View Source Phoenix.LiveView behaviour (Phoenix LiveView v0.18.2)

LiveView provides rich, real-time user experiences with server-rendered HTML.

The LiveView programming model is declarative: instead of saying "once event X happens, change Y on the page", events in LiveView are regular messages which may cause changes to its state. Once the state changes, LiveView will re-render the relevant parts of its HTML template and push it to the browser, which updates itself in the most efficient manner. This means developers write LiveView templates as any other server-rendered HTML and LiveView does the hard work of tracking changes and sending the relevant diffs to the browser.

At the end of the day, a LiveView is nothing more than a process that receives events as messages and updates its state. The state itself is nothing more than functional and immutable Elixir data structures. The events are either internal application messages (usually emitted by Phoenix.PubSub) or sent by the client/browser.

LiveView is first rendered statically as part of regular HTTP requests, which provides quick times for "First Meaningful Paint", in addition to helping search and indexing engines. Then a persistent connection is established between client and server. This allows LiveView applications to react faster to user events as there is less work to be done and less data to be sent compared to stateless requests that have to authenticate, decode, load, and encode data on every request. The flipside is that LiveView uses more memory on the server compared to stateless requests.

life-cycle

Life-cycle

A LiveView begins as a regular HTTP request and HTML response, and then upgrades to a stateful view on client connect, guaranteeing a regular HTML page even if JavaScript is disabled. Any time a stateful view changes or updates its socket assigns, it is automatically re-rendered and the updates are pushed to the client.

You begin by rendering a LiveView typically from your router. When LiveView is first rendered, the mount/3 callback is invoked with the current params, the current session and the LiveView socket. As in a regular request, params contains public data that can be modified by the user. The session always contains private data set by the application itself. The mount/3 callback wires up socket assigns necessary for rendering the view. After mounting, handle_params/3 is invoked so uri and query params are handled. Finally, render/1 is invoked and the HTML is sent as a regular HTML response to the client.

After rendering the static page, LiveView connects from the client to the server where stateful views are spawned to push rendered updates to the browser, and receive client events via phx- bindings. Just like the first rendering, mount/3, is invoked with params, session, and socket state, However in the connected client case, a LiveView process is spawned on the server, runs handle_params/3 again and then pushes the result of render/1 to the client and continues on for the duration of the connection. If at any point during the stateful life-cycle a crash is encountered, or the client connection drops, the client gracefully reconnects to the server, calling mount/3 and handle_params/3 again.

LiveView also allows attaching hooks to specific life-cycle stages with attach_hook/4.

example

Example

Before writing your first example, make sure that Phoenix LiveView is properly installed. If you are just getting started, this can be easily done by running mix phx.new my_app --live. The phx.new command with the --live flag will create a new project with LiveView installed and configured. Otherwise, please follow the steps in the installation guide before continuing.

A LiveView is a simple module that requires two callbacks: mount/3 and render/1:

defmodule MyAppWeb.ThermostatLive do
  # In Phoenix v1.6+ apps, the line below should be: use MyAppWeb, :live_view
  use Phoenix.LiveView

  def render(assigns) do
    ~H"""
    Current temperature: <%= @temperature %>
    """
  end

  def mount(_params, %{"current_user_id" => user_id}, socket) do
    temperature = Thermostat.get_user_reading(user_id)
    {:ok, assign(socket, :temperature, temperature)}
  end
end

The render/1 callback receives the socket.assigns and is responsible for returning rendered content. We use the ~H sigil to define a HEEx template, which stands for HTML+EEx. They are an extension of Elixir's builtin EEx templates, with support for HTML validation, syntax-based components, smart change tracking, and more. You can learn more about the template syntax in Phoenix.Component.sigil_H/2 (note all Phoenix.Component is imported when you use Phoenix.LiveView).

Next, decide where you want to use your LiveView.

You can serve the LiveView directly from your router (recommended):

defmodule MyAppWeb.Router do
  use Phoenix.Router
  import Phoenix.LiveView.Router

  scope "/", MyAppWeb do
    live "/thermostat", ThermostatLive
  end
end

Note: the above assumes there is plug :put_root_layout call in your router that configures the LiveView layout. This call is automatically included in Phoenix v1.6 apps and described in the installation guide.

