View Source Phoenix.Controller (Phoenix v1.7.0-rc.0)
Controllers are used to group common functionality in the same (pluggable) module.
For example, the route:
get "/users/:id", MyAppWeb.UserController, :showwill invoke the show/2 action in the MyAppWeb.UserController:
defmodule MyAppWeb.UserController do
use MyAppWeb, :controller
def show(conn, %{"id" => id}) do
user = Repo.get(User, id)
render(conn, "show.html", user: user)
end
endAn action is a regular function that receives the connection
and the request parameters as arguments. The connection is a
Plug.Conn struct, as specified by the Plug library.
options
Options
When used, the controller supports the following options:
:namespace- sets the namespace to properly inflect the layout view. By default it uses the base alias in your controller name:put_default_views- controls whether the default view and layout should be set or not
connection
Connection
A controller by default provides many convenience functions for manipulating the connection, rendering templates, and more.
Those functions are imported from two modules:
Plug.Conn- a collection of low-level functions to work with the connectionPhoenix.Controller- functions provided by Phoenix to support rendering, and other Phoenix specific behaviour
If you want to have functions that manipulate the connection
without fully implementing the controller, you can import both
modules directly instead of use Phoenix.Controller.
plug-pipeline
Plug pipeline
As with routers, controllers also have their own plug pipeline. However, different from routers, controllers have a single pipeline:
defmodule MyAppWeb.UserController do
use MyAppWeb, :controller
plug :authenticate, usernames: ["jose", "eric", "sonny"]
def show(conn, params) do
# authenticated users only
end
defp authenticate(conn, options) do
if get_session(conn, :username) in options[:usernames] do
conn
else
conn |> redirect(to: "/") |> halt()
end
end
endThe :authenticate plug will be invoked before the action. If the
plug calls Plug.Conn.halt/1 (which is by default imported into
controllers), it will halt the pipeline and won't invoke the action.
guards
Guards
plug/2 in controllers supports guards, allowing a developer to configure
a plug to only run in some particular action:
plug :authenticate, [usernames: ["jose", "eric", "sonny"]] when action in [:show, :edit]
plug :authenticate, [usernames: ["admin"]] when not action in [:index]The first plug will run only when action is show or edit. The second plug will always run, except for the index action.
Those guards work like regular Elixir guards and the only variables accessible
in the guard are conn, the action as an atom and the controller as an
alias.
controllers-are-plugs
Controllers are plugs
Like routers, controllers are plugs, but they are wired to dispatch to a particular function which is called an action.
For example, the route:
get "/users/:id", UserController, :showwill invoke UserController as a plug:
UserController.call(conn, :show)which will trigger the plug pipeline and which will eventually
invoke the inner action plug that dispatches to the show/2
function in UserController.
As controllers are plugs, they implement both init/1 and
call/2, and it also provides a function named action/2
which is responsible for dispatching the appropriate action
after the plug stack (and is also overridable).
overriding-action-2-for-custom-arguments
Overriding action/2 for custom arguments
Phoenix injects an action/2 plug in your controller which calls the
function matched from the router. By default, it passes the conn and params.
In some cases, overriding the action/2 plug in your controller is a
useful way to inject arguments into your actions that you would otherwise
need to repeatedly fetch off the connection. For example, imagine if you
stored a conn.assigns.current_user in the connection and wanted quick
access to the user for every action in your controller:
def action(conn, _) do
args = [conn, conn.params, conn.assigns.current_user]
apply(__MODULE__, action_name(conn), args)
end
def index(conn, _params, user) do
videos = Repo.all(user_videos(user))
# ...
end
def delete(conn, %{"id" => id}, user) do
video = Repo.get!(user_videos(user), id)
# ...
end
rendering-and-layouts
Rendering and layouts
One of the main features provided by controllers is the ability
to perform content negotiation and render templates based on
information sent by the client. Read render/3 to learn more.
It is also important not to confuse Phoenix.Controller.render/3
with Phoenix.View.render/3. The former expects
a connection and relies on content negotiation while the latter is
connection-agnostic and typically invoked from your views.
Link to this section Summary
Functions
Performs content negotiation based on the available formats.
Registers the plug to call as a fallback to the controller action.
Returns the action name as an atom, raises if unavailable.
A plug that may convert a JSON response into a JSONP one.
Clears all flash messages.
Returns the controller module as an atom, raises if unavailable.
