Elixir v1.3.0-rc.0 Process View Source

Conveniences for working with processes and the process dictionary.

Besides the functions available in this module, the Kernel module exposes and auto-imports some basic functionality related to processes available through the functions:

Link to this section Summary

Functions

Returns true if the process exists and is alive (i.e. it is not exiting and has not exited yet). Otherwise, returns false

Cancels a timer created by send_after/3

Deletes the given key from the process dictionary

If monitor_ref is a reference which the calling process obtained by calling monitor/1, this monitoring is turned off. If the monitoring is already turned off, nothing happens

Sends an exit signal with the given reason to the pid

Sets certain flags for the process which calls this function. Returns the old value of the flag

Sets certain flags for the process pid, in the same manner as flag/2. Returns the old value of the flag. The allowed values for flag are only a subset of those allowed in flag/2, namely :save_calls

Returns all key-value pairs in the process dictionary

Returns the value for the given key or default if key is not set

Returns all keys in the process dictionary

Returns all keys that have the given value

Returns the pid of the group leader for the process which evaluates the function

Sets the group leader of pid to leader. Typically, this is used when a processes started from a certain shell should have a group leader other than :init

Puts the calling process into a wait state where its memory allocation has been reduced as much as possible, which is useful if the process does not expect to receive any messages in the near future

Returns information about the process identified by pid, or returns nil if the process is not alive. Use this only for debugging information

Returns information about the process identified by pid, or returns nil if the process is not alive

Creates a link between the calling process and another process (or port) pid, if there is not such a link already

Returns a list of process identifiers corresponding to all the processes currently existing on the local node

The calling process starts monitoring the given item. It returns the monitor reference

Stores the given key-value pair in the process dictionary

Reads a timer created by send_after/3

Associates the atom name with a pid or a port identifier

Returns a list of names which have been registered using register/2

Sends a message to the given process

Sends msg to dest after time milliseconds

Sleeps the current process by timeout

Spawns the given function according to the given options

Spawns the given function from module mod, passing the given args according to the given options

Removes the link, if there is one, between the calling process and the process or port referred to by pid. Returns true and does not fail, even if there is no link or id does not exist

Removes the registered name, associated with a pid or a port identifier

Returns the pid or port identifier with the registered name. Returns nil if the name is not registered

Link to this section Types

Link to this type spawn_opt() View Source
spawn_opt ::
  :link |
  :monitor |
  {:priority, :low | :normal | :high} |
  {:fullsweep_after, non_neg_integer} |
  {:min_heap_size, non_neg_integer} |
  {:min_bin_vheap_size, non_neg_integer}
Link to this type spawn_opts() View Source
spawn_opts() :: [spawn_opt]

Link to this section Functions

Link to this function alive?(pid) View Source
alive?(pid) :: boolean

Returns true if the process exists and is alive (i.e. it is not exiting and has not exited yet). Otherwise, returns false.

pid must refer to a process at the local node.

Inlined by the compiler.

Link to this function cancel_timer(timer_ref) View Source
cancel_timer(reference) :: non_neg_integer | false

Cancels a timer created by send_after/3.

When the result is an integer, it represents the time in milliseconds left until the timer would have expired.

When the result is false, a timer corresponding to timer_ref could not be found. This can be either because the timer expired, already has been canceled, or because timer_ref never corresponded to a timer.

If the timer has expired, the timeout message has been sent, but it does not tell you whether or not it has arrived at its destination yet.

Inlined by the compiler.

Link to this function delete(key) View Source
delete(term) :: term | nil

Deletes the given key from the process dictionary.

Link to this function demonitor(monitor_ref, options \\ []) View Source
demonitor(reference, options :: [:flush | :info]) :: boolean

If monitor_ref is a reference which the calling process obtained by calling monitor/1, this monitoring is turned off. If the monitoring is already turned off, nothing happens.

See :erlang.demonitor/2 for more info.

Inlined by the compiler.

Link to this function exit(pid, reason) View Source
exit(pid, term) :: true

Sends an exit signal with the given reason to the pid.

The following behaviour applies if reason is any term except :normal or :kill:

  1. If pid is not trapping exits, pid will exit with the given reason.

  2. If pid is trapping exits, the exit signal is transformed into a message {:EXIT, from, reason} and delivered to the message queue of pid.

