View Source Duration (Elixir v1.17.3)
Struct and functions for handling durations.
A Duration struct represents a collection of time scale units,
allowing for manipulation and calculation of durations.
Date and time scale units are represented as integers, allowing for both positive and negative values.
Microseconds are represented using a tuple {microsecond, precision}.
This ensures compatibility with other calendar types implementing time,
such as Time, DateTime, and NaiveDateTime.
Shifting
The most common use of durations in Elixir's standard library is to "shift" the calendar types.
iex> Date.shift(~D[2016-01-03], month: 2)
~D[2016-03-03]In the example above, Date.shift/2 automatically converts the units
into a Duration struct, although one can also be given directly:
iex> Date.shift(~D[2016-01-03], Duration.new!(month: 2))
~D[2016-03-03]It is important to note that shifting is not an arithmetic operation.
For example, adding date + 1 month + 1 month does not yield the same
result as date + 2 months. Let's see an example:
iex> ~D[2016-01-31] |> Date.shift(month: 1) |> Date.shift(month: 1)
~D[2016-03-29]
iex> ~D[2016-01-31] |> Date.shift(month: 2)
~D[2016-03-31]As you can see above, the results differ, which explains why operations
with durations are called "shift" rather than "add". This happens because,
once we add one month to 2016-01-31, we get 2016-02-29. Then adding
one extra month gives us 2016-03-29 instead of 2016-03-31.
In particular, when applying durations to Calendar.ISO types:
larger units (such as years and months) are applied before smaller ones (such as weeks, hours, days, and so on)
units are collapsed into months (
:yearand:month), seconds (:week,:day,:hour,:minute,:second) and microseconds (:microsecond) before they are applied1 year is equivalent to 12 months, 1 week is equivalent to 7 days. Therefore, 4 weeks are not equivalent to 1 month
in case of non-existing dates, the results are rounded down to the nearest valid date
As the shift/2 functions are calendar aware, they are guaranteed to return
valid date/times, considering leap years as well as DST in applicable time zones.
Intervals
Durations in Elixir can be combined with stream operations to build intervals. For example, to retrieve the next three Wednesdays starting from 17th April, 2024:
iex> ~D[2024-04-17] |> Stream.iterate(&Date.shift(&1, week: 1)) |> Enum.take(3)
[~D[2024-04-17], ~D[2024-04-24], ~D[2024-05-01]]However, once again, it is important to remember that shifting a duration is not arithmetic, so you may want to use the functions in this module depending on what you to achieve. Compare the results of both examples below:
# Adding one month after the other
iex> date = ~D[2016-01-31]
iex> duration = Duration.new!(month: 1)
iex> stream = Stream.iterate(date, fn prev_date -> Date.shift(prev_date, duration) end)
iex> Enum.take(stream, 3)
[~D[2016-01-31], ~D[2016-02-29], ~D[2016-03-29]]
# Multiplying durations by an index
iex> date = ~D[2016-01-31]
iex> duration = Duration.new!(month: 1)
iex> stream = Stream.from_index(fn i -> Date.shift(date, Duration.multiply(duration, i)) end)
iex> Enum.take(stream, 3)
[~D[2016-01-31], ~D[2016-02-29], ~D[2016-03-31]]The second example consistently points to the last day of the month, as it performs operations on the duration, rather than shifting date after date.
Summary
Types
The duration type specifies a %Duration{} struct or a keyword list of valid duration unit pairs.
The duration struct type.
The unit pair type specifies a pair of a valid duration unit key and value.
Functions
Adds units of given durations d1 and d2.
Same as from_iso8601/1 but raises an ArgumentError.
Multiplies duration units by given integer.
Negates duration units.
Creates a new Duration struct from given unit_pairs.
Subtracts units of given durations d1 and d2.
Converts the given duration to an ISO 8601-2:2019 formatted string.
Types
The duration type specifies a %Duration{} struct or a keyword list of valid duration unit pairs.
@type t() :: %Duration{ day: integer(), hour: integer(), microsecond: {integer(), 0..6}, minute: integer(), month: integer(), second: integer(), week: integer(), year: integer() }
The duration struct type.
@type unit_pair() :: {:year, integer()} | {:month, integer()} | {:week, integer()} | {:day, integer()} | {:hour, integer()} | {:minute, integer()} | {:second, integer()} | {:microsecond, {integer(), 0..6}}
The unit pair type specifies a pair of a valid duration unit key and value.