Returns the current request path with its default query parameters
Returns the current path with the given query parameters.
Returns the current request url with its default query parameters
Returns the current request URL with query params.
Deletes the CSRF token from the process dictionary.
Returns the endpoint module as an atom, raises if unavailable.
Fetches the flash storage.
Gets or generates a CSRF token.
Returns a map of previously set flash messages or an empty map.
Returns a message from flash by key (or nil if no message is available for key).
Returns the request format, such as "json", "html".
Sends html response.
Sends JSON response.
Retrieves the current layout for the given format.
Retrieves current layout formats.
Merges a map into the flash.
Enables CSRF protection.
Persists a value in flash.
Puts the format in the connection.
Stores the layout for rendering.
Sets which formats have a layout when rendering.
Stores the layout for rendering if one was not stored yet.
Stores the view for rendering if one was not stored yet.
Stores the root layout for rendering.
Puts the url string or %URI{} to be used for route generation.
Put headers that improve browser security.
Puts the URL or %URI{} to be used for the static url generation.
Stores the view for rendering.
Sends redirect response to the given url.
Render the given template or the default template specified by the current action with the given assigns.
Renders the given template and assigns based on the conn information.
Retrieves the current root layout for the given format.
Returns the router module as an atom, raises if unavailable.
Scrubs the parameters from the request.
Sends the given file or binary as a download.
Generates a status message from the template name.
Sends text response.
Retrieves the current view for the given format.
Returns the template name rendered in the view as a string (or nil if no template was rendered).
Link to this section Types
@type view() :: atom()
Link to this section Functions
@spec accepts(Plug.Conn.t(), [binary()]) :: Plug.Conn.t()
Performs content negotiation based on the available formats.
It receives a connection, a list of formats that the server is capable of rendering and then proceeds to perform content negotiation based on the request information. If the client accepts any of the given formats, the request proceeds.
If the request contains a "_format" parameter, it is considered to be the format desired by the client. If no "_format" parameter is available, this function will parse the "accept" header and find a matching format accordingly.
This function is useful when you may want to serve different content-types (such as JSON and HTML) from the same routes. However, if you always have distinct routes, you can also disable content negotiation and simply hardcode your format of choice in your route pipelines:
plug :put_format, "html"It is important to notice that browsers have historically sent bad accept headers. For this reason, this function will default to "html" format whenever:
the accepted list of arguments contains the "html" format
the accept header specified more than one media type preceded or followed by the wildcard media type "
*/*"
This function raises Phoenix.NotAcceptableError, which is rendered
with status 406, whenever the server cannot serve a response in any
of the formats expected by the client.
examples
Examples
accepts/2 can be invoked as a function:
iex> accepts(conn, ["html", "json"])or used as a plug:
plug :accepts, ["html", "json"]
plug :accepts, ~w(html json)
custom-media-types
Custom media types
It is possible to add custom media types to your Phoenix application.
The first step is to teach Plug about those new media types in
your config/config.exs file:
config :mime, :types, %{
"application/vnd.api+json" => ["json-api"]
}The key is the media type, the value is a list of formats the media type can be identified with. For example, by using "json-api", you will be able to use templates with extension "index.json-api" or to force a particular format in a given URL by sending "?_format=json-api".
After this change, you must recompile plug:
$ mix deps.clean mime --build
$ mix deps.get
And now you can use it in accepts too:
plug :accepts, ["html", "json-api"]Registers the plug to call as a fallback to the controller action.
A fallback plug is useful to translate common domain data structures
into a valid %Plug.Conn{} response. If the controller action fails to
return a %Plug.Conn{}, the provided plug will be called and receive
the controller's %Plug.Conn{} as it was before the action was invoked
along with the value returned from the controller action.
examples
Examples
defmodule MyController do
use Phoenix.Controller
action_fallback MyFallbackController
def show(conn, %{"id" => id}, current_user) do
with {:ok, post} <- Blog.fetch_post(id),
:ok <- Authorizer.authorize(current_user, :view, post) do
render(conn, "show.json", post: post)
end
end
endIn the above example, with is used to match only a successful
post fetch, followed by valid authorization for the current user.