Alternatively, you can live_render from any template. In your view:

import Phoenix.Component

Then in your template:

<h1>Temperature Control</h1>
<%= live_render(@conn, MyAppWeb.ThermostatLive) %>

Once the LiveView is rendered, a regular HTML response is sent. In your app.js file, you should find the following:

import {Socket} from "phoenix"
import {LiveSocket} from "phoenix_live_view"

let csrfToken = document.querySelector("meta[name='csrf-token']").getAttribute("content")
let liveSocket = new LiveSocket("/live", Socket, {params: {_csrf_token: csrfToken}})
liveSocket.connect()

After the client connects, mount/3 will be invoked inside a spawned LiveView process. At this point, you can use connected?/1 to conditionally perform stateful work, such as subscribing to pubsub topics, sending messages, etc. For example, you can periodically update a LiveView with a timer:

defmodule DemoWeb.ThermostatLive do
  use Phoenix.LiveView
  ...

  def mount(_params, %{"current_user_id" => user_id}, socket) do
    if connected?(socket), do: Process.send_after(self(), :update, 30000)

    case Thermostat.get_user_reading(user_id) do
      {:ok, temperature} ->
        {:ok, assign(socket, temperature: temperature, user_id: user_id)}

      {:error, _reason} ->
        {:ok, redirect(socket, to: "/error")}
    end
  end

  def handle_info(:update, socket) do
    Process.send_after(self(), :update, 30000)
    {:ok, temperature} = Thermostat.get_reading(socket.assigns.user_id)
    {:noreply, assign(socket, :temperature, temperature)}
  end
end

We used connected?(socket) on mount to send our view a message every 30s if the socket is in a connected state. We receive the :update message in the handle_info/2 callback, just like in an Elixir GenServer, and update our socket assigns. Whenever a socket's assigns change, render/1 is automatically invoked, and the updates are sent to the client.

colocating-templates

Colocating templates

In the examples above, we have placed the template directly inside the LiveView:

defmodule MyAppWeb.ThermostatLive do
  use Phoenix.LiveView

  def render(assigns) do
    ~H"""
    Current temperature: <%= @temperature %>
    """
  end

For larger templates, you can place them in a file in the same directory and same name as the LiveView. For example, if the file above is placed at lib/my_app_web/live/thermostat_live.ex, you can also remove the render/1 definition above and instead put the template code at lib/my_app_web/live/thermostat_live.html.heex.

In all cases, each assign in the template will be accessible as @assign. You can learn more about assigns and HEEx templates in their own guide.

bindings

Bindings

Phoenix supports DOM element bindings for client-server interaction. For example, to react to a click on a button, you would render the element:

<button phx-click="inc_temperature">+</button>

Then on the server, all LiveView bindings are handled with the handle_event/3 callback, for example:

def handle_event("inc_temperature", _value, socket) do
  {:ok, new_temp} = Thermostat.inc_temperature(socket.assigns.id)
  {:noreply, assign(socket, :temperature, new_temp)}
end

To update UI state, for example, to open and close dropdowns, switch tabs, etc, LiveView also supports JS commands (Phoenix.LiveView.JS), which execute directly on the client without reaching the server. To learn more, see our bindings page for a complete list of all LiveView bindings as well as our JavaScript interoperability guide.

compartmentalize-state-markup-and-events-in-liveview

Compartmentalize state, markup, and events in LiveView

LiveView supports two extension mechanisms: function components, provided by HEEx templates, and stateful components.

Function components are any function that receives an assigns map, similar to render(assigns) in our LiveView, and returns a ~H template. For example:

def weather_greeting(assigns) do
  ~H"""
  <div title="My div" class={@class}>
    <p>Hello <%= @name %></p>
    <MyApp.Weather.city name="Kraków"/>
  </div>
  """
end

You can learn more about function components in the Phoenix.Component module. At the end of the day, they are useful mechanism to reuse markup in your LiveViews.

However, sometimes you need to compartmentalize or reuse more than markup. Perhaps you want to move part of the state or part of the events in your LiveView to a separate module. For these cases, LiveView provides Phoenix.LiveComponent, which are rendered using live_component/1:

<.live_component module={UserComponent} id={user.id} user={user} />

Components have their own mount/3 and handle_event/3 callbacks, as well as their own state with change tracking support. Components are also lightweight as they "run" in the same process as the parent LiveView. However, this means an error in a component would cause the whole view to fail to render. See Phoenix.LiveComponent for a complete rundown on components.

Finally, if you want complete isolation between parts of a LiveView, you can always render a LiveView inside another LiveView by calling live_render/3. This child LiveView runs in a separate process than the parent, with its own callbacks. If a child LiveView crashes, it won't affect the parent. If the parent crashes, all children are terminated.

When rendering a child LiveView, the :id option is required to uniquely identify the child. A child LiveView will only ever be rendered and mounted a single time, provided its ID remains unchanged.

