View Source Module behaviour (Elixir v1.17.0-rc.0)

Provides functions to deal with modules during compilation time.

It allows a developer to dynamically add, delete and register attributes, attach documentation and so forth.

After a module is compiled, using many of the functions in this module will raise errors, since it is out of their scope to inspect runtime data. Most of the runtime data can be inspected via the __info__/1 function attached to each compiled module.

Module attributes

Each module can be decorated with one or more attributes. The following ones are currently defined by Elixir:

@after_compile

A hook that will be invoked right after the current module is compiled. Accepts a module or a {module, function_name}. See the "Compile callbacks" section below.

@after_verify (since v1.14.0)

A hook that will be invoked right after the current module is verified for undefined functions, deprecations, etc. Accepts a module or a {module, function_name}. See the "Compile callbacks" section below.

@before_compile

A hook that will be invoked before the module is compiled. Accepts a module or a {module, function_or_macro_name} tuple. See the "Compile callbacks" section below.

@behaviour

Note the British spelling!

Behaviours can be referenced by modules to ensure they implement required specific function signatures defined by @callback.

For example, you could specify a URI.Parser behaviour as follows:

defmodule URI.Parser do
  @doc "Defines a default port"
  @callback default_port() :: integer

  @doc "Parses the given URL"
  @callback parse(uri_info :: URI.t()) :: URI.t()
end

And then a module may use it as:

defmodule URI.HTTP do
  @behaviour URI.Parser
  def default_port(), do: 80
  def parse(info), do: info
end

If the behaviour changes or URI.HTTP does not implement one of the callbacks, a warning will be raised.

For detailed documentation, see the behaviour typespec documentation.

@impl (since v1.5.0)

To aid in the correct implementation of behaviours, you may optionally declare @impl for implemented callbacks of a behaviour. This makes callbacks explicit and can help you to catch errors in your code. The compiler will warn in these cases:

  • if you mark a function with @impl when that function is not a callback.

  • if you don't mark a function with @impl when other functions are marked with @impl. If you mark one function with @impl, you must mark all other callbacks for that behaviour as @impl.

@impl works on a per-context basis. If you generate a function through a macro and mark it with @impl, that won't affect the module where that function is generated in.

@impl also helps with maintainability by making it clear to other developers that the function is implementing a callback.

Using @impl, the example above can be rewritten as:

defmodule URI.HTTP do
  @behaviour URI.Parser

  @impl true
  def default_port(), do: 80

  @impl true
  def parse(info), do: info
end

You may pass either false, true, or a specific behaviour to @impl.

defmodule Foo do
  @behaviour Bar
  @behaviour Baz

  # Will warn if neither Bar nor Baz specify a callback named bar/0.
  @impl true
  def bar(), do: :ok

  # Will warn if Baz does not specify a callback named baz/0.
  @impl Baz
  def baz(), do: :ok
end

The code is now more readable, as it is now clear which functions are part of your API and which ones are callback implementations. To reinforce this idea, @impl true automatically marks the function as @doc false, disabling documentation unless @doc is explicitly set.

@compile

Defines options for module compilation. This is used to configure both Elixir and Erlang compilers, as any other compilation pass added by external tools. For example:

defmodule MyModule do
  @compile {:inline, my_fun: 1}

  def my_fun(arg) do
    to_string(arg)
  end
end

Multiple uses of @compile will accumulate instead of overriding previous ones. See the "Compile options" section below.

@deprecated (since v1.6.0)

Provides the deprecation reason for a function. For example:

defmodule Keyword do
  @deprecated "Use Kernel.length/1 instead"
  def size(keyword) do
    length(keyword)
  end
end

The Mix compiler automatically looks for calls to deprecated modules and emit warnings during compilation.

Using the @deprecated attribute will also be reflected in the documentation of the given function and macro. You can choose between the @deprecated attribute and the documentation metadata to provide hard-deprecations (with warnings) and soft-deprecations (without warnings):

This is a soft-deprecation as it simply annotates the documentation as deprecated:

@doc deprecated: "Use Kernel.length/1 instead"
def size(keyword)

This is a hard-deprecation as it emits warnings and annotates the documentation as deprecated:

@deprecated "Use Kernel.length/1 instead"
def size(keyword)

Currently @deprecated only supports functions and macros. However you can use the :deprecated key in the annotation metadata to annotate the docs of modules, types and callbacks too.