In the event either of those fail to match, with will not invoke
the render block and instead return the unmatched value. In this case,
imagine Blog.fetch_post/2 returned {:error, :not_found} or
Authorizer.authorize/3 returned {:error, :unauthorized}. For cases
where these data structures serve as return values across multiple
boundaries in our domain, a single fallback module can be used to
translate the value into a valid response. For example, you could
write the following fallback controller to handle the above values:
defmodule MyFallbackController do
use Phoenix.Controller
def call(conn, {:error, :not_found}) do
conn
|> put_status(:not_found)
|> put_view(MyErrorView)
|> render(:"404")
end
def call(conn, {:error, :unauthorized}) do
conn
|> put_status(403)
|> put_view(MyErrorView)
|> render(:"403")
end
end@spec action_name(Plug.Conn.t()) :: atom()
Returns the action name as an atom, raises if unavailable.
@spec allow_jsonp(Plug.Conn.t(), Keyword.t()) :: Plug.Conn.t()
A plug that may convert a JSON response into a JSONP one.
In case a JSON response is returned, it will be converted to a JSONP as long as the callback field is present in the query string. The callback field itself defaults to "callback", but may be configured with the callback option.
In case there is no callback or the response is not encoded in JSON format, it is a no-op.
Only alphanumeric characters and underscore are allowed in the callback name. Otherwise an exception is raised.
examples
Examples
# Will convert JSON to JSONP if callback=someFunction is given
plug :allow_jsonp
# Will convert JSON to JSONP if cb=someFunction is given
plug :allow_jsonp, callback: "cb"Clears all flash messages.
@spec controller_module(Plug.Conn.t()) :: atom()
Returns the controller module as an atom, raises if unavailable.
Returns the current request path with its default query parameters:
iex> current_path(conn)
"/users/123?existing=param"See current_path/2 to override the default parameters.
The path is normalized based on the conn.script_name and
conn.path_info. For example, "/foo//bar/" will become "/foo/bar".
If you want the original path, use conn.request_path instead.
Returns the current path with the given query parameters.
You may also retrieve only the request path by passing an empty map of params.
examples
Examples
iex> current_path(conn)
"/users/123?existing=param"
iex> current_path(conn, %{new: "param"})
"/users/123?new=param"
iex> current_path(conn, %{filter: %{status: ["draft", "published"]}})
"/users/123?filter[status][]=draft&filter[status][]=published"
iex> current_path(conn, %{})
"/users/123"The path is normalized based on the conn.script_name and
conn.path_info. For example, "/foo//bar/" will become "/foo/bar".
If you want the original path, use conn.request_path instead.
Returns the current request url with its default query parameters:
iex> current_url(conn)
"https://www.example.com/users/123?existing=param"See current_url/2 to override the default parameters.
Returns the current request URL with query params.
The path will be retrieved from the currently requested path via
current_path/1. The scheme, host and others will be received from
the URL configuration in your Phoenix endpoint. The reason we don't
use the host and scheme information in the request is because most
applications are behind proxies and the host and scheme may not
actually reflect the host and scheme accessed by the client. If you
want to access the url precisely as requested by the client, see
Plug.Conn.request_url/1.
examples
Examples
iex> current_url(conn)
"https://www.example.com/users/123?existing=param"
iex> current_url(conn, %{new: "param"})
"https://www.example.com/users/123?new=param"
iex> current_url(conn, %{})
"https://www.example.com/users/123"
custom-url-generation
Custom URL Generation
In some cases, you'll need to generate a request's URL, but using a different scheme, different host, etc. This can be accomplished in two ways.
If you want to do so in a case-by-case basis, you can define a custom function that gets the endpoint URI configuration and changes it accordingly. For example, to get the current URL always in HTTPS format:
def current_secure_url(conn, params \\ %{}) do
current_uri = MyAppWeb.Endpoint.struct_url()
current_path = Phoenix.Controller.current_path(conn, params)
Phoenix.VerifiedRoutes.unverified_url(%URI{current_uri | scheme: "https"}, current_path)
endHowever, if you want all generated URLs to always have a certain schema,
host, etc, you may use put_router_url/2.
Deletes the CSRF token from the process dictionary.
Note: The token is deleted only after a response has been sent.
@spec endpoint_module(Plug.Conn.t()) :: atom()
Returns the endpoint module as an atom, raises if unavailable.
Fetches the flash storage.
Gets or generates a CSRF token.
If a token exists, it is returned, otherwise it is generated and stored in the process dictionary.