Given that a LiveView runs on its own process, it is an excellent tool for creating completely isolated UI elements, but it is a slightly expensive abstraction if all you want is to compartmentalize markup or events (or both).

To sum it up:

endpoint-configuration

Endpoint configuration

LiveView accepts the following configuration in your endpoint under the :live_view key:

  • :signing_salt (required) - the salt used to sign data sent to the client

  • :hibernate_after (optional) - the idle time in milliseconds allowed in the LiveView before compressing its own memory and state. Defaults to 15000ms (15 seconds)

guides

Guides

LiveView has many guides to help you on your journey.

server-side

Server-side

These guides focus on server-side functionality:

client-side

Client-side

These guides focus on LiveView bindings and client-side integration:

Link to this section Summary

Callbacks

Invoked to handle calls from other Elixir processes.

Invoked to handle casts from other Elixir processes.

Invoked to handle events sent by the client.

Invoked to handle messages from other Elixir processes.

Invoked after mount and whenever there is a live patch event.

The LiveView entry-point.

Renders a template.

Invoked when the LiveView is terminating.

Functions

Uses LiveView in the current module to mark it a LiveView.

Allows an upload for the provided name.

Attaches the given fun by name for the lifecycle stage into socket.

Cancels an upload for the given entry.

Clears the flash.

Clears a key from the flash.

Returns true if the socket is connected.

Consumes the uploaded entries.

Consumes an individual uploaded entry.

Detaches a hook with the given name from the lifecycle stage.

Revokes a previously allowed upload from allow_upload/3.

Accesses a given connect info key from the socket.

Accesses the connect params sent by the client for use on connected mount.

Declares a module callback to be invoked on the LiveView's mount.

Pushes an event to the client.

Annotates the socket for navigation to another LiveView.

Annotates the socket for navigation within the current LiveView.

Annotates the socket for navigation to another LiveView.

Adds a flash message to the socket to be displayed.

Annotates the socket for redirect to a destination path.

Asynchronously updates a Phoenix.LiveComponent with new assigns.

Similar to send_update/3 but the update will be delayed according to the given time_in_milliseconds.

Returns true if the socket is connected and the tracked static assets have changed.

Returns the transport pid of the socket.

Returns the completed and in progress entries for the upload.

Link to this section Types

@type unsigned_params() :: map()

Link to this section Callbacks

Link to this callback

handle_call(msg, {}, socket)

View Source (optional)
@callback handle_call(
  msg :: term(),
  {pid(), reference()},
  socket :: Phoenix.LiveView.Socket.t()
) ::
  {:noreply, Phoenix.LiveView.Socket.t()}
  | {:reply, term(), Phoenix.LiveView.Socket.t()}

Invoked to handle calls from other Elixir processes.

See GenServer.call/3 and GenServer.handle_call/3 for more information.

Link to this callback

handle_cast(msg, socket)

View Source (optional)
@callback handle_cast(msg :: term(), socket :: Phoenix.LiveView.Socket.t()) ::
  {:noreply, Phoenix.LiveView.Socket.t()}

Invoked to handle casts from other Elixir processes.

See GenServer.cast/2 and GenServer.handle_cast/2 for more information. It must always return {:noreply, socket}, where :noreply means no additional information is sent to the process which cast the message.

Link to this callback

handle_event(event, unsigned_params, socket)

View Source (optional)
@callback handle_event(
  event :: binary(),
  unsigned_params(),
  socket :: Phoenix.LiveView.Socket.t()
) ::
  {:noreply, Phoenix.LiveView.Socket.t()}
  | {:reply, map(), Phoenix.LiveView.Socket.t()}

Invoked to handle events sent by the client.

It receives the event name, the event payload as a map, and the socket.

It must return {:noreply, socket}, where :noreply means no additional information is sent to the client, or {:reply, map(), socket}, where the given map() is encoded and sent as a reply to the client.

Link to this callback

handle_info(msg, socket)

View Source (optional)
@callback handle_info(msg :: term(), socket :: Phoenix.LiveView.Socket.t()) ::
  {:noreply, Phoenix.LiveView.Socket.t()}

Invoked to handle messages from other Elixir processes.

See Kernel.send/2 and GenServer.handle_info/2 for more information. It must always return {:noreply, socket}, where :noreply means no additional information is sent to the process which sent the message.

Link to this callback

handle_params(unsigned_params, uri, socket)

View Source (optional)
@callback handle_params(
  unsigned_params(),
  uri :: String.t(),
  socket :: Phoenix.LiveView.Socket.t()
) ::
  {:noreply, Phoenix.LiveView.Socket.t()}

Invoked after mount and whenever there is a live patch event.