We recommend using this feature with care, especially library authors. Deprecating code always pushes the burden towards library users. We also recommend for deprecated functionality to be maintained for long periods of time, even after deprecation, giving developers plenty of time to update (except for cases where keeping the deprecated API is undesired, such as in the presence of security issues).

@doc and @typedoc

Provides documentation for the entity that follows the attribute. @doc is to be used with a function, macro, callback, or macrocallback, while @typedoc with a type (public or opaque).

Accepts one of these:

  • a string (often a heredoc)
  • false, which will make the entity invisible to documentation-extraction tools like ExDoc
  • a keyword list, since Elixir 1.7.0

For example:

defmodule MyModule do
  @typedoc "This type"
  @typedoc since: "1.1.0"
  @type t :: term

  @doc "Hello world"
  @doc since: "1.1.0"
  def hello do
    "world"
  end

  @doc """
  Sums `a` to `b`.
  """
  def sum(a, b) do
    a + b
  end
end

As can be seen in the example above, since Elixir 1.7.0 @doc and @typedoc also accept a keyword list that serves as a way to provide arbitrary metadata about the entity. Tools like ExDoc and IEx may use this information to display annotations. A common use case is the :since key, which may be used to annotate in which version the function was introduced.

As illustrated in the example, it is possible to use these attributes more than once before an entity. However, the compiler will warn if used twice with binaries as that replaces the documentation text from the preceding use. Multiple uses with keyword lists will merge the lists into one.

Note that since the compiler also defines some additional metadata, there are a few reserved keys that will be ignored and warned if used. Currently these are: :opaque and :defaults.

Once this module is compiled, this information becomes available via the Code.fetch_docs/1 function.

@dialyzer

Defines warnings to request or suppress when using :dialyzer.

Accepts an atom, a tuple, or a list of atoms and tuples. For example:

defmodule MyModule do
  @dialyzer {:nowarn_function, [my_fun: 1]}

  def my_fun(arg) do
    M.not_a_function(arg)
  end
end

For the list of supported warnings, see :dialyzer module.

Multiple uses of @dialyzer will accumulate instead of overriding previous ones.

@external_resource

Specifies an external resource for the current module.

Sometimes a module embeds information from an external file. This attribute allows the module to annotate which external resources have been used.

Tools may use this information to ensure the module is recompiled in case any of the external resources change, see for example: mix compile.elixir.

The specified file path provided is interpreted as relative to the folder containing the project's mix.exs, which is the current working directory, not the file where @external_resource is declared.

If the external resource does not exist, the module still has a dependency on it, causing the module to be recompiled as soon as the file is added.

@file

Changes the filename used in stacktraces for the function or macro that follows the attribute, such as:

defmodule MyModule do
  @doc "Hello world"
  @file "hello.ex"
  def hello do
    "world"
  end
end

Note that this is only valid for exceptions/diagnostics that come from the definition inner scope (which includes its patterns and guards). For example:

defmodule MyModule do # <---- module definition
  @file "hello.ex"
  defp unused(a) do # <---- function definition
    "world" # <---- function scope
  end

  @file "bye.ex"
  def unused(_), do: true
end

If you run this code with the second "unused" definition commented, you will see that hello.ex is used as the stacktrace when reporting warnings, but if you uncomment it you'll see that the error will not mention bye.ex, because it's a module-level error rather than an expression-level error.

@moduledoc

Provides documentation for the current module.

defmodule MyModule do
  @moduledoc """
  A very useful module.
  """
  @moduledoc authors: ["Alice", "Bob"]
end

Accepts a string (often a heredoc) or false where @moduledoc false will make the module invisible to documentation extraction tools like ExDoc.

Similarly to @doc also accepts a keyword list to provide metadata about the module. For more details, see the documentation of @doc above.