Returns a map of previously set flash messages or an empty map.
examples
Examples
iex> get_flash(conn)
%{}
iex> conn = put_flash(conn, :info, "Welcome Back!")
iex> get_flash(conn)
%{"info" => "Welcome Back!"}Returns a message from flash by key (or nil if no message is available for key).
examples
Examples
iex> conn = put_flash(conn, :info, "Welcome Back!")
iex> get_flash(conn, :info)
"Welcome Back!"Returns the request format, such as "json", "html".
This format is used when rendering a template as an atom.
For example, render(conn, :foo) will render "foo.FORMAT"
where the format is the one set here. The default format
is typically set from the negotiation done in accepts/2.
@spec html(Plug.Conn.t(), iodata()) :: Plug.Conn.t()
Sends html response.
examples
Examples
iex> html(conn, "<html><head>...")@spec json(Plug.Conn.t(), term()) :: Plug.Conn.t()
Sends JSON response.
It uses the configured :json_library under the :phoenix
application for :json to pick up the encoder module.
examples
Examples
iex> json(conn, %{id: 123})@spec layout(Plug.Conn.t(), binary() | nil) :: {atom(), String.t() | atom()} | false
Retrieves the current layout for the given format.
If no format is given, takes the current one from the connection.
@spec layout_formats(Plug.Conn.t()) :: [String.t()]
Retrieves current layout formats.
Merges a map into the flash.
Returns the updated connection.
examples
Examples
iex> conn = merge_flash(conn, info: "Welcome Back!")
iex> Phoenix.Flash.get(conn.assigns.flash, :info)
"Welcome Back!"Enables CSRF protection.
Currently used as a wrapper function for Plug.CSRFProtection
and mainly serves as a function plug in YourApp.Router.
Check get_csrf_token/0 and delete_csrf_token/0 for
retrieving and deleting CSRF tokens.
Persists a value in flash.
Returns the updated connection.
examples
Examples
iex> conn = put_flash(conn, :info, "Welcome Back!")
iex> Phoenix.Flash.get(conn.assigns.flash, :info)
"Welcome Back!"Puts the format in the connection.
This format is used when rendering a template as an atom.
For example, render(conn, :foo) will render "foo.FORMAT"
where the format is the one set here. The default format
is typically set from the negotiation done in accepts/2.
See get_format/1 for retrieval.
@spec put_layout(Plug.Conn.t(), [{format :: atom(), layout()}] | layout()) :: Plug.Conn.t()
Stores the layout for rendering.
The layout must be a tuple, specifying the layout view and the layout
name, or false. In case a previous layout is set, put_layout also
accepts the layout name to be given as a string or as an atom. If a
string, it must contain the format. Passing an atom means the layout
format will be found at rendering time, similar to the template in
render/3. It can also be set to false. In this case, no layout
would be used.
examples
Examples
iex> layout(conn)
false
iex> conn = put_layout conn, {AppView, "application.html"}
iex> layout(conn)
{AppView, "application.html"}
iex> conn = put_layout conn, "print.html"
iex> layout(conn)
{AppView, "print.html"}
iex> conn = put_layout conn, :print
iex> layout(conn)
{AppView, :print}Raises Plug.Conn.AlreadySentError if conn is already sent.
@spec put_layout_formats(Plug.Conn.t(), [String.t()]) :: Plug.Conn.t()
Sets which formats have a layout when rendering.
examples
Examples
iex> layout_formats(conn)
["html"]
iex> put_layout_formats(conn, ["html", "mobile"])
iex> layout_formats(conn)
["html", "mobile"]Raises Plug.Conn.AlreadySentError if conn is already sent.
@spec put_new_layout(Plug.Conn.t(), [{format :: atom(), layout()}] | layout()) :: Plug.Conn.t()
Stores the layout for rendering if one was not stored yet.
Raises Plug.Conn.AlreadySentError if conn is already sent.
@spec put_new_view(Plug.Conn.t(), [{format :: atom(), view()}] | view()) :: Plug.Conn.t()
Stores the view for rendering if one was not stored yet.
Raises Plug.Conn.AlreadySentError if conn is already sent.
@spec put_root_layout(Plug.Conn.t(), [{format :: atom(), layout()}] | layout()) :: Plug.Conn.t()
Stores the root layout for rendering.
Like put_layout/2, the layout must be a tuple,
specifying the layout view and the layout name, or false.