  3. If reason is the atom :normal, pid will not exit (unless it is the calling process’s pid, in which case it will exit with the reason :normal). If it is trapping exits, the exit signal is transformed into a message {:EXIT, from, :normal} and delivered to its message queue.

  4. If reason is the atom :kill, that is if exit(pid, :kill) is called, an untrappable exit signal is sent to pid which will unconditionally exit with exit reason :killed.

Inlined by the compiler.

Examples

Process.exit(pid, :kill)
Link to this function flag(flag, value) View Source
flag(process_flag, term) :: term

Sets certain flags for the process which calls this function. Returns the old value of the flag.

See :erlang.process_flag/2 for more info.

Link to this function flag(pid, flag, value) View Source
flag(pid, :save_calls, non_neg_integer) :: non_neg_integer

Sets certain flags for the process pid, in the same manner as flag/2. Returns the old value of the flag. The allowed values for flag are only a subset of those allowed in flag/2, namely :save_calls.

See :erlang.process_flag/3 for more info.

Link to this function get() View Source
get() :: [{term, term}]

Returns all key-value pairs in the process dictionary.

Inlined by the compiler.

Link to this function get(key, default \\ nil) View Source
get(term, default :: term) :: term

Returns the value for the given key or default if key is not set.

Link to this function get_keys() View Source
get_keys() :: [term]

Returns all keys in the process dictionary.

Inlined by the compiler.

Link to this function get_keys(value) View Source
get_keys(term) :: [term]

Returns all keys that have the given value.

Inlined by the compiler.

Link to this function group_leader() View Source
group_leader() :: pid

Returns the pid of the group leader for the process which evaluates the function.

Link to this function group_leader(pid, leader) View Source
group_leader(pid, leader :: pid) :: true

Sets the group leader of pid to leader. Typically, this is used when a processes started from a certain shell should have a group leader other than :init.

Link to this function hibernate(mod, fun, args) View Source
hibernate(module, atom, list) :: no_return

Puts the calling process into a wait state where its memory allocation has been reduced as much as possible, which is useful if the process does not expect to receive any messages in the near future.

See :erlang.hibernate/3 for more info.

Inlined by the compiler.

Returns information about the process identified by pid, or returns nil if the process is not alive. Use this only for debugging information.

See :erlang.process_info/1 for more info.

Link to this function info(pid, spec) View Source
info(pid, atom | [atom]) ::
  {atom, term} |
  [{atom, term}] |
  nil

Returns information about the process identified by pid, or returns nil if the process is not alive.

See :erlang.process_info/2 for more info.

Link to this function link(pid) View Source
link(pid | port) :: true

Creates a link between the calling process and another process (or port) pid, if there is not such a link already.

See :erlang.link/1 for more info.

Inlined by the compiler.

Returns a list of process identifiers corresponding to all the processes currently existing on the local node.

Note that a process that is exiting, exists but is not alive, i.e., alive?/1 will return false for a process that is exiting, but its process identifier will be part of the result returned.

See :erlang.processes/0 for more info.

Link to this function monitor(item) View Source
monitor(pid | {reg_name :: atom, node :: atom} | reg_name :: atom) :: reference

The calling process starts monitoring the given item. It returns the monitor reference.

See the need for monitoring for an example. See :erlang.monitor/2 for more info.

Inlined by the compiler.

Link to this function put(key, value) View Source
put(term, term) :: term | nil

Stores the given key-value pair in the process dictionary.

The return value is the value that was previously stored under the key key (or nil in case no value was stored under key).

Link to this function read_timer(timer_ref) View Source
read_timer(reference) :: non_neg_integer | false

Reads a timer created by send_after/3.

When the result is an integer, it represents the time in milliseconds left until the timer will expire.

When the result is false, a timer corresponding to timer_ref could not be found. This can be either because the timer expired, already has been canceled, or because timer_ref never corresponded to a timer.

If the timer has expired, the timeout message has been sent, but it does not tell you whether or not it has arrived at its destination yet.

Inlined by the compiler.

Link to this function register(pid, name) View Source
register(pid | port, atom) :: true

Associates the atom name with a pid or a port identifier.

name, can then be used instead of the pid / port identifier with the Kernel.send/2 function. Process.register/2 will fail with ArgumentError if the pid supplied is no longer alive, (check with alive?/1) or if the name is already registered (check with whereis/1) or if the pid is already registered to a different name.