Once this module is compiled, this information becomes available via the Code.fetch_docs/1 function.

@nifs (since v1.16.0)

A list of functions and their arities which will be overridden by a native implementation (NIF).

defmodule MyLibrary.MyModule do
  @nifs [foo: 1, bar: 2]

  def foo(arg1), do: :erlang.nif_error(:not_loaded)
  def bar(arg1, arg2), do: :erlang.nif_error(:not_loaded)
end

See the Erlang documentation for more information: https://www.erlang.org/doc/man/erl_nif

@on_definition

A hook that will be invoked when each function or macro in the current module is defined. Useful when annotating functions.

Accepts a module or a {module, function_name} tuple. The function must take 6 arguments:

  • the module environment
  • the kind of the function/macro: :def, :defp, :defmacro, or :defmacrop
  • the function/macro name
  • the list of quoted arguments
  • the list of quoted guards
  • the quoted function body

If the function/macro being defined has multiple clauses, the hook will be called for each clause.

Unlike other hooks, @on_definition will only invoke functions and never macros. This is to avoid @on_definition callbacks from redefining functions that have just been defined in favor of more explicit approaches.

When just a module is provided, the function is assumed to be __on_definition__/6.

Example

defmodule Hooks do
  def on_def(_env, kind, name, args, guards, body) do
    IO.puts("Defining #{kind} named #{name} with args:")
    IO.inspect(args)
    IO.puts("and guards")
    IO.inspect(guards)
    IO.puts("and body")
    IO.puts(Macro.to_string(body))
  end
end

defmodule MyModule do
  @on_definition {Hooks, :on_def}

  def hello(arg) when is_binary(arg) or is_list(arg) do
    "Hello" <> to_string(arg)
  end

  def hello(_) do
    :ok
  end
end

@on_load

A hook that will be invoked whenever the module is loaded.

Accepts the function name (as an atom) of a function in the current module. The function must have an arity of 0 (no arguments). If the function does not return :ok, the loading of the module will be aborted. For example:

defmodule MyModule do
  @on_load :load_check

  def load_check do
    if some_condition() do
      :ok
    else
      :abort
    end
  end

  def some_condition do
    false
  end
end

@vsn

Specify the module version. Accepts any valid Elixir value, for example:

defmodule MyModule do
  @vsn "1.0"
end

Struct attributes

  • @derive - derives an implementation for the given protocol for the struct defined in the current module

  • @enforce_keys - ensures the given keys are always set when building the struct defined in the current module

See defstruct/1 for more information on building and using structs.

Typespec attributes

The following attributes are part of typespecs and are also built-in in Elixir:

  • @type - defines a type to be used in @spec
  • @typep - defines a private type to be used in @spec
  • @opaque - defines an opaque type to be used in @spec
  • @spec - provides a specification for a function
  • @callback - provides a specification for a behaviour callback
  • @macrocallback - provides a specification for a macro behaviour callback
  • @optional_callbacks - specifies which behaviour callbacks and macro behaviour callbacks are optional
  • @impl - declares an implementation of a callback function or macro

For detailed documentation, see the typespec documentation.

Custom attributes

In addition to the built-in attributes outlined above, custom attributes may also be added. Custom attributes are expressed using the @/1 operator followed by a valid variable name. The value given to the custom attribute must be a valid Elixir value:

defmodule MyModule do
  @custom_attr [some: "stuff"]
end

For more advanced options available when defining custom attributes, see register_attribute/3.

Compile callbacks

There are three compilation callbacks, invoked in this order: @before_compile, @after_compile, and @after_verify. They are described next.

@before_compile

A hook that will be invoked before the module is compiled. This is often used to change how the current module is being compiled.

Accepts a module or a {module, function_or_macro_name} tuple. The function/macro must take one argument: the module environment. If it's a macro, its returned value will be injected at the end of the module definition before the compilation starts.

When just a module is provided, the function/macro is assumed to be __before_compile__/1.

Callbacks will run in the order they are registered. Any overridable definition will be made concrete before the first callback runs. A definition may be made overridable again in another before compile callback and it will be made concrete one last time after all callbacks run.