It receives the current params, including parameters from the router, the current uri from the client and the socket. It is invoked after mount or whenever there is a live navigation event caused by push_patch/2 or <.link patch={...}>.

It must always return {:noreply, socket}, where :noreply means no additional information is sent to the client.

Link to this callback

mount(params, session, socket)

View Source (optional)
@callback mount(
  params :: unsigned_params() | :not_mounted_at_router,
  session :: map(),
  socket :: Phoenix.LiveView.Socket.t()
) ::
  {:ok, Phoenix.LiveView.Socket.t()}
  | {:ok, Phoenix.LiveView.Socket.t(), keyword()}

The LiveView entry-point.

For each LiveView in the root of a template, mount/3 is invoked twice: once to do the initial page load and again to establish the live socket.

It expects three arguments:

  • params - a map of string keys which contain public information that can be set by the user. The map contains the query params as well as any router path parameter. If the LiveView was not mounted at the router, this argument is the atom :not_mounted_at_router
  • session - the connection session
  • socket - the LiveView socket

It must return either {:ok, socket} or {:ok, socket, options}, where options is one of:

  • :temporary_assigns - a keyword list of assigns that are temporary and must be reset to their value after every render. Note that once the value is reset, it won't be re-rendered again until it is explicitly assigned

  • :layout - the optional layout to be used by the LiveView

@callback render(assigns :: Phoenix.LiveView.Socket.assigns()) ::
  Phoenix.LiveView.Rendered.t()

Renders a template.

This callback is invoked whenever LiveView detects new content must be rendered and sent to the client.

If you define this function, it must return a template defined via the Phoenix.Component.sigil_H/2.

If you don't define this function, LiveView will attempt to render a template in the same directory as your LiveView. For example, if you have a LiveView named MyApp.MyCustomView inside lib/my_app/live_views/my_custom_view.ex, Phoenix will look for a template at lib/my_app/live_views/my_custom_view.html.heex.

Link to this callback

terminate(reason, socket)

View Source (optional)
@callback terminate(reason, socket :: Phoenix.LiveView.Socket.t()) :: term()
when reason: :normal | :shutdown | {:shutdown, :left | :closed | term()}

Invoked when the LiveView is terminating.

In case of errors, this callback is only invoked if the LiveView is trapping exits. See GenServer.terminate/2 for more info.

Link to this section Functions

Link to this macro

__using__(opts)

View Source (macro)

Uses LiveView in the current module to mark it a LiveView.

use Phoenix.LiveView,
  namespace: MyAppWeb,
  container: {:tr, class: "colorized"},
  layout: {MyAppWeb.LayoutView, "live.html"},
  log: :info

options

Options

  • :namespace - configures the namespace the LiveView is in
  • :container - configures the container the LiveView will be wrapped in
  • :layout - configures the layout the LiveView will be rendered in
  • :log - configures the log level for the LiveView
  • :global_prefixes - the global prefixes to use for components. See Global Attributes in Phoenix.Component for more information.
Link to this function

allow_upload(socket, name, options)

View Source

Allows an upload for the provided name.

options

Options

  • :accept - Required. A list of unique file type specifiers or the atom :any to allow any kind of file. For example, [".jpeg"], :any, etc.

  • :max_entries - The maximum number of selected files to allow per file input. Defaults to 1.

  • :max_file_size - The maximum file size in bytes to allow to be uploaded. Defaults 8MB. For example, 12_000_000.

  • :chunk_size - The chunk size in bytes to send when uploading. Defaults 64_000.

  • :chunk_timeout - The time in milliseconds to wait before closing the upload channel when a new chunk has not been received. Defaults 10_000.

  • :external - The 2-arity function for generating metadata for external client uploaders. See the Uploads section for example usage.

  • :progress - The optional 3-arity function for receiving progress events

  • :auto_upload - Instructs the client to upload the file automatically on file selection instead of waiting for form submits. Default false.

Raises when a previously allowed upload under the same name is still active.

examples

Examples

allow_upload(socket, :avatar, accept: ~w(.jpg .jpeg), max_entries: 2)
allow_upload(socket, :avatar, accept: :any)

For consuming files automatically as they are uploaded, you can pair auto_upload: true with a custom progress function to consume the entries as they are completed. For example:

allow_upload(socket, :avatar, accept: :any, progress: &handle_progress/3, auto_upload: true)

defp handle_progress(:avatar, entry, socket) do
  if entry.done? do
    uploaded_file =
      consume_uploaded_entry(socket, entry, fn %{} = meta ->
        {:ok, ...}
      end)

    {:noreply, put_flash(socket, :info, "file #{uploaded_file.name} uploaded")}
  else
    {:noreply, socket}
  end
end
Link to this function

attach_hook(socket, name, stage, fun)

View Source

Attaches the given fun by name for the lifecycle stage into socket.

