ExUnit
ExUnit
v1.12.3

View Source ExUnit (ExUnit v1.12.3)

Unit testing framework for Elixir.

Example

A basic setup for ExUnit is shown below:

# File: assertion_test.exs

# 1) Start ExUnit.
ExUnit.start()

# 2) Create a new test module (test case) and use "ExUnit.Case".
defmodule AssertionTest do
  # 3) Note that we pass "async: true", this runs the test case
  #    concurrently with other test cases. The individual tests
  #    within each test case are still run serially.
  use ExUnit.Case, async: true

  # 4) Use the "test" macro instead of "def" for clarity.
  test "the truth" do
    assert true
  end
end

To run the tests above, run the file using elixir from the command line. Assuming you named the file assertion_test.exs, you can run it as:

elixir assertion_test.exs

Case, Callbacks and Assertions

See ExUnit.Case and ExUnit.Callbacks for more information about defining test cases and setting up callbacks.

The ExUnit.Assertions module contains a set of macros to generate assertions with appropriate error messages.

Integration with Mix

Mix is the project management and build tool for Elixir. Invoking mix test from the command line will run the tests in each file matching the pattern *_test.exs found in the test directory of your project.

You must create a test_helper.exs file inside the test directory and put the code common to all tests there.

The minimum example of a test_helper.exs file would be:

# test/test_helper.exs
ExUnit.start()

Mix will load the test_helper.exs file before executing the tests. It is not necessary to require the test_helper.exs file in your test files. Run mix help test for more information.

Link to this section Summary

Types

failed()

The error state returned by ExUnit.Test and ExUnit.TestModule

state()

All tests start with a state of nil.

suite_result()

A map representing the results of running a test suite

test_id()

Functions

after_suite(function)

Sets a callback to be executed after the completion of a test suite.

async_run()

Starts tests asynchronously while test cases are still loading.

await_run(task)

Awaits for a test suite that has been started with async_run/0.

configuration()

Returns ExUnit configuration.

configure(options)

Configures ExUnit.

fetch_test_supervisor()

Fetches the test supervisor for the current test.

plural_rule(word)

Returns the pluralization for word.

plural_rule(word, pluralization)

Registers a pluralization for word.

run()

Runs the tests. It is invoked automatically if ExUnit is started via start/1.

start(options \\ [])

Starts ExUnit and automatically runs tests right before the VM terminates.

Link to this section Types

Link to this type

failed()

View Source 
@type failed() :: [{Exception.kind(), reason :: term(), Exception.stacktrace()}]

The error state returned by ExUnit.Test and ExUnit.TestModule

Link to this type

state()

View Source 
@type state() ::
  nil
  | {:excluded, binary()}
  | {:failed, failed()}
  | {:invalid, module()}
  | {:skipped, binary()}

All tests start with a state of nil.

A finished test can be in one of five states:

  1. Passed (also represented by nil)
  2. Failed
  3. Skipped (via @tag :skip)
  4. Excluded (via :exclude filters)
  5. Invalid (when setup_all fails)
Link to this type

suite_result()

View Source 
@type suite_result() :: %{
  excluded: non_neg_integer(),
  failures: non_neg_integer(),
  skipped: non_neg_integer(),
  total: non_neg_integer()
}

A map representing the results of running a test suite

Link to this type

test_id()

View Source 
@type test_id() :: {module(), name :: atom()}

Link to this section Functions

Link to this function

after_suite(function)

View Source (since 1.8.0) 
@spec after_suite((suite_result() -> any())) :: :ok

Sets a callback to be executed after the completion of a test suite.

Callbacks set with after_suite/1 must accept a single argument, which is a map containing the results of the test suite's execution.

If after_suite/1 is called multiple times, the callbacks will be called in reverse order. In other words, the last callback set will be the first to be called.

Link to this function

async_run()

View Source (since 1.12.0) 
@spec async_run() :: Task.t()

Starts tests asynchronously while test cases are still loading.

It returns a task that must be given to await_run/0 when a result is desired.

Link to this function

await_run(task)

View Source (since 1.12.0) 
@spec await_run(Task.t()) :: suite_result()

Awaits for a test suite that has been started with async_run/0.

Link to this function

configuration()

View Source 
@spec configuration() :: Keyword.t()

Returns ExUnit configuration.

Link to this function

configure(options)

View Source 
@spec configure(Keyword.t()) :: :ok

Configures ExUnit.