Note: the callback function/macro must be placed in a separate module (because when the callback is invoked, the current module does not yet exist).

Example

defmodule A do
  defmacro __before_compile__(_env) do
    quote do
      def hello, do: "world"
    end
  end
end

defmodule B do
  @before_compile A
end

B.hello()
#=> "world"

@after_compile

A hook that will be invoked right after the current module is compiled.

Accepts a module or a {module, function_name} tuple. The function must take two arguments: the module environment and its bytecode. When just a module is provided, the function is assumed to be __after_compile__/2.

Callbacks will run in the order they are registered.

Module functions expecting not yet compiled modules (such as definitions_in/1) are still available at the time @after_compile is invoked.

Example

defmodule MyModule do
  @after_compile __MODULE__

  def __after_compile__(env, _bytecode) do
    IO.inspect(env)
  end
end

@after_verify

A hook that will be invoked right after the current module is verified for undefined functions, deprecations, etc. A module is always verified after it is compiled. In Mix projects, a module is also verified when any of its runtime dependencies change. Therefore this is useful to perform verification of the current module while avoiding compile-time dependencies. Given the callback is invoked under different scenarios, Elixir provides no guarantees of when in the compilation cycle nor in which process the callback runs.

Accepts a module or a {module, function_name} tuple. The function must take one argument: the module name. When just a module is provided, the function is assumed to be __after_verify__/1.

Callbacks will run in the order they are registered.

Module functions expecting not yet compiled modules are no longer available at the time @after_verify is invoked.

Example

defmodule MyModule do
  @after_verify __MODULE__

  def __after_verify__(module) do
    IO.inspect(module)
    :ok
  end
end

Compile options

The @compile attribute accepts different options that are used by both Elixir and Erlang compilers. Some of the common use cases are documented below:

  • @compile :debug_info - includes :debug_info regardless of the corresponding setting in Code.get_compiler_option/1

  • @compile {:debug_info, false} - disables :debug_info regardless of the corresponding setting in Code.get_compiler_option/1. Note disabling :debug_info is not recommended as it removes the ability of the Elixir compiler and other tools to static analyse the code. If you want to remove the :debug_info while deploying, tools like mix release already do such by default.

  • @compile {:inline, some_fun: 2, other_fun: 3} - inlines the given name/arity pairs. Inlining is applied locally, calls from another module are not affected by this option

  • @compile {:autoload, false} - disables automatic loading of modules after compilation. Instead, the module will be loaded after it is dispatched to

  • @compile {:no_warn_undefined, Mod} or @compile {:no_warn_undefined, {Mod, fun, arity}} - does not warn if the given module or the given Mod.fun/arity are not defined

Summary

Callbacks

Provides runtime information about functions, macros, and other information defined by the module.

Functions

Returns all module attributes names defined in module.

Concatenates a list of aliases and returns a new alias.

Concatenates two aliases and returns a new alias.

Creates a module with the given name and defined by the given quoted expressions.

Checks if the module defines the given function or macro.

Checks if the module defines a function or macro of the given kind.

Checks if the current module defines the given type (private, opaque or not).

Returns all functions and macros defined in module.

Returns all functions defined in module, according to its kind.

Deletes the entry (or entries) for the given module attribute.

Deletes a definition from a module.

Evaluates the quoted contents in the given module's context.

Gets the given attribute from a module.

Returns the definition for the given name-arity pair.

Gets the last set value of a given attribute from a module.

Checks if the given attribute has been defined.

Makes the given functions in module overridable.

Checks if a module is open.

Returns true if tuple in module was marked as overridable at some point.

Returns all overridable definitions in module.

Puts a module attribute with key and value in the given module.

Returns information about module attributes used by Elixir.

Concatenates a list of aliases and returns a new alias only if the alias was already referenced.

Concatenates two aliases and returns a new alias only if the alias was already referenced.

Copies the given spec as a callback.

Splits the given module name into binary parts.