Note: This function is for server-side lifecycle callbacks. For client-side hooks, see the JS Interop guide.

Hooks provide a mechanism to tap into key stages of the LiveView lifecycle in order to bind/update assigns, intercept events, patches, and regular messages when necessary, and to inject common functionality. Hooks may be attached to any of the following lifecycle stages: :mount (via on_mount/1), :handle_params, :handle_event, and :handle_info.

return-values

Return Values

Lifecycle hooks take place immediately before a given lifecycle callback is invoked on the LiveView. A hook may return {:halt, socket} to halt the reduction, otherwise it must return {:cont, socket} so the operation may continue until all hooks have been invoked for the current stage.

halting-the-lifecycle

Halting the lifecycle

Note that halting from a hook will halt the entire lifecycle stage. This means that when a hook returns {:halt, socket} then the LiveView callback will not be invoked. This has some implications.

implications-for-plugin-authors

Implications for plugin authors

When defining a plugin that matches on specific callbacks, you must define a catch-all clause, as your hook will be invoked even for events you may not be interested on.

implications-for-end-users

Implications for end-users

Allowing a hook to halt the invocation of the callback means that you can attach hooks to intercept specific events before detaching themselves, while allowing other events to continue normally.

examples

Examples

def mount(_params, _session, socket) do
  socket =
    attach_hook(socket, :my_hook, :handle_event, fn
      "very-special-event", _params, socket ->
        # Handle the very special event and then detach the hook
        {:halt, detach_hook(socket, :my_hook, :handle_event)}

      _event, _params, socket ->
        {:cont, socket}
    end)

  {:ok, socket}
end
Link to this function

cancel_upload(socket, name, entry_ref)

View Source

Cancels an upload for the given entry.

examples

Examples

<%= for entry <- @uploads.avatar.entries do %>
  ...
  <button phx-click="cancel-upload" phx-value-ref="<%= entry.ref %>">cancel</button>
<% end %>

def handle_event("cancel-upload", %{"ref" => ref}, socket) do
  {:noreply, cancel_upload(socket, :avatar, ref)}
end

Clears the flash.

examples

Examples

iex> clear_flash(socket)
Link to this function

clear_flash(socket, key)

View Source

Clears a key from the flash.

examples

Examples

iex> clear_flash(socket, :info)

Returns true if the socket is connected.

Useful for checking the connectivity status when mounting the view. For example, on initial page render, the view is mounted statically, rendered, and the HTML is sent to the client. Once the client connects to the server, a LiveView is then spawned and mounted statefully within a process. Use connected?/1 to conditionally perform stateful work, such as subscribing to pubsub topics, sending messages, etc.

examples

Examples

defmodule DemoWeb.ClockLive do
  use Phoenix.LiveView
  ...
  def mount(_params, _session, socket) do
    if connected?(socket), do: :timer.send_interval(1000, self(), :tick)

    {:ok, assign(socket, date: :calendar.local_time())}
  end

  def handle_info(:tick, socket) do
    {:noreply, assign(socket, date: :calendar.local_time())}
  end
end
Link to this function

consume_uploaded_entries(socket, name, func)

View Source

Consumes the uploaded entries.

Raises when there are still entries in progress. Typically called when submitting a form to handle the uploaded entries alongside the form data. For form submissions, it is guaranteed that all entries have completed before the submit event is invoked. Once entries are consumed, they are removed from the upload.

The function passed to consume may return a tagged tuple of the form {:ok, my_result} to collect results about the consumed entries, or {:postpone, my_result} to collect results, but postpone the file consumption to be performed later.

examples

Examples

def handle_event("save", _params, socket) do
  uploaded_files =
    consume_uploaded_entries(socket, :avatar, fn %{path: path}, _entry ->
      dest = Path.join("priv/static/uploads", Path.basename(path))
      File.cp!(path, dest)
      {:ok, Routes.static_path(socket, "/uploads/#{Path.basename(dest)}")}
    end)
  {:noreply, update(socket, :uploaded_files, &(&1 ++ uploaded_files))}
end
Link to this function

consume_uploaded_entry(socket, entry, func)

View Source

Consumes an individual uploaded entry.

Raises when the entry is still in progress. Typically called when submitting a form to handle the uploaded entries alongside the form data. Once entries are consumed, they are removed from the upload.

This is a lower-level feature than consume_uploaded_entries/3 and useful for scenarios where you want to consume entries as they are individually completed.