Options

ExUnit supports the following options:

  • :assert_receive_timeout - the timeout to be used on assert_receive calls in milliseconds, defaults to 100;

  • :autorun - if ExUnit should run by default on exit. Defaults to true;

  • :capture_log - if ExUnit should default to keeping track of log messages and print them on test failure. Can be overridden for individual tests via @tag capture_log: false. Defaults to false;

  • :colors - a keyword list of color options to be used by some formatters:

    • :enabled - boolean option to enable colors, defaults to IO.ANSI.enabled?/0;
    • :diff_insert - color of the insertions on diffs, defaults to :green;
    • :diff_insert_whitespace - color of the whitespace insertions on diffs, defaults to IO.ANSI.color_background(2, 0, 0);
    • :diff_delete - color of the deletions on diffs, defaults to :red;
    • :diff_delete_whitespace - color of the whitespace deletions on diffs, defaults to IO.ANSI.color_background(0, 2, 0);

  • :exclude - specifies which tests are run by skipping tests that match the filter;

  • :failures_manifest_file - specifies a path to the file used to store failures between runs;

  • :formatters - the formatters that will print results, defaults to [ExUnit.CLIFormatter];

  • :include - specifies which tests are run by skipping tests that do not match the filter. Keep in mind that all tests are included by default, so unless they are excluded first, the :include option has no effect. To only run the tests that match the :include filter, exclude the :test tag first (see the documentation for ExUnit.Case for more information on tags);

  • :max_cases - maximum number of tests to run in parallel. Only tests from different modules run in parallel. It defaults to System.schedulers_online * 2 to optimize both CPU-bound and IO-bound tests;

  • :max_failures - the suite stops evaluating tests when this number of test failures is reached. All tests within a module that fail when using the setup_all/1,2 callbacks are counted as failures. Defaults to :infinity;

  • :only_test_ids - a list of {module_name, test_name} tuples that limits what tests get run;

  • :refute_receive_timeout - the timeout to be used on refute_receive calls in milliseconds, defaults to 100;

  • :seed - an integer seed value to randomize the test suite. This seed is also mixed with the test module and name to create a new unique seed on every test, which is automatically fed into the :rand module. This provides randomness between tests, but predictable and reproducible results. A :seed of 0 will disable randomization and the tests in each file will always run in the order that they were defined in;

  • :slowest - prints timing information for the N slowest tests. Running ExUnit with slow test reporting automatically runs in trace mode. It is disabled by default;

  • :stacktrace_depth - configures the stacktrace depth to be used on formatting and reporters, defaults to 20;

  • :timeout - sets the timeout for the tests in milliseconds, defaults to 60_000;

  • :trace - sets ExUnit into trace mode, this sets :max_cases to 1 and prints each test case and test while running. Note that in trace mode test timeouts will be ignored as timeout is set to :infinity.

  • :test_location_relative_path - the test location is the file:line information printed by tests as a shortcut to run a given test. When this value is set, the value is used as a prefix for the test itself. This is typically used by Mix to properly set-up umbrella projects

Any arbitrary configuration can also be passed to configure/1 or start/1, and these options can then be used in places such as custom formatters. These other options will be ignored by ExUnit itself.

Link to this function

fetch_test_supervisor()

View Source (since 1.11.0) 
@spec fetch_test_supervisor() :: {:ok, pid()} | :error

Fetches the test supervisor for the current test.

Returns {:ok, supervisor_pid} or :error if not called from the test process.

This is the same supervisor as used by ExUnit.Callbacks.start_supervised/2 and similar, see ExUnit.Callbacks module documentation for more information.

Link to this function

plural_rule(word)

View Source 
@spec plural_rule(binary()) :: binary()

Returns the pluralization for word.

If one is not registered, returns the word appended with an "s".

Link to this function

plural_rule(word, pluralization)

View Source 
@spec plural_rule(binary(), binary()) :: :ok

Registers a pluralization for word.

If one is already registered, it is replaced.

Link to this function

run()

View Source 
@spec run() :: suite_result()

Runs the tests. It is invoked automatically if ExUnit is started via start/1.

Returns a map containing the total number of tests, the number of failures, the number of excluded tests and the number of skipped tests.

Link to this function

start(options \\ [])

View Source 
@spec start(Keyword.t()) :: :ok

Starts ExUnit and automatically runs tests right before the VM terminates.

It accepts a set of options to configure ExUnit (the same ones accepted by configure/1).

If you want to run tests manually, you can set the :autorun option to false and use run/0 to run tests.