Types

@type def_kind() :: :def | :defp | :defmacro | :defmacrop
@type definition() :: {atom(), arity()}

Callbacks

@callback __info__(:attributes) :: keyword()
@callback __info__(:compile) :: [term()]
@callback __info__(:functions) :: keyword()
@callback __info__(:macros) :: keyword()
@callback __info__(:md5) :: binary()
@callback __info__(:module) :: module()
@callback __info__(:struct) :: [%{field: atom(), required: boolean()}] | nil

Provides runtime information about functions, macros, and other information defined by the module.

Each module gets an __info__/1 function when it's compiled. The function takes one of the following items:

  • :attributes - a keyword list with all persisted attributes

  • :compile - a list with compiler metadata

  • :functions - a keyword list of public functions and their arities

  • :macros - a keyword list of public macros and their arities

  • :md5 - the MD5 of the module

  • :module - the module atom name

  • :struct - (since v1.14.0) if the module defines a struct and if so each field in order

Functions

Link to this function

attributes_in(module)

View Source (since 1.13.0)
@spec attributes_in(module()) :: [atom()]

Returns all module attributes names defined in module.

This function can only be used on modules that have not yet been compiled.

Examples

defmodule Example do
  @foo 1
  Module.register_attribute(__MODULE__, :bar, accumulate: true)

  :foo in Module.attributes_in(__MODULE__)
  #=> true

  :bar in Module.attributes_in(__MODULE__)
  #=> true
end
@spec concat([binary() | atom()]) :: atom()

Concatenates a list of aliases and returns a new alias.

It handles binaries and atoms.

Examples

iex> Module.concat([Foo, Bar])
Foo.Bar

iex> Module.concat([Foo, "Bar"])
Foo.Bar
@spec concat(binary() | atom(), binary() | atom()) :: atom()

Concatenates two aliases and returns a new alias.

It handles binaries and atoms.

Examples

iex> Module.concat(Foo, Bar)
Foo.Bar

iex> Module.concat(Foo, "Bar")
Foo.Bar
Link to this function

create(module, quoted, opts)

View Source
@spec create(module(), Macro.t(), Macro.Env.t() | keyword()) ::
  {:module, module(), binary(), term()}

Creates a module with the given name and defined by the given quoted expressions.

The line where the module is defined and its file must be passed as options.

It returns a tuple of shape {:module, module, binary, term} where module is the module name, binary is the module bytecode and term is the result of the last expression in quoted.

Similar to Kernel.defmodule/2, the binary will only be written to disk as a .beam file if Module.create/3 is invoked in a file that is currently being compiled.

Examples

contents =
  quote do
    def world, do: true
  end

Module.create(Hello, contents, Macro.Env.location(__ENV__))

Hello.world()
#=> true

Differences from defmodule

Module.create/3 works similarly to Kernel.defmodule/2 and return the same results. While one could also use Kernel.defmodule/2 to define modules dynamically, this function is preferred when the module body is given by a quoted expression.

Another important distinction is that Module.create/3 allows you to control the environment variables used when defining the module, while Kernel.defmodule/2 automatically uses the environment it is invoked at.

@spec defines?(module(), definition()) :: boolean()

Checks if the module defines the given function or macro.

Use defines?/3 to assert for a specific type.

This function can only be used on modules that have not yet been compiled. Use Kernel.function_exported?/3 and Kernel.macro_exported?/3 to check for public functions and macros respectively in compiled modules.

Note that defines? returns false for functions and macros that have been defined but then marked as overridable and no other implementation has been provided. You can check the overridable status by calling overridable?/2.

Examples

defmodule Example do
  Module.defines?(__MODULE__, {:version, 0}) #=> false
  def version, do: 1
  Module.defines?(__MODULE__, {:version, 0}) #=> true
end
Link to this function

defines?(module, tuple, def_kind)

View Source
@spec defines?(module(), definition(), def_kind()) :: boolean()

Checks if the module defines a function or macro of the given kind.

kind can be any of :def, :defp, :defmacro, or :defmacrop.

This function can only be used on modules that have not yet been compiled. Use Kernel.function_exported?/3 and Kernel.macro_exported?/3 to check for public functions and macros respectively in compiled modules.