Like consume_uploaded_entries/3, the function passed to consume may return a tagged tuple of the form {:ok, my_result} to collect results about the consumed entries, or {:postpone, my_result} to collect results, but postpone the file consumption to be performed later.

examples

Examples

def handle_event("save", _params, socket) do
  case uploaded_entries(socket, :avatar) do
    {[_|_] = entries, []} ->
      uploaded_files = for entry <- entries do
        consume_uploaded_entry(socket, entry, fn %{path: path} ->
          dest = Path.join("priv/static/uploads", Path.basename(path))
          File.cp!(path, dest)
          {:ok, Routes.static_path(socket, "/uploads/#{Path.basename(dest)}")}
        end)
      end
      {:noreply, update(socket, :uploaded_files, &(&1 ++ uploaded_files))}

    _ ->
      {:noreply, socket}
  end
end
Link to this function

detach_hook(socket, name, stage)

View Source

Detaches a hook with the given name from the lifecycle stage.

Note: This function is for server-side lifecycle callbacks. For client-side hooks, see the JS Interop guide.

If no hook is found, this function is a no-op.

examples

Examples

def handle_event(_, socket) do
  {:noreply, detach_hook(socket, :hook_that_was_attached, :handle_event)}
end
Link to this function

disallow_upload(socket, name)

View Source

Revokes a previously allowed upload from allow_upload/3.

examples

Examples

disallow_upload(socket, :avatar)
Link to this function

get_connect_info(socket)

View Source
This function is deprecated. use get_connect_info/2 instead.
Link to this function

get_connect_info(socket, key)

View Source

Accesses a given connect info key from the socket.

The following keys are supported: :peer_data, :trace_context_headers, :x_headers, :uri, and :user_agent.

The connect information is available only during mount. During disconnected render, all keys are available. On connected render, only the keys explicitly declared in your socket are available. See Phoenix.Endpoint.socket/3 for a complete description of the keys.

examples

Examples

The first step is to declare the connect_info you want to receive. Typically, it includes at least the session, but you must include all other keys you want to access on connected mount, such as :peer_data:

socket "/live", Phoenix.LiveView.Socket,
  websocket: [connect_info: [:peer_data, session: @session_options]]

Those values can now be accessed on the connected mount as get_connect_info/2:

def mount(_params, _session, socket) do
  peer_data = get_connect_info(socket, :peer_data)
  {:ok, assign(socket, ip: peer_data.address)}
end

If the key is not available, usually because it was not specified in connect_info, it returns nil.

Link to this function

get_connect_params(socket)

View Source

Accesses the connect params sent by the client for use on connected mount.

Connect params are only sent when the client connects to the server and only remain available during mount. nil is returned when called in a disconnected state and a RuntimeError is raised if called after mount.

reserved-params

Reserved params

The following params have special meaning in LiveView:

  • "_csrf_token" - the CSRF Token which must be explicitly set by the user when connecting
  • "_mounts" - the number of times the current LiveView is mounted. It is 0 on first mount, then increases on each reconnect. It resets when navigating away from the current LiveView or on errors
  • "_track_static" - set automatically with a list of all href/src from tags with the phx-track-static annotation in them. If there are no such tags, nothing is sent
  • "_live_referer" - sent by the client as the referer URL when a live navigation has occurred from push_navigate or client link navigate.

examples

Examples

def mount(_params, _session, socket) do
  {:ok, assign(socket, width: get_connect_params(socket)["width"] || @width)}
end
Link to this macro

on_mount(mod_or_mod_arg)

View Source (macro)

Declares a module callback to be invoked on the LiveView's mount.

The function within the given module, which must be named on_mount, will be invoked before both disconnected and connected mounts. The hook has the option to either halt or continue the mounting process as usual. If you wish to redirect the LiveView, you must halt, otherwise an error will be raised.

Tip: if you need to define multiple on_mount callbacks, avoid defining multiple modules. Instead, pass a tuple and use pattern matching to handle different cases:

def on_mount(:admin, _params, _session, socket) do
  {:cont, socket}
end

def on_mount(:user, _params, _session, socket) do
  {:cont, socket}
end

And then invoke it as:

on_mount {MyAppWeb.SomeHook, :admin}
on_mount {MyAppWeb.SomeHook, :user}

Registering on_mount hooks can be useful to perform authentication as well as add custom behaviour to other callbacks via attach_hook/4.

examples

Examples

The following is an example of attaching a hook via Phoenix.LiveView.Router.live_session/3:

