recon_trace is a module that handles tracing in a safe manner for single Erlang nodes, currently for function calls only. Functionality includes:

• Nicer to use interface (arguably) than dbg or trace BIFs.
• Protection against dumb decisions (matching all calls on a node being traced, for example)
• Adding safe guards in terms of absolute trace count or rate-limitting
• Nicer formatting than default traces

tracing-erlang-code

Tracing Erlang Code

The Erlang Trace BIFs allow to trace any Erlang code at all. They work in two parts: pid specifications, and trace patterns.

Pid specifications let you decide which processes to target. They can be specific pids, all pids, existing pids, or new pids (those not spawned at the time of the function call).

The trace patterns represent functions. Functions can be specified in two parts: specifying the modules, functions, and arguments, and then with Erlang match specifications to add constraints to arguments (see calls/3 for details).

What defines whether you get traced or not is the intersection of both:

           _,--------,_      _,--------,_
        ,-'            `-,,-'            `-,
     ,-'              ,-'  '-,              `-,
    |   Matching    -'        '-   Matching    |
    |     Pids     |  Getting   |    Trace     |
    |              |   Traced   |  Patterns    |
    |               -,        ,-               |
     '-,              '-,  ,-'              ,-'
        '-,_          _,-''-,_          _,-'
            '--------'        '--------'

If either the pid specification excludes a process or a trace pattern excludes a given call, no trace will be received.

example-session

Example Session

First let's trace the queue:new functions in any process:

   1> recon_trace:calls({queue, new, '_'}, 1).
   1
   13:14:34.086078 <0.44.0> queue:new()
   Recon tracer rate limit tripped.

The limit was set to 1 trace message at most, and recon let us know when that limit was reached.

Let's instead look for all the queue:in/2 calls, to see what it is we're inserting in queues:

   2> recon_trace:calls({queue, in, 2}, 1).
   1
   13:14:55.365157 <0.44.0> queue:in(a, {[],[]})
   Recon tracer rate limit tripped.

In order to see the content we want, we should change the trace patterns to use a fun that matches on all arguments in a list (_) and returns return_trace(). This last part will generate a second trace for each call that includes the return value:

   3> recon_trace:calls({queue, in, fun(_) -> return_trace() end}, 3).
   1
  
   13:15:27.655132 <0.44.0> queue:in(a, {[],[]})
  
   13:15:27.655467 <0.44.0> queue:in/2 --> {[a],[]}
  
   13:15:27.757921 <0.44.0> queue:in(a, {[],[]})
   Recon tracer rate limit tripped.

Matching on argument lists can be done in a more complex manner:

   4> recon_trace:calls(
   4>   {queue, '_', fun([A,_]) when is_list(A); is_integer(A) andalso A > 1 -> return_trace() end},
   4>   {10,100}
   4> ).
   32
  
   13:24:21.324309 <0.38.0> queue:in(3, {[],[]})
  
   13:24:21.371473 <0.38.0> queue:in/2 --> {[3],[]}
  
   13:25:14.694865 <0.53.0> queue:split(4, {[10,9,8,7],[1,2,3,4,5,6]})
  
   13:25:14.695194 <0.53.0> queue:split/2 --> {{[4,3,2],[1]},{[10,9,8,7],[5,6]}}
  
   5> recon_trace:clear().
   ok

Note that in the pattern above, no specific function ('_') was matched against. Instead, the fun used restricted functions to those having two arguments, the first of which is either a list or an integer greater than 1.

The limit was also set using {10,100} instead of an integer, making the rate-limitting at 10 messages per 100 milliseconds, instead of an absolute value.

Any tracing can be manually interrupted by calling recon_trace:clear/0, or killing the shell process.

Be aware that extremely broad patterns with lax rate-limitting (or very high absolute limits) may impact your node's stability in ways recon_trace cannot easily help you with.

In doubt, start with the most restrictive tracing possible, with low limits, and progressively increase your scope.

See calls/3 for more details and tracing possibilities.

structure

Structure

This library is production-safe due to taking the following structure for tracing:

   [IO/Group leader] <---------------------,
     |                                     |
   [shell] ---> [tracer process] ----> [formatter]

The tracer process receives trace messages from the node, and enforces limits in absolute terms or trace rates, before forwarding the messages to the formatter. This is done so the tracer can do as little work as possible and never block while building up a large mailbox.

The tracer process is linked to the shell, and the formatter to the tracer process. The formatter also traps exits to be able to handle all received trace messages until the tracer termination, but will then shut down as soon as possible.

In case the operator is tracing from a remote shell which gets disconnected, the links between the shell and the tracer should make it so tracing is automatically turned off once you disconnect.

If sending output to the Group Leader is not desired, you may specify a different pid() via the option io_server in the calls/3 function. For instance to write the traces to a file you can do something like

   1> {ok, Dev} = file:open("/tmp/trace",[write]).
   2> recon_trace:calls({queue, in, fun(_) -> return_trace() end}, 3, [{io_server, Dev}]).
   1
   3>
   Recon tracer rate limit tripped.
   4> file:close(Dev).

The only output still sent to the Group Leader is the rate limit being tripped, and any errors. The rest will be sent to the other IO server (see http://erlang.org/doc/apps/stdlib/io_protocol.html).

record-printing

Record Printing