Examples

defmodule Example do
  Module.defines?(__MODULE__, {:version, 0}, :def) #=> false
  def version, do: 1
  Module.defines?(__MODULE__, {:version, 0}, :def) #=> true
end
Link to this function

defines_type?(module, definition)

View Source (since 1.7.0)
@spec defines_type?(module(), definition()) :: boolean()

Checks if the current module defines the given type (private, opaque or not).

This function is only available for modules being compiled.

@spec definitions_in(module()) :: [definition()]

Returns all functions and macros defined in module.

It returns a list with all defined functions and macros, public and private, in the shape of [{name, arity}, ...].

This function can only be used on modules that have not yet been compiled. Use the Module.__info__/1 callback to get the public functions and macros in compiled modules.

Examples

defmodule Example do
  def version, do: 1
  defmacrop test(arg), do: arg
  Module.definitions_in(__MODULE__) #=> [{:version, 0}, {:test, 1}]
end
Link to this function

definitions_in(module, kind)

View Source
@spec definitions_in(module(), def_kind()) :: [definition()]

Returns all functions defined in module, according to its kind.

This function can only be used on modules that have not yet been compiled. Use the Module.__info__/1 callback to get the public functions and macros in compiled modules.

Examples

defmodule Example do
  def version, do: 1
  Module.definitions_in(__MODULE__, :def)  #=> [{:version, 0}]
  Module.definitions_in(__MODULE__, :defp) #=> []
end
Link to this function

delete_attribute(module, key)

View Source
@spec delete_attribute(module(), atom()) :: term()

Deletes the entry (or entries) for the given module attribute.

It returns the deleted attribute value. If the attribute has not been set nor configured to accumulate, it returns nil.

If the attribute is set to accumulate, then this function always returns a list. Deleting the attribute removes existing entries but the attribute will still accumulate.

Examples

defmodule MyModule do
  Module.put_attribute(__MODULE__, :custom_threshold_for_lib, 10)
  Module.delete_attribute(__MODULE__, :custom_threshold_for_lib)
end
Link to this function

delete_definition(module, arg)

View Source (since 1.12.0)
@spec delete_definition(module(), definition()) :: boolean()

Deletes a definition from a module.

It returns true if the definition exists and it was removed, otherwise it returns false.

Link to this function

eval_quoted(module_or_env, quoted, binding \\ [], opts \\ [])

View Source
@spec eval_quoted(
  module() | Macro.Env.t(),
  Macro.t(),
  list(),
  keyword() | Macro.Env.t()
) :: term()

Evaluates the quoted contents in the given module's context.

A list of environment options can also be given as argument. See Code.eval_string/3 for more information.

Raises an error if the module was already compiled.

Examples

defmodule Foo do
  contents =
    quote do
      def sum(a, b), do: a + b
    end

  Module.eval_quoted(__MODULE__, contents)
end

Foo.sum(1, 2)
#=> 3

For convenience, you can pass any Macro.Env struct, such as __ENV__/0, as the first argument or as options. Both the module and all options will be automatically extracted from the environment:

defmodule Foo do
  contents =
    quote do
      def sum(a, b), do: a + b
    end

  Module.eval_quoted(__ENV__, contents)
end

Foo.sum(1, 2)
#=> 3

Note that if you pass a Macro.Env struct as first argument while also passing opts, they will be merged with opts having precedence.

Link to this function

get_attribute(module, key, default \\ nil)

View Source
@spec get_attribute(module(), atom(), term()) :: term()

Gets the given attribute from a module.

If the attribute was marked with accumulate with Module.register_attribute/3, a list is always returned. nil is returned if the attribute has not been marked with accumulate and has not been set to any value.

The @ macro compiles to a call to this function. For example, the following code:

@foo

Expands to something akin to:

Module.get_attribute(__MODULE__, :foo)

This function can only be used on modules that have not yet been compiled. Use the Module.__info__/1 callback to get all persisted attributes, or Code.fetch_docs/1 to retrieve all documentation related attributes in compiled modules.

