View Source Phoenix.Socket behaviour (Phoenix v1.7.0-rc.3)

A socket implementation that multiplexes messages over channels.

Phoenix.Socket is used as a module for establishing a connection between client and server. Once the connection is established, the initial state is stored in the Phoenix.Socket struct.

The same socket can be used to receive events from different transports. Phoenix supports websocket and longpoll options when invoking Phoenix.Endpoint.socket/3 in your endpoint. websocket is set by default and longpoll can also be configured explicitly.

socket "/socket", MyAppWeb.Socket, websocket: true, longpoll: false

The command above means incoming socket connections can be made via a WebSocket connection. Incoming and outgoing events are routed to channels by topic:

channel "room:lobby", MyAppWeb.LobbyChannel

See Phoenix.Channel for more information on channels.

socket-behaviour

Socket Behaviour

Socket handlers are mounted in Endpoints and must define two callbacks:

  • connect/3 - receives the socket params, connection info if any, and authenticates the connection. Must return a Phoenix.Socket struct, often with custom assigns

  • id/1 - receives the socket returned by connect/3 and returns the id of this connection as a string. The id is used to identify socket connections, often to a particular user, allowing us to force disconnections. For sockets requiring no authentication, nil can be returned

examples

Examples

defmodule MyAppWeb.UserSocket do
  use Phoenix.Socket

  channel "room:*", MyAppWeb.RoomChannel

  def connect(params, socket, _connect_info) do
    {:ok, assign(socket, :user_id, params["user_id"])}
  end

  def id(socket), do: "users_socket:#{socket.assigns.user_id}"
end

# Disconnect all user's socket connections and their multiplexed channels
MyAppWeb.Endpoint.broadcast("users_socket:" <> user.id, "disconnect", %{})

socket-fields

Socket fields

  • :id - The string id of the socket
  • :assigns - The map of socket assigns, default: %{}
  • :channel - The current channel module
  • :channel_pid - The channel pid
  • :endpoint - The endpoint module where this socket originated, for example: MyAppWeb.Endpoint
  • :handler - The socket module where this socket originated, for example: MyAppWeb.UserSocket
  • :joined - If the socket has effectively joined the channel
  • :join_ref - The ref sent by the client when joining
  • :ref - The latest ref sent by the client
  • :pubsub_server - The registered name of the socket's pubsub server
  • :topic - The string topic, for example "room:123"
  • :transport - An identifier for the transport, used for logging
  • :transport_pid - The pid of the socket's transport process
  • :serializer - The serializer for socket messages

using-options

Using options

On use Phoenix.Socket, the following options are accepted:

  • :log - the default level to log socket actions. Defaults to :info. May be set to false to disable it

  • :partitions - each channel is spawned under a supervisor. This option controls how many supervisors will be spawned to handle channels. Defaults to the number of cores.

garbage-collection

Garbage collection

It's possible to force garbage collection in the transport process after processing large messages. For example, to trigger such from your channels, run:

send(socket.transport_pid, :garbage_collect)

Alternatively, you can configure your endpoint socket to trigger more fullsweep garbage collections more frequently, by setting the :fullsweep_after option for websockets. See Phoenix.Endpoint.socket/3 for more info.

client-server-communication

Client-server communication

The encoding of server data and the decoding of client data is done according to a serializer, defined in Phoenix.Socket.Serializer. By default, JSON encoding is used to broker messages to and from clients.

The serializer decode! function must return a Phoenix.Socket.Message which is forwarded to channels except:

  • "heartbeat" events in the "phoenix" topic - should just emit an OK reply
  • "phx_join" on any topic - should join the topic
  • "phx_leave" on any topic - should leave the topic

Each message also has a ref field which is used to track responses.

The server may send messages or replies back. For messages, the ref uniquely identifies the message. For replies, the ref matches the original message. Both data-types also include a join_ref that uniquely identifies the currently joined channel.

The Phoenix.Socket implementation may also send special messages and replies:

  • "phx_error" - in case of errors, such as a channel process crashing, or when attempting to join an already joined channel

  • "phx_close" - the channel was gracefully closed

Phoenix ships with a JavaScript implementation of both websocket and long polling that interacts with Phoenix.Socket and can be used as reference for those interested in implementing custom clients.

custom-sockets-and-transports

Custom sockets and transports

See the Phoenix.Socket.Transport documentation for more information on writing your own socket that does not leverage channels or for writing your own transports that interacts with other sockets.

custom-channels

Custom channels

You can list any module as a channel as long as it implements a child_spec/1 function. The child_spec/1 function receives the caller as argument and it must return a child spec that initializes a process.