In case a previous layout is set, put_root_layout also
accepts the layout name to be given as a string or as an atom. If a
string, it must contain the format. Passing an atom means the layout
format will be found at rendering time, similar to the template in
render/3. It can also be set to false. In this case, no layout
would be used.
examples
Examples
iex> root_layout(conn)
false
iex> conn = put_root_layout conn, {AppView, "root.html"}
iex> root_layout(conn)
{AppView, "root.html"}
iex> conn = put_root_layout conn, "bare.html"
iex> root_layout(conn)
{AppView, "bare.html"}
iex> conn = put_root_layout conn, :bare
iex> root_layout(conn)
{AppView, :bare}Raises Plug.Conn.AlreadySentError if conn is already sent.
Puts the url string or %URI{} to be used for route generation.
This function overrides the default URL generation pulled
from the %Plug.Conn{}'s endpoint configuration.
examples
Examples
Imagine your application is configured to run on "example.com" but after the user signs in, you want all links to use "some_user.example.com". You can do so by setting the proper router url configuration:
def put_router_url_by_user(conn) do
put_router_url(conn, get_user_from_conn(conn).account_name <> ".example.com")
endNow when you call Routes.some_route_url(conn, ...), it will use
the router url set above. Keep in mind that, if you want to generate
routes to the current domain, it is preferred to use
Routes.some_route_path helpers, as those are always relative.
Put headers that improve browser security.
It sets the following headers:
referrer-policy- only send origin on cross origin requestsx-frame-options- set to SAMEORIGIN to avoid clickjacking through iframes unless in the same originx-content-type-options- set to nosniff. This requires script and style tags to be sent with proper content typex-download-options- set to noopen to instruct the browser not to open a download directly in the browser, to avoid HTML files rendering inline and accessing the security context of the application (like critical domain cookies)x-permitted-cross-domain-policies- set to none to restrict Adobe Flash Player’s access to data
A custom headers map may also be given to be merged with defaults. It is recommended for custom header keys to be in lowercase, to avoid sending duplicate keys in a request. Additionally, responses with mixed-case headers served over HTTP/2 are not considered valid by common clients, resulting in dropped responses.
Puts the URL or %URI{} to be used for the static url generation.
Using this function on a %Plug.Conn{} struct tells static_url/2 to use
the given information for URL generation instead of the %Plug.Conn{}'s
endpoint configuration (much like put_router_url/2 but for static URLs).
@spec put_view(Plug.Conn.t(), [{format :: atom(), view()}] | view()) :: Plug.Conn.t()
Stores the view for rendering.
Raises Plug.Conn.AlreadySentError if conn is already sent.
examples
Examples
# Use single view module
iex> put_view(conn, AppView)
# Use multiple view module for content negotiation
iex> put_view(conn, html: AppHTML, json: AppJSON)Sends redirect response to the given url.
For security, :to only accepts paths. Use the :external
option to redirect to any URL.
The response will be sent with the status code defined within
the connection, via Plug.Conn.put_status/2. If no status
code is set, a 302 response is sent.
examples
Examples
iex> redirect(conn, to: "/login")
iex> redirect(conn, external: "https://elixir-lang.org")@spec render(Plug.Conn.t(), Keyword.t() | map() | binary() | atom()) :: Plug.Conn.t()
Render the given template or the default template specified by the current action with the given assigns.
See render/3 for more information.
@spec render(Plug.Conn.t(), binary() | atom(), Keyword.t() | map()) :: Plug.Conn.t()
Renders the given template and assigns based on the conn information.
Once the template is rendered, the template format is set as the response content type (for example, an HTML template will set "text/html" as response content type) and the data is sent to the client with default status of 200.
arguments
Arguments
conn- thePlug.Connstructtemplate- which may be an atom or a string. If an atom, like:index, it will render a template with the same format as the one returned byget_format/1. For example, for an HTML request, it will render the "index.html" template. If the template is a string, it must contain the extension too, like "index.json"assigns- a dictionary with the assigns to be used in the view. Those assigns are merged and have higher precedence than the connection assigns (conn.assigns)
examples
Examples
defmodule MyAppWeb.UserController do
use Phoenix.Controller
def show(conn, _params) do
render(conn, "show.html", message: "Hello")
end
endThe example above renders a template "show.html" from the MyAppWeb.UserView
and sets the response content type to "text/html".