Examples

defmodule Foo do
  Module.put_attribute(__MODULE__, :value, 1)
  Module.get_attribute(__MODULE__, :value) #=> 1

  Module.get_attribute(__MODULE__, :value, :default) #=> 1
  Module.get_attribute(__MODULE__, :not_found, :default) #=> :default

  Module.register_attribute(__MODULE__, :value, accumulate: true)
  Module.put_attribute(__MODULE__, :value, 1)
  Module.get_attribute(__MODULE__, :value) #=> [1]
end
Link to this function

get_definition(module, arg, options \\ [])

View Source (since 1.12.0)
@spec get_definition(module(), definition(), keyword()) ::
  {:v1, def_kind(), meta :: keyword(),
   [
     {meta :: keyword(), arguments :: [Macro.t()], guards :: [Macro.t()],
      Macro.t()}
   ]}
  | nil

Returns the definition for the given name-arity pair.

It returns a tuple with the version, the kind, the definition metadata, and a list with each clause. Each clause is a four-element tuple with metadata, the arguments, the guards, and the clause AST.

The clauses are returned in the Elixir AST but a subset that has already been expanded and normalized. This makes it useful for analyzing code but it cannot be reinjected into the module as it will have lost some of its original context. Given this AST representation is mostly internal, it is versioned and it may change at any time. Therefore, use this API with caution.

Options

  • :skip_clauses (since v1.14.0) - returns [] instead of returning the clauses. This is useful when there is only an interest in fetching the kind and the metadata
Link to this function

get_last_attribute(module, key, default \\ nil)

View Source (since 1.15.0)
@spec get_last_attribute(module(), atom(), term()) :: term()

Gets the last set value of a given attribute from a module.

If the attribute was marked with accumulate with Module.register_attribute/3, the previous value to have been set will be returned. If the attribute does not accumulate, this call is the same as calling Module.get_attribute/3.

This function can only be used on modules that have not yet been compiled. Use the Module.__info__/1 callback to get all persisted attributes, or Code.fetch_docs/1 to retrieve all documentation related attributes in compiled modules.

Examples

defmodule Foo do
  Module.put_attribute(__MODULE__, :value, 1)
  Module.get_last_attribute(__MODULE__, :value) #=> 1

  Module.get_last_attribute(__MODULE__, :not_found, :default) #=> :default

  Module.register_attribute(__MODULE__, :acc, accumulate: true)
  Module.put_attribute(__MODULE__, :acc, 1)
  Module.get_last_attribute(__MODULE__, :acc) #=> 1
  Module.put_attribute(__MODULE__, :acc, 2)
  Module.get_last_attribute(__MODULE__, :acc) #=> 2
end
Link to this function

has_attribute?(module, key)

View Source (since 1.10.0)
@spec has_attribute?(module(), atom()) :: boolean()

Checks if the given attribute has been defined.

An attribute is defined if it has been registered with register_attribute/3 or assigned a value. If an attribute has been deleted with delete_attribute/2 it is no longer considered defined.

This function can only be used on modules that have not yet been compiled.

Examples

defmodule MyModule do
  @value 1
  Module.register_attribute(__MODULE__, :other_value)
  Module.put_attribute(__MODULE__, :another_value, 1)

  Module.has_attribute?(__MODULE__, :value) #=> true
  Module.has_attribute?(__MODULE__, :other_value) #=> true
  Module.has_attribute?(__MODULE__, :another_value) #=> true

  Module.has_attribute?(__MODULE__, :undefined) #=> false

  Module.delete_attribute(__MODULE__, :value)
  Module.has_attribute?(__MODULE__, :value) #=> false
end
Link to this function

make_overridable(module, tuples)

View Source
@spec make_overridable(module(), [definition()]) :: :ok
@spec make_overridable(module(), module()) :: :ok

Makes the given functions in module overridable.

An overridable function is lazily defined, allowing a developer to customize it. See Kernel.defoverridable/1 for more information and documentation.

Once a function or a macro is marked as overridable, it will no longer be listed under definitions_in/1 or return true when given to defines?/2 until another implementation is given.

@spec open?(module()) :: boolean()

Checks if a module is open.