Once the process is initialized, it will receive the following message:

{Phoenix.Channel, auth_payload, from, socket}

A custom channel implementation MUST invoke GenServer.reply(from, {:ok | :error, reply_payload}) during its initialization with a custom reply_payload that will be sent as a reply to the client. Failing to do so will block the socket forever.

A custom channel receives Phoenix.Socket.Message structs as regular messages from the transport. Replies to those messages and custom messages can be sent to the socket at any moment by building an appropriate Phoenix.Socket.Reply and Phoenix.Socket.Message structs, encoding them with the serializer and dispatching the serialized result to the transport.

For example, to handle "phx_leave" messages, which is recommended to be handled by all channel implementations, one may do:

def handle_info(
      %Message{topic: topic, event: "phx_leave"} = message,
      %{topic: topic, serializer: serializer, transport_pid: transport_pid} = socket
    ) do
  send transport_pid, serializer.encode!(build_leave_reply(message))
  {:stop, {:shutdown, :left}, socket}
end

We also recommend all channels to monitor the transport_pid on init and exit if the transport exits. We also advise to rewrite :normal exit reasons (usually due to the socket being closed) to the {:shutdown, :closed} to guarantee links are broken on the channel exit (as a :normal exit does not break links):

def handle_info({:DOWN, _, _, transport_pid, reason}, %{transport_pid: transport_pid} = socket) do
  reason = if reason == :normal, do: {:shutdown, :closed}, else: reason
  {:stop, reason, socket}
end

Any process exit is treated as an error by the socket layer unless a {:socket_close, pid, reason} message is sent to the socket before shutdown.

Custom channel implementations cannot be tested with Phoenix.ChannelTest and are currently considered experimental. The underlying API may be changed at any moment.

Link to this section Summary

Callbacks

Receives the socket params and authenticates the connection.

Identifies the socket connection.

Functions

Adds key-value pairs to socket assigns.

Defines a channel matching the given topic and transports.

Link to this section Types

@type t() :: %Phoenix.Socket{
  assigns: map(),
  channel: atom(),
  channel_pid: pid(),
  endpoint: atom(),
  handler: atom(),
  id: String.t() | nil,
  join_ref: term(),
  joined: boolean(),
  private: map(),
  pubsub_server: atom(),
  ref: term(),
  serializer: atom(),
  topic: String.t(),
  transport: atom(),
  transport_pid: pid()
}

Link to this section Callbacks

Link to this callback

connect(params, t)

View Source (optional)
@callback connect(params :: map(), t()) :: {:ok, t()} | {:error, term()} | :error

Receives the socket params and authenticates the connection.

socket-params-and-assigns

Socket params and assigns

Socket params are passed from the client and can be used to verify and authenticate a user. After verification, you can put default assigns into the socket that will be set for all channels, ie

{:ok, assign(socket, :user_id, verified_user_id)}

To deny connection, return :error or {:error, term}. To control the response the client receives in that case, define an error handler in the websocket configuration.

See Phoenix.Token documentation for examples in performing token verification on connect.

Link to this callback

connect(params, t, connect_info)

View Source (optional)
@callback connect(params :: map(), t(), connect_info :: map()) ::
  {:ok, t()} | {:error, term()} | :error
@callback id(t()) :: String.t() | nil

Identifies the socket connection.

Socket IDs are topics that allow you to identify all sockets for a given user:

def id(socket), do: "users_socket:#{socket.assigns.user_id}"

Would allow you to broadcast a "disconnect" event and terminate all active sockets and channels for a given user:

MyAppWeb.Endpoint.broadcast("users_socket:" <> user.id, "disconnect", %{})

Returning nil makes this socket anonymous.

Link to this section Functions

Link to this function

assign(socket, key, value)

View Source

Adds key-value pairs to socket assigns.

A single key-value pair may be passed, a keyword list or map of assigns may be provided to be merged into existing socket assigns.

examples

Examples

iex> assign(socket, :name, "Elixir")
iex> assign(socket, name: "Elixir", logo: "💧")
Link to this macro

channel(topic_pattern, module, opts \\ [])

View Source (macro)

Defines a channel matching the given topic and transports.

  • topic_pattern - The string pattern, for example "room:*", "users:*", or "system"
  • module - The channel module handler, for example MyAppWeb.RoomChannel
  • opts - The optional list of options, see below

options

Options

  • :assigns - the map of socket assigns to merge into the socket on join

examples

Examples

channel "topic1:*", MyChannel

topic-patterns

Topic Patterns

The channel macro accepts topic patterns in two flavors. A splat (the * character) argument can be provided as the last character to indicate a "topic:subtopic" match. If a plain string is provided, only that topic will match the channel handler. Most use-cases will use the "topic:*" pattern to allow more versatile topic scoping.

See Phoenix.Channel for more information