# lib/my_app_web/live/init_assigns.ex
defmodule MyAppWeb.InitAssigns do
  @moduledoc """
  Ensures common `assigns` are applied to all LiveViews attaching this hook.
  """
  import Phoenix.LiveView
  import Phoenix.Component

  def on_mount(:default, _params, _session, socket) do
    {:cont, assign(socket, :page_title, "DemoWeb")}
  end

  def on_mount(:user, params, session, socket) do
    # code
  end

  def on_mount(:admin, params, session, socket) do
    # code
  end
end

# lib/my_app_web/router.ex
defmodule MyAppWeb.Router do
  use MyAppWeb, :router

  # pipelines, plugs, etc.

  live_session :default, on_mount: MyAppWeb.InitAssigns do
    scope "/", MyAppWeb do
      pipe_through :browser
      live "/", PageLive, :index
    end
  end

  live_session :authenticated, on_mount: {MyAppWeb.InitAssigns, :user} do
    scope "/", MyAppWeb do
      pipe_through [:browser, :require_user]
      live "/profile", UserLive.Profile, :index
    end
  end

  live_session :admins, on_mount: {MyAppWeb.InitAssigns, :admin} do
    scope "/admin", MyAppWeb.Admin do
      pipe_through [:browser, :require_user, :require_admin]
      live "/", AdminLive.Index, :index
    end
  end
end
Link to this function

push_event(socket, event, payload)

View Source

Pushes an event to the client.

Events can be handled in two ways:

  1. They can be handled on window via addEventListener. A "phx:" prefix will be added to the event name.

  2. They can be handled inside a hook via handleEvent.

Note that events are dispatched to all active hooks on the client who are handling the given event. If you need to scope events, then this must be done by namespacing them.

hook-example

Hook example

If you push a "scores" event from your LiveView:

{:noreply, push_event(socket, "scores", %{points: 100, user: "josé"})}

A hook declared via phx-hook can handle it via handleEvent:

this.handleEvent("scores", data => ...)

window-example

window example

All events are also dispatched on the window. This means you can handle them by adding listeners. For example, if you want to remove an element from the page, you can do this:

{:noreply, push_event(socket, "remove-el", %{id: "foo-bar"})}

And now in your app.js you can register and handle it:

window.addEventListener(
  "phx:remove-el",
  e => document.getElementById(e.detail.id).remove()
)
Link to this function

push_navigate(socket, opts)

View Source

Annotates the socket for navigation to another LiveView.

The current LiveView will be shutdown and a new one will be mounted in its place, without reloading the whole page. This can also be used to remount the same LiveView, in case you want to start fresh. If you want to navigate to the same LiveView without remounting it, use push_patch/2 instead.

options

Options

  • :to - the required path to link to. It must always be a local path
  • :replace - the flag to replace the current history or push a new state. Defaults false.

examples

Examples

{:noreply, push_navigate(socket, to: "/")}
{:noreply, push_navigate(socket, to: "/", replace: true)}
Link to this function

push_patch(socket, opts)

View Source

Annotates the socket for navigation within the current LiveView.

When navigating to the current LiveView, handle_params/3 is immediately invoked to handle the change of params and URL state. Then the new state is pushed to the client, without reloading the whole page while also maintaining the current scroll position. For live navigation to another LiveView, use push_navigate/2.

options

Options

  • :to - the required path to link to. It must always be a local path
  • :replace - the flag to replace the current history or push a new state. Defaults false.

examples

Examples

{:noreply, push_patch(socket, to: "/")}
{:noreply, push_patch(socket, to: "/", replace: true)}
Link to this function

push_redirect(socket, opts)

View Source
This function is deprecated. Use push_navigate/2 instead.

Annotates the socket for navigation to another LiveView.

The current LiveView will be shutdown and a new one will be mounted in its place, without reloading the whole page. This can also be used to remount the same LiveView, in case you want to start fresh. If you want to navigate to the same LiveView without remounting it, use push_patch/2 instead.

options

Options

  • :to - the required path to link to. It must always be a local path
  • :replace - the flag to replace the current history or push a new state. Defaults false.

examples

Examples

{:noreply, push_redirect(socket, to: "/")}
{:noreply, push_redirect(socket, to: "/", replace: true)}
Link to this function

put_flash(socket, kind, msg)

View Source

Adds a flash message to the socket to be displayed.

Note: While you can use put_flash/3 inside a Phoenix.LiveComponent, components have their own @flash assigns. The @flash assign in a component is only copied to its parent LiveView if the component calls push_navigate/2 or push_patch/2.