A module is "open" if it is currently being defined and its attributes and functions can be modified.

Link to this function

overridable?(module, tuple)

View Source
@spec overridable?(module(), definition()) :: boolean()

Returns true if tuple in module was marked as overridable at some point.

Note overridable?/2 returns true even if the definition was already overridden. You can use defines?/2 to see if a definition exists or one is pending.

Link to this function

overridables_in(module)

View Source (since 1.13.0)
@spec overridables_in(module()) :: [atom()]

Returns all overridable definitions in module.

Note a definition is included even if it was was already overridden. You can use defines?/2 to see if a definition exists or one is pending.

This function can only be used on modules that have not yet been compiled.

Examples

defmodule Example do
  def foo, do: 1
  def bar, do: 2

  defoverridable foo: 0, bar: 0
  def foo, do: 3

  [bar: 0, foo: 0] = Module.overridables_in(__MODULE__) |> Enum.sort()
end
Link to this function

put_attribute(module, key, value)

View Source
@spec put_attribute(module(), atom(), term()) :: :ok

Puts a module attribute with key and value in the given module.

Examples

defmodule MyModule do
  Module.put_attribute(__MODULE__, :custom_threshold_for_lib, 10)
end
Link to this function

register_attribute(module, attribute, options)

View Source
@spec register_attribute(module(), atom(), accumulate: boolean(), persist: boolean()) ::
  :ok

Registers an attribute.

By registering an attribute, a developer is able to customize how Elixir will store and accumulate the attribute values.

Options

When registering an attribute, two options can be given:

  • :accumulate - several calls to the same attribute will accumulate instead of overriding the previous one. New attributes are always added to the top of the accumulated list.

  • :persist - the attribute will be persisted in the Erlang Abstract Format. Useful when interfacing with Erlang libraries.

By default, both options are false. Once an attribute has been set to accumulate or persist, the behaviour cannot be reverted.

Examples

defmodule MyModule do
  Module.register_attribute(__MODULE__, :custom_threshold_for_lib, accumulate: true)

  @custom_threshold_for_lib 10
  @custom_threshold_for_lib 20
  @custom_threshold_for_lib #=> [20, 10]
end
Link to this function

reserved_attributes()

View Source (since 1.12.0)
@spec reserved_attributes() :: map()

Returns information about module attributes used by Elixir.

See the "Module attributes" section in the module documentation for more information on each attribute.

Examples

iex> map = Module.reserved_attributes()
iex> Map.has_key?(map, :moduledoc)
true
iex> Map.has_key?(map, :doc)
true
@spec safe_concat([binary() | atom()]) :: atom()

Concatenates a list of aliases and returns a new alias only if the alias was already referenced.

If the alias was not referenced yet, fails with ArgumentError. It handles binaries and atoms.

Examples

iex> Module.safe_concat([List, Chars])
List.Chars
Link to this function

safe_concat(left, right)

View Source
@spec safe_concat(binary() | atom(), binary() | atom()) :: atom()

Concatenates two aliases and returns a new alias only if the alias was already referenced.

If the alias was not referenced yet, fails with ArgumentError. It handles binaries and atoms.

Examples

iex> Module.safe_concat(List, Chars)
List.Chars
Link to this function

spec_to_callback(module, definition)

View Source (since 1.7.0)
@spec spec_to_callback(module(), definition()) :: boolean()

Copies the given spec as a callback.

Returns true if there is such a spec and it was copied as a callback. If the function associated to the spec has documentation defined prior to invoking this function, the docs are copied too.

@spec split(module() | String.t()) :: [String.t(), ...]

Splits the given module name into binary parts.

module has to be an Elixir module, as split/1 won't work with Erlang-style modules (for example, split(:lists) raises an error).

split/1 also supports splitting the string representation of Elixir modules (that is, the result of calling Atom.to_string/1 with the module name).

Examples

iex> Module.split(Very.Long.Module.Name.And.Even.Longer)
["Very", "Long", "Module", "Name", "And", "Even", "Longer"]
iex> Module.split("Elixir.String.Chars")
["String", "Chars"]