terminates with reason term.

The :name option can also be given in order to register a supervisor name, the supported values are described in the "Name registration" section in the GenServer module docs.

Link to this function

stop(supervisor, reason \\ :normal, timeout \\ :infinity)

View Source (since 1.7.0)
@spec stop(Supervisor.supervisor(), reason :: term(), timeout()) :: :ok

Synchronously stops the given supervisor with the given reason.

It returns :ok if the supervisor terminates with the given reason. If it terminates with another reason, the call exits.

This function keeps OTP semantics regarding error reporting. If the reason is any other than :normal, :shutdown or {:shutdown, _}, an error report is logged.

Link to this function

terminate_child(supervisor, pid)

View Source (since 1.6.0)
@spec terminate_child(Supervisor.supervisor(), pid()) :: :ok | {:error, :not_found}

Terminates the given child identified by pid.

If successful, this function returns :ok. If there is no process with the given PID, this function returns {:error, :not_found}.

Link to this function

which_children(supervisor)

View Source (since 1.6.0)
@spec which_children(Supervisor.supervisor()) :: [
  {:undefined, pid() | :restarting, :worker | :supervisor,
   [module()] | :dynamic}
]

Returns a list with information about all children.

Note that calling this function when supervising a large number of children under low memory conditions can cause an out of memory exception.

This function returns a list of tuples containing:

  • id - it is always :undefined for dynamic supervisors

  • child - the PID of the corresponding child process or the atom :restarting if the process is about to be restarted

  • type - :worker or :supervisor as defined in the child specification

  • modules - as defined in the child specification