In many cases, you may want the template format to be set dynamically based on the request. To do so, you can pass the template name as an atom (without the extension):
def show(conn, _params) do
render(conn, :show, message: "Hello")
endIn order for the example above to work, we need to do content negotiation with the accepts plug before rendering. You can do so by adding the following to your pipeline (in the router):
plug :accepts, ["html"]
views
Views
By default, Controllers render templates in a view with a similar name to the
controller. For example, MyAppWeb.UserController will render templates inside
the MyAppWeb.UserView. This information can be changed any time by using the
put_view/2 function:
def show(conn, _params) do
conn
|> put_view(MyAppWeb.SpecialView)
|> render(:show, message: "Hello")
endput_view/2 can also be used as a plug:
defmodule MyAppWeb.UserController do
use Phoenix.Controller
plug :put_view, html: MyAppWeb.SpecialView
def show(conn, _params) do
render(conn, :show, message: "Hello")
end
end
layouts
Layouts
Templates are often rendered inside layouts. By default, Phoenix will render layouts for html requests. For example:
defmodule MyAppWeb.UserController do
use Phoenix.Controller
def show(conn, _params) do
render(conn, "show.html", message: "Hello")
end
endwill render the "show.html" template inside an "app.html"
template specified in MyAppWeb.LayoutView. put_layout/2 can be used
to change the layout, similar to how put_view/2 can be used to change
the view.
@spec root_layout(Plug.Conn.t(), binary() | nil) :: {atom(), String.t() | atom()} | false
Retrieves the current root layout for the given format.
If no format is given, takes the current one from the connection.
@spec router_module(Plug.Conn.t()) :: atom()
Returns the router module as an atom, raises if unavailable.
@spec scrub_params(Plug.Conn.t(), String.t()) :: Plug.Conn.t()
Scrubs the parameters from the request.
This process is two-fold:
- Checks to see if the
required_keyis present - Changes empty parameters of
required_key(recursively) to nils
This function is useful for removing empty strings sent
via HTML forms. If you are providing an API, there
is likely no need to invoke scrub_params/2.
If the required_key is not present, it will
raise Phoenix.MissingParamError.
examples
Examples
iex> scrub_params(conn, "user")Sends the given file or binary as a download.
The second argument must be {:binary, contents}, where
contents will be sent as download, or{:file, path},
where path is the filesystem location of the file to
be sent. Be careful to not interpolate the path from
external parameters, as it could allow traversal of the
filesystem.
The download is achieved by setting "content-disposition"
to attachment. The "content-type" will also be set based
on the extension of the given filename but can be customized
via the :content_type and :charset options.
options
Options
:filename- the filename to be presented to the user as download:content_type- the content type of the file or binary sent as download. It is automatically inferred from the filename extension:disposition- specifies disposition type (:attachmentor:inline). If:attachmentwas used, user will be prompted to save the file. If:inlinewas used, the browser will attempt to open the file. Defaults to:attachment.:charset- the charset of the file, such as "utf-8". Defaults to none:offset- the bytes to offset when reading. Defaults to0:length- the total bytes to read. Defaults to:all:encode- encodes the filename usingURI.encode_www_form/1. Defaults totrue. Whenfalse, disables encoding. If you disable encoding, you need to guarantee there are no special characters in the filename, such as quotes, newlines, etc. Otherwise you can expose your application to security attacks
examples
Examples
To send a file that is stored inside your application priv directory:
path = Application.app_dir(:my_app, "priv/prospectus.pdf")
send_download(conn, {:file, path})When using {:file, path}, the filename is inferred from the
given path but may also be set explicitly.
To allow the user to download contents that are in memory as a binary or string:
send_download(conn, {:binary, "world"}, filename: "hello.txt")See Plug.Conn.send_file/3 and Plug.Conn.send_resp/3 if you
would like to access the low-level functions used to send files
and responses via Plug.
Generates a status message from the template name.
examples
Examples
iex> status_message_from_template("404.html")
"Not Found"
iex> status_message_from_template("whatever.html")
"Internal Server Error"@spec text(Plug.Conn.t(), String.Chars.t()) :: Plug.Conn.t()
Sends text response.
examples
Examples
iex> text(conn, "hello")
iex> text(conn, :implements_to_string)@spec view_module(Plug.Conn.t(), binary() | nil) :: atom()
Retrieves the current view for the given format.
If no format is given, takes the current one from the connection.
@spec view_template(Plug.Conn.t()) :: binary() | nil
Returns the template name rendered in the view as a string (or nil if no template was rendered).