Functions
Adds units of given durations d1 and d2.
Respects the the highest microsecond precision of the two.
Examples
iex> Duration.add(Duration.new!(week: 2, day: 1), Duration.new!(day: 2))
%Duration{week: 2, day: 3}
iex> Duration.add(Duration.new!(microsecond: {400, 3}), Duration.new!(microsecond: {600, 6}))
%Duration{microsecond: {1000, 6}}Parses an ISO 8601 formatted duration string to a Duration struct.
Duration strings, as well as individual units, may be prefixed with plus/minus signs so that:
-PT6H3Mparses as%Duration{hour: -6, minute: -3}-PT6H-3Mparses as%Duration{hour: -6, minute: 3}+PT6H3Mparses as%Duration{hour: 6, minute: 3}+PT6H-3Mparses as%Duration{hour: 6, minute: -3}
Duration designators must be provided in order of magnitude: P[n]Y[n]M[n]W[n]DT[n]H[n]M[n]S.
Only seconds may be specified with a decimal fraction, using either a comma or a full stop: P1DT4,5S.
Examples
iex> Duration.from_iso8601("P1Y2M3DT4H5M6S")
{:ok, %Duration{year: 1, month: 2, day: 3, hour: 4, minute: 5, second: 6}}
iex> Duration.from_iso8601("P3Y-2MT3H")
{:ok, %Duration{year: 3, month: -2, hour: 3}}
iex> Duration.from_iso8601("-PT10H-30M")
{:ok, %Duration{hour: -10, minute: 30}}
iex> Duration.from_iso8601("PT4.650S")
{:ok, %Duration{second: 4, microsecond: {650000, 3}}}Same as from_iso8601/1 but raises an ArgumentError.
Examples
iex> Duration.from_iso8601!("P1Y2M3DT4H5M6S")
%Duration{year: 1, month: 2, day: 3, hour: 4, minute: 5, second: 6}
iex> Duration.from_iso8601!("P10D")
%Duration{day: 10}Multiplies duration units by given integer.
Examples
iex> Duration.multiply(Duration.new!(day: 1, minute: 15, second: -10), 3)
%Duration{day: 3, minute: 45, second: -30}
iex> Duration.multiply(Duration.new!(microsecond: {200, 4}), 3)
%Duration{microsecond: {600, 4}}Negates duration units.
Examples
iex> Duration.negate(Duration.new!(day: 1, minute: 15, second: -10))
%Duration{day: -1, minute: -15, second: 10}
iex> Duration.negate(Duration.new!(microsecond: {500000, 4}))
%Duration{microsecond: {-500000, 4}}Creates a new Duration struct from given unit_pairs.
Raises an ArgumentError when called with invalid unit pairs.
Examples
iex> Duration.new!(year: 1, week: 3, hour: 4, second: 1)
%Duration{year: 1, week: 3, hour: 4, second: 1}
iex> Duration.new!(second: 1, microsecond: {1000, 6})
%Duration{second: 1, microsecond: {1000, 6}}
iex> Duration.new!(month: 2)
%Duration{month: 2}Subtracts units of given durations d1 and d2.
Respects the the highest microsecond precision of the two.
Examples
iex> Duration.subtract(Duration.new!(week: 2, day: 1), Duration.new!(day: 2))
%Duration{week: 2, day: -1}
iex> Duration.subtract(Duration.new!(microsecond: {400, 6}), Duration.new!(microsecond: {600, 3}))
%Duration{microsecond: {-200, 6}}Converts the given duration to an ISO 8601-2:2019 formatted string.
Note this function implements the extension of ISO 8601:2019. This extensions allows weeks to
appear between months and days: P3M3W3D, making it fully compatible with any Duration struct.
Examples
iex> Duration.to_iso8601(Duration.new!(year: 3))
"P3Y"
iex> Duration.to_iso8601(Duration.new!(day: 40, hour: 12, minute: 42, second: 12))
"P40DT12H42M12S"
iex> Duration.to_iso8601(Duration.new!(second: 30))
"PT30S"
iex> Duration.to_iso8601(Duration.new!([]))
"PT0S"
iex> Duration.to_iso8601(Duration.new!(second: 1, microsecond: {2_200, 3}))
"PT1.002S"
iex> Duration.to_iso8601(Duration.new!(second: 1, microsecond: {-1_200_000, 4}))
"PT-0.2000S"