Link to this function registered() View Source
registered() :: [atom]

Returns a list of names which have been registered using register/2.

Link to this function send(dest, msg, options) View Source
send(dest, msg, [option]) ::
  :ok |
  :noconnect |
  :nosuspend when dest: pid | port | atom | {atom, node}, msg: any, option: :noconnect | :nosuspend

Sends a message to the given process.

If the option :noconnect is used and sending the message would require an auto-connection to another node the message is not sent and :noconnect is returned.

If the option :nosuspend is used and sending the message would cause the sender to be suspended the message is not sent and :nosuspend is returned.

Otherwise the message is sent and :ok is returned.

Examples

iex> Process.send({:name, :node_does_not_exist}, :hi, [:noconnect])
:noconnect
Link to this function send_after(dest, msg, time) View Source
send_after(pid | atom, term, non_neg_integer) :: reference

Sends msg to dest after time milliseconds.

If dest is a pid, it must be the pid of a local process, dead or alive. If dest is an atom, it must be the name of a registered process which is looked up at the time of delivery. No error is given if the name does not refer to a process.

This function returns a timer reference, which can be read or canceled with read_timer/1 and cancel_timer/1.

Finally, the timer will be automatically canceled if the given dest is a pid which is not alive or when the given pid exits. Note that timers will not be automatically canceled when dest is an atom (as the atom resolution is done on delivery).

Sleeps the current process by timeout.

timeout is either the number of milliseconds to sleep as an integer or the atom :infinity. When :infinity is given, the current process will suspend forever.

Use this function with extreme care. For almost all situations where you would use sleep/1 in Elixir, there is likely a more correct, faster and precise way of achieving it with message passing.

For example, if you are waiting a process to perform some action, it is better to communicate.

In other words, do not:

Task.start_link fn ->
  do_something()
  ...
end

# Wait until work is done
Process.sleep(2000)

But do:

parent = self()
Task.start_link fn ->
  do_something()
  send parent, :work_is_done
  ...
end

receive do
  :work_is_done -> :ok
after
  30_000 -> :timeout # Optional timeout
end

Or even use Task.async/1 and Task.await/2 in the example above.

Similarly, if you are waiting for a process to terminate, use monitor instead of sleep. Do not:

Task.start_link fn ->
  ...
end

# Wait until task terminates
Process.sleep(2000)

Instead do:

{:ok, pid} =
  Task.start_link fn ->
    ...
  end

ref = Process.monitor(pid)
receive do
  {:DOWN, ^ref, _, _, _} -> :task_is_down
after
  30_000 -> :timeout # Optional timeout
end
Link to this function spawn(fun, opts) View Source
spawn((() -> any), spawn_opts) :: pid | {pid, reference}

Spawns the given function according to the given options.

The result depends on the given options. In particular, if :monitor is given as an option, it will return a tuple containing the pid and the monitoring reference, otherwise just the spawned process pid.

It also accepts extra options, for the list of available options check :erlang.spawn_opt/4.

Inlined by the compiler.

Link to this function spawn(mod, fun, args, opts) View Source
spawn(module, atom, list, spawn_opts) ::
  pid |
  {pid, reference}

Spawns the given function from module mod, passing the given args according to the given options.

The result depends on the given options. In particular, if :monitor is given as an option, it will return a tuple containing the pid and the monitoring reference, otherwise just the spawned process pid.

It also accepts extra options, for the list of available options check :erlang.spawn_opt/4.

Inlined by the compiler.

Link to this function unlink(pid) View Source
unlink(pid | port) :: true

Removes the link, if there is one, between the calling process and the process or port referred to by pid. Returns true and does not fail, even if there is no link or id does not exist

See :erlang.unlink/1 for more info.

Inlined by the compiler.

Link to this function unregister(name) View Source
unregister(atom) :: true

Removes the registered name, associated with a pid or a port identifier.

Fails with ArgumentError if the name is not registered to any pid or port.

See :erlang.unregister/1 for more info.

Link to this function whereis(name) View Source
whereis(atom) :: pid | port | nil

Returns the pid or port identifier with the registered name. Returns nil if the name is not registered.

See :erlang.whereis/1 for more info.