Changelog

v0.14.1

This is a security/bug fix patch release. It should be safe to update for everyone.

v0.14.0

This release updates to Buildroot 2021.08 and OTP 24.1. If you have made a custom system off this one, please review the nerves_system_br v1.17.0 release notes.

v0.13.2

This release updates Erlang/OTP from 24.0.3 to 24.0.5 and Buildroot from 2021.05 to 2021.05.1. Both of these are security/bug fix updates. This is expected to be a safe upgrade from v1.16.1 for all users.

  • Updated dependencies

  • Improvements

    • Beta support for using a runtime.exs script for runtime configuration.
    • Added a provision task to the fwup.config to enable re-provisioning a MicroSD card without changing its contents.
    • Adds a default /etc/sysctl.conf that enables use of ICMP in Erlang. This requires nerves_runtime v0.11.5 or later to automatically load the sysctl variables. With it using :gen_udp to send/receive ICMP will "just work". It also makes it easier to add other sysctl variables if needed.

v0.13.1

This release updates Nerves Toolchains to v1.4.3 and OTP 24.0.3. It should be safe for everyone to apply.

v0.13.0

This release updates to Buildroot 2021.05 and OTP 24.0.2. If you have made a custom system off this one, please review the nerves_system_br v1.16.0 release notes.

  • Updated dependencies

  • Improvements

    • This release now contains debug symbols and includes the Build-ID in the ELF headers. This makes it easier to get stack traces from C programs. As before, the Nerves tooling strips all symbols from firmware images, so this won't make programs bigger.

v0.12.1

This is a security/bug fix release that updates to Buildroot 2021.02.1 and OTP 23.3.1. It should be safe for everyone to apply.

v0.12.0

This release updates to Buildroot 2021.02 and OTP 23.2.7. If you have made a custom system off this one, please review the nerves_system_br v1.15.0 release notes.

The Nerves toolchain has also been updated to v1.4.2. This brings in Linux 4.14 headers to enable use of cdev and eBPF. This won't affect most users.

v0.11.0

This release updates to Buildroot 2020.11.2, GCC 10.2 and OTP 23.2.4.

When migrating custom systems based, please be aware of the following important changes:

v0.10.4

This is a bug fix release and contains no major changes.

v0.10.3

This release includes a patch release update to Buildroot 2020.08.2.

  • Updated dependencies

  • Improvements

    • Switched source for built-in WiFi module firmware. This pulls in newer firmware versions that were found to fix issues on the Raspberry Pi 4. It may improve built-in WiFi on other Raspberry Pis.

v0.10.2

  • Fixes
    • Adds libnl back to support VintageNet

v0.10.1

The main change in this release is to bump the Linux kernel to 5.4. This follows similar updates to Linux 5.4 across the official Nerves systems. Please review the linux-5.4.defconfig for changes.

v0.10.0

This release updates to Buildroot 2020.08 and OTP 23.1.1.

v0.9.2

This release updates to Buildroot 2020.05.1 and OTP 23.0.3 which are both bug fix releases.

  • Updated dependencies

  • New features

    • The /data directory now exists for storing application-specific data. It is currently a symlink to /root. Using /data will eventually be encouraged over /root even though currently there is no advantage. This change makes it possible to start migrating paths in applications and libraries.
  • Fixes

    • Fixed old references to the -Os compiler flag. All C/C++ code will default to using -O2 now.

v0.9.1

  • Fixes
    • Remove nerves_system_linter from hex package. This fixes mix dependency errors in projects that reference systems with different nerves_system_linter dependency specs.

v0.9.0

This release updates the system to use Buildroot 2020.05 and Erlang/OTP 23. Please see the respective release notes for updates and deprecations in both projects for changes that may affect your application.

v0.8.2

v0.8.1

  • Updated dependencies
    • nerves_system_br v1.11.2
    • Erlang 22.3.1
    • erlinit 1.7.0 - tty initialization support
    • fwup 1.6.0 - xdelta3/VCDIFF patch support
    • Enable unixodbc so that Erlang's odbc application can be used in projects

v0.8.0

This release updates Buildroot to 2020.02 and upgrades gcc from 8.3 to 9.2. While this is a minor version bump due to the Buildroot release update, barring advanced usage of Nerves, this is a straightforward update from v0.7.2.

v0.7.2

v0.7.1

  • Enhancements

    • Set expand=true on the application data partition. This will only take effect for users running the complete task, fwup will not expand application data partitions that exist during upgrade tasks.
  • Updated dependencies

v0.7.0

This release updates Buildroot to 2019.11 with security and bug fix updates across Linux packages. Enables dnsd, udhcpd and ifconfig in the default Busybox configuration to support vintage_net and vintage_net_wizard. See the nerves_system_br notes for details.

v0.6.2

This release updates Buildroot to 2019.08.2 with security and bug fix updates across Linux packages. See the nerves_system_br notes for details. Erlang/OTP is now at 22.1.7.

v0.6.1

This release pulls in security and bug fix updates from nerves_system_br. Erlang/OTP is now at 22.1.1.

v0.6.0

This release updates Buildroot to 2019.08 with security and bug fix updates across Linux packages. See the nerves_system_br notes for details.

v0.5.2

v0.5.1

v0.5.0

This release

This release updates Erlang to OTP 22 and gcc from version 7.3.0 to 8.3.0. See the nerves_system_br and toolchain release notes for more information.

v0.4.2

  • Bux fixes
    • Add TAR option --no-same-owner to fix errors when untarring artifacts as the root user.
  • Updated dependencies

v0.4.1

  • Improvements

    • Bump C compiler options to -O2 from -Os. This provides a small, but measurable performance improvement (500ms at boot in a trivial project tested on nerves_system_rpi0).
  • Updated dependencies

v0.4.0

v0.3.0

Host requirements

Building firmware using this system requires fwup to be updated on your host computer to at least v1.2.5. The target minimum version requirement has not changed from 0.15.0.

Serial numbers

Device serial numbers are now set using NERVES_SERIAL_NUMBER instead of SERIAL_NUMBER. This is to reduce ambiguity on the source of the serial by name spacing it along side other Nerves variables. The U-Boot environment key has also changed from serial_number to nerves_serial_number. The erlinit.config has been updated to provide backwards compatibility for setting the hostname from the serial number by checking for nerves_serial_number and falling back to serial_number.

Custom provisioning

Provisioning data is applied at the time of calling the fwup task complete. The complete task is executed when writing the firmware to the target disk. During this time, fwup will include the contents of a provisioning file located at ${NERVES_SYSTEM}/images/fwup_include/provisioning.conf. By default, this file only sets nerves_serial_number. You can add additional provisioning data by overriding the location of this file to include your own by setting the environment variable NERVES_PROVISIONING. If you override this variable you will be responsible for also setting nerves_serial_number.

  • Updated dependencies

  • Enhancements

    • Moved boardid config from inside erlinit.config to /etc/boardid.config

v0.2.1

  • Fix up toolchain references

v0.2.0

  • Switch from glibc to muslc to reduce image size
  • Update to nerves_system_br v0.14.0

v0.1.0

  • Initial release