Note: You must also place the Phoenix.LiveView.Router.fetch_live_flash/2 plug in your browser's pipeline in place of fetch_flash for LiveView flash messages be supported, for example:

import Phoenix.LiveView.Router

pipeline :browser do
  ...
  plug :fetch_live_flash
end

examples

Examples

iex> put_flash(socket, :info, "It worked!")
iex> put_flash(socket, :error, "You can't access that page")
Link to this function

redirect(socket, opts \\ [])

View Source

Annotates the socket for redirect to a destination path.

Note: LiveView redirects rely on instructing client to perform a window.location update on the provided redirect location. The whole page will be reloaded and all state will be discarded.

options

Options

  • :to - the path to redirect to. It must always be a local path
  • :external - an external path to redirect to. Either a string or {scheme, url} to redirect to a custom scheme
Link to this function

send_update(pid \\ self(), module, assigns)

View Source

Asynchronously updates a Phoenix.LiveComponent with new assigns.

The :id that identifies the component must be passed as part of the assigns and it will be used to identify the live components to be updated.

The pid argument is optional and it defaults to the current process, which means the update instruction will be sent to a component running on the same LiveView. If the current process is not a LiveView or you want to send updates to a live component running on another LiveView, you should explicitly pass the LiveView's pid instead.

When the component receives the update, first the optional preload/1 then update/2 is invoked with the new assigns. If update/2 is not defined all assigns are simply merged into the socket.

While a component may always be updated from the parent by updating some parent assigns which will re-render the child, thus invoking update/2 on the child component, send_update/3 is useful for updating a component that entirely manages its own state, as well as messaging between components mounted in the same LiveView.

examples

Examples

def handle_event("cancel-order", _, socket) do
  ...
  send_update(Cart, id: "cart", status: "cancelled")
  {:noreply, socket}
end

def handle_event("cancel-order-asynchronously", _, socket) do
  ...
  pid = self()

  Task.start(fn ->
    # Do something asynchronously
    send_update(pid, Cart, id: "cart", status: "cancelled")
  end)

  {:noreply, socket}
end
Link to this function

send_update_after(pid \\ self(), module, assigns, time_in_milliseconds)

View Source

Similar to send_update/3 but the update will be delayed according to the given time_in_milliseconds.

examples

Examples

def handle_event("cancel-order", _, socket) do
  ...
  send_update_after(Cart, [id: "cart", status: "cancelled"], 3000)
  {:noreply, socket}
end

def handle_event("cancel-order-asynchronously", _, socket) do
  ...
  pid = self()

  Task.start(fn ->
    # Do something asynchronously
    send_update_after(pid, Cart, [id: "cart", status: "cancelled"], 3000)
  end)

  {:noreply, socket}
end

Returns true if the socket is connected and the tracked static assets have changed.

This function is useful to detect if the client is running on an outdated version of the marked static files. It works by comparing the static paths sent by the client with the one on the server.

Note: this functionality requires Phoenix v1.5.2 or later.

To use this functionality, the first step is to annotate which static files you want to be tracked by LiveView, with the phx-track-static. For example:

<link phx-track-static rel="stylesheet" href="<%= Routes.static_path(@conn, "/css/app.css") %>"/>
<script defer phx-track-static type="text/javascript" src="<%= Routes.static_path(@conn, "/js/app.js") %>"></script>

Now, whenever LiveView connects to the server, it will send a copy src or href attributes of all tracked statics and compare those values with the latest entries computed by mix phx.digest in the server.

The tracked statics on the client will match the ones on the server the huge majority of times. However, if there is a new deployment, those values may differ. You can use this function to detect those cases and show a banner to the user, asking them to reload the page. To do so, first set the assign on mount:

def mount(params, session, socket) do
  {:ok, assign(socket, static_changed?: static_changed?(socket))}
end

And then in your views:

<%= if @static_changed? do %>
  <div id="reload-static">
    The app has been updated. Click here to <a href="#" onclick="window.location.reload()">reload</a>.
  </div>
<% end %>

If you prefer, you can also send a JavaScript script that immediately reloads the page.

Note: only set phx-track-static on your own assets. For example, do not set it in external JavaScript files:

<script defer phx-track-static type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/3.4.1/jquery.min.js"></script>

Because you don't actually serve the file above, LiveView will interpret the static above as missing, and this function will return true.

Returns the transport pid of the socket.

Raises ArgumentError if the socket is not connected.

examples

Examples

iex> transport_pid(socket)
#PID<0.107.0>
Link to this function

uploaded_entries(socket, name)

View Source

Returns the completed and in progress entries for the upload.

examples

Examples

case uploaded_entries(socket, :photos) do
  {[_ | _] = completed, []} ->
    # all entries are completed

  {[], [_ | _] = in_progress} ->
    # all entries are still in progress
end