View Source Ecto SQL Sandbox Usage Guide
~S"""
__ __ _ _
\ \ / / | | | |
\ \ /\ / /__| | ___ ___ _ __ ___ ___| |
\ \/ \/ / _ \ |/ __/ _ \| '_ ` _ \ / _ \ |
\ /\ / __/ | (_| (_) | | | | | | __/_|
\/ \/ \___|_|\___\___/|_| |_| |_|\___(_)
Welcome to the sandbox setup guide! This guide contains a complete
Phoenix application with a basic CRUD to demonstrate the features
of ReqSandbox.
The setup is pretty long so this message is here to let you know
that by default the guide expects the following:
- You are running a PostgreSQL server locally.
- The db user is "postgres" and the password is "postgres".
- There exists (or the db user can create) a database
named "req_sandbox_guide".
- Livebook can run a local Phoenix server on port 5001.
If you need to adjust any of these assumptions, you need to make
the necessary changes in this setup block. Note you can make
changes here at any time and then run "Reconnect and setup" to
restart your Livebook session.
Once your Livebook session is up and running, follow the steps to
examine how the Plug Phoenix.Ecto.SQL.Sandbox provides logical
isolation to your HTTP requests.
Happy hacking!
"""
# Modify these values to suit your environment
pg_host = "127.0.0.1"
pg_user = "postgres"
pg_pass = "postgres"
pg_db = "req_sandbox_guide"
port = 5001
# END: user values
Mix.install([
{:req, "~> 0.5.0"},
{:req_sandbox, "~> 0.2.0"},
{:bandit, "~> 1.5"},
{:jason, "~> 1.0"},
{:phoenix, "~> 1.7.0"},
{:phoenix_ecto, "~> 4.0"},
{:ecto_sql, "~> 3.9"},
{:postgrex, "~> 0.16"},
{:kino, "~> 0.7"}
])
Application.put_env(:req_sandbox_guide, Repo,
url: "ecto://#{pg_user}:#{pg_pass}@#{pg_host}/#{pg_db}",
pool: Ecto.Adapters.SQL.Sandbox,
ownership_timeout: :timer.hours(24)
)
Application.put_env(:req_sandbox_guide, ReqSandboxGuide.Endpoint,
adapter: Bandit.PhoenixAdapter,
render_errors: [formats: [json: ReqSandboxGuide.ErrorJSON], layout: false],
http: [ip: {127, 0, 0, 1}, port: port],
server: true,
secret_key_base: String.duplicate("a", 64)
)
Application.put_env(:phoenix, :json_library, Jason)
# ------ Do not modify anything below this line -------
defmodule Repo do
use Ecto.Repo,
otp_app: :req_sandbox_guide,
adapter: Ecto.Adapters.Postgres
end
defmodule Migration0 do
use Ecto.Migration
def change do
create(table("posts")) do
add(:msg, :string)
timestamps(type: :utc_datetime_usec)
end
end
end
defmodule Post do
use Ecto.Schema
import Ecto.Changeset
schema "posts" do
field(:msg, :string)
timestamps(type: :utc_datetime_usec)
end
def changeset(post, attrs) do
post
|> cast(attrs, [:msg])
|> validate_required([:msg])
end
end
defmodule ReqSandboxGuide do
def controller do
quote do
use Phoenix.Controller,
namespace: ReqSandboxGuide,
formats: [:json]
import Plug.Conn
unquote(verified_routes())
end
end
def verified_routes do
quote do
use Phoenix.VerifiedRoutes,
endpoint: ReqSandboxGuide.Endpoint,
router: Router
end
end
defmacro __using__(which) when is_atom(which) do
apply(__MODULE__, which, [])
end
end
defmodule ReqSandboxGuide.PostController do
use ReqSandboxGuide, :controller
action_fallback(ReqSandboxGuide.FallbackController)
def index(conn, _params) do
posts = Repo.all(Post)
render(conn, :index, posts: posts)
end
def create(conn, %{"post" => post_params}) do
changeset = %Post{} |> Post.changeset(post_params)
with {:ok, %Post{} = post} <- Repo.insert(changeset) do
conn
|> put_status(:created)
|> put_resp_header("location", ~p"/posts/#{post}")
|> render(:show, post: post)
end
end
def show(conn, %{"id" => id}) do
post = Repo.get!(Post, id)
render(conn, :show, post: post)
end
def delete(conn, %{"id" => id}) do
post = Repo.get!(Post, id)
with {:ok, %Post{}} <- Repo.delete(post) do
send_resp(conn, :no_content, "")
end
end
end
defmodule ReqSandboxGuide.FallbackController do
use ReqSandboxGuide, :controller
# This clause handles errors returned by Ecto's insert/update/delete.
def call(conn, {:error, %Ecto.Changeset{} = changeset}) do
conn
|> put_status(:unprocessable_entity)
|> put_view(json: ReqSandboxGuide.ChangesetJSON)
|> render("error.json", changeset: changeset)
end
# This clause is an example of how to handle resources that cannot be found.
def call(conn, {:error, :not_found}) do
conn
|> put_status(:not_found)
|> put_view(json: ReqSandboxGuide.ErrorJSON)
|> render(:"404")
end
end
defmodule ReqSandboxGuide.PostJSON do
def index(%{posts: posts}) do
%{data: for(post <- posts, do: data(post))}
end
def show(%{post: post}) do
%{data: data(post)}
end
defp data(%Post{} = post) do
%{
id: post.id,
msg: post.msg
}
end
end
defmodule ReqSandboxGuide.ChangesetJSON do
def translate_errors(changeset) do
Ecto.Changeset.traverse_errors(changeset, &translate_error/1)
end
def error(%{changeset: changeset}) do
# When encoded, the changeset returns its errors
# as a JSON object. So we just pass it forward.
%{errors: translate_errors(changeset)}
end
def translate_error({msg, _opts}) do
msg
end
end
defmodule ReqSandboxGuide.ErrorJSON do
def render(template, _assigns) do
%{errors: %{detail: Phoenix.Controller.status_message_from_template(template)}}
end
end
defmodule Router do
use Phoenix.Router
pipeline :api do
plug(:accepts, ["json"])
end
scope "/", ReqSandboxGuide do
pipe_through(:api)
get("/", PostController, :index)
resources("/posts", PostController, except: [:new, :edit, :update])
end
end
defmodule ReqSandboxGuide.Endpoint do
use Phoenix.Endpoint, otp_app: :req_sandbox_guide
# In an integration server environment, you want to configure timeout
# to something reasonable for your workflows. Automated tests usually
# require only a short timeout, but short timeouts can interfere with
# manual user testing (and demonstrations like this one!) and produce
# unexpected results.
plug(Phoenix.Ecto.SQL.Sandbox,
at: "/sandbox",
repo: Repo,
timeout: :timer.hours(24)
)
plug(Plug.Parsers,
parsers: [:urlencoded, :multipart, :json],
pass: ["*/*"],
json_decoder: Phoenix.json_library()
)
plug(Router)
end
# Creates the guide's database.
# It may already exist and that's okay.
{:ok, pgx} =
Postgrex.start_link(
hostname: pg_host,
username: pg_user,
password: pg_pass,
database: ""
)
Postgrex.query(pgx, "CREATE DATABASE #{pg_db}", [])
Process.unlink(pgx)
Process.exit(pgx, :shutdown)
# Configures migrations
_ = Repo.__adapter__().storage_down(Repo.config())
:ok = Repo.__adapter__().storage_up(Repo.config())
# Starts the Repo and the Endpoint
{:ok, _} = Supervisor.start_link([Repo, ReqSandboxGuide.Endpoint], strategy: :one_for_one)
# Runs migrations
Ecto.Migrator.run(Repo, [{0, Migration0}], :up, all: true, log_migrations_sql: :debug)
# Puts the Repo in manual mode
Ecto.Adapters.SQL.Sandbox.mode(Repo, :manual)Introduction to Ecto SQL Sandboxes
Welcome back to the sandbox guide! Once the setup above is complete, we can begin making requests! First let's explore sandboxes from the server's perspective.
The setup block of this Livebook defines a Repo module that acts as our app's data store. It is configured to use the Ecto.Adapters.SQL.Sandbox pool to checkout a DBConnection. The pool has been set to :manual mode, which requires that each process explicitly checkout a connection before it can be used.
Our sample app defines a simple Post schema to demonstrate the sandbox. Try to fetch all of the Posts without first checking out a connection (hint: this raises an error).
# Remember, this raises an error! Keep going :)
Repo.all(Post)Did you receive a DBConnection.OwnershipError in the last step? Good! That means the sandbox's manual mode is working correctly. You must first checkout a DBConnection from the Sandbox:
:ok = Ecto.Adapters.SQL.Sandbox.checkout(Repo)Once you have checked out a connection, you can query the database. Let's try to fetch all the posts again:
Repo.all(Post)Since the list of posts is empty, now is a good time to insert one:
post = Repo.insert!(%Post{msg: "hello, world!"})...and we can select the post we inserted:
Repo.get!(Post, post.id)...and afterwards we checkin the connection:
:ok = Ecto.Adapters.SQL.Sandbox.checkin(Repo)You have just observed how the Ecto SQL Sandbox pool provides logical isolation for concurrent processes. If you think you might have missed it, go back and re-evaluate all of the steps in this section. You will notice that the list of Posts is always empty.
Sandbox sessions are transactional, and when the connection is checked in, the transaction is rolled back. The changes are accessible only within the transaction and they are never actually committed to the database.
Concurrent HTTP Tests
This Livebook is configured with a Phoenix server and a simple API for creating and retrieving posts. You can use the Req requests package to access the API.
Just like before, try to fetch some posts, this time as an external client using the API. Just like before, without a sandbox connection, this request will fail:
req =
Req.new(
base_url: ReqSandboxGuide.Endpoint.url(),
headers: [accept: "application/json"],
max_retries: 0
)
# Remember, I return errors! Keep going :)
Req.get!(req, url: "/posts").bodyFor concurrent and transactional tests with external HTTP clients, the plug Phoenix.Ecto.SQL.Sandbox exposes a route on your app's Endpoint where external clients may POST to spawn a new sandbox session and DELETE to stop an active session. The docs use the example route "/sandbox":
# lib/my_app_web/endpoint.ex
plug Phoenix.Ecto.SQL.Sandbox,
at: "/sandbox",
repo: MyApp.Repo,
timeout: 15_000 # the defaultThis Livebook is configured using the "/sandbox" route. We can use the Req requests package to create
res = Req.post!(req, url: "/sandbox")
sandbox_token = res.bodyNow create one or more posts:
msg = Kino.Input.text("Message", default: "Hello, world!")result =
Req.post!(req,
url: "/posts",
json: %{post: %{msg: Kino.Input.read(msg)}},
user_agent: sandbox_token
).body...and fetch the last post created:
last_id = get_in(result, ~w|data id|)
Req.get!(req, url: "/posts/#{last_id}", user_agent: sandbox_token).body["data"]...or fetch the list:
posts = Req.get!(req, url: "/posts", user_agent: sandbox_token).body["data"]
Kino.DataTable.new(posts, name: "Posts")When you are done, delete the sandbox session:
Req.delete!(req, url: "/sandbox", user_agent: sandbox_token).body...and that is all! Just remember to manage your sandbox token and include it on all requests, or...
ReqSandbox to the reqscue! 🚀
ReqSandbox simplifies the process of making sandbox requests to a Phoenix server. By attaching the ReqSandbox plugin to your Req request, the sandbox requirement is handled automatically:
req = req |> ReqSandbox.attach()
for n <- 1..3 do
Req.post!(req, url: "/posts", json: %{post: %{msg: "Hello, #{n}!"}})
end
|> Enum.map(fn %{body: %{"data" => data}} -> data end)
|> Kino.DataTable.new(name: "Created Posts")ReqSandbox even works inside Tasks:
Task.async_stream(1..3, fn _ ->
msg = "Hello, #{DateTime.utc_now()}!"
Req.post!(req, url: "/posts", json: %{post: %{msg: msg}})
end)
|> Enum.map(fn {_, %{body: %{"data" => data}}} -> data end)
|> Kino.DataTable.new(name: "Created Posts (Task.async_stream)")Perform one last listing:
req
|> Req.get!(url: "/posts")
|> Map.fetch!(:body)
|> Map.fetch!("data")
|> Kino.DataTable.new(name: "Posts")...and when you are finished, delete the active sandbox session:
_ = ReqSandbox